1. Introduction
The Kamvas 13 (Gen 3) is a new generation of creative drawing pen displays featuring dual side-mounted dial controllers for designers. Boasting high performance and versatility, it provides an unparalleled drawing and creation experience. This model enhances screen color accuracy, upgrades pen technology, and improves connection stability, making it an ideal choice for beginner artists seeking quality and affordability.
Key Features:
- 13.3-inch FHD Screen
- 16K Levels Pen Pressure with PenTech 4.0
- 99% sRGB / 99% Rec.709 / 90% Adobe RGB Color Gamut Coverage
- All-New Canvas Glass with Anti-Glare, Anti-Sparkle, Full-Lamination, and Textured-Surface
- Dual Dials and 5 Silent Press Keys for enhanced productivity
- Stable Cable Connection with dual-interface design (3-in-1 USB-C Port and Full-Featured USB-C Port)
- Symmetrical design for both left-handed and right-handed users

2. Package Contents
Please check the package contents upon unpacking to ensure all items are present:

- Kamvas 13 (Gen 3) Pen Display x 1
- 3-in-1 Cable (1.8m) x 1
- USB-A Extension Cable (1.2m) x 1
- PW600L Digital Pen x 1
- PH06 Pen Holder x 1
- PN06 Pen Nib x 10 (Included in the pen holder)
- ST300 Stand x 1 (Optional, depending on purchase variant)
- Cleaning Cloth x 1
- Glove x 1
- Quick Start Guide x 1
3. Setup and Connection
The pen display can be connected to computers and Android devices. Refer to the following connection methods.
3.1. Connect via a 3-in-1 Cable
- Connect the USB-C cable of the 3-in-1 cable to the first USB-C port on the side of the pen display.
- Connect the USB-A cable, HDMI cable, and USB-A power cable on the other end of the 3-in-1 cable to the corresponding ports on your computer.

3.2. Connect via a Full-featured USB-C Cable
- Plug one end of the full-featured USB-C cable into the second USB-C port on the side of the pen display and the other end into the USB-C port that supports graphic output on your computer/tablet/mobile phone.
- If the screen does not light up, or if screen flicker or black screen issues occur, please plug one end of the USB-C power cable into the first USB-C port on the side of the pen display and the other end into a power adapter to provide necessary additional power.
Tip: A full-featured USB-C cable and power cable need to be purchased separately. The connected device's interface should support USB 3.1 GEN1 data transfer protocol and DP 1.2 or later, with a power supply of at least 5V/2A. If your device is low on power, an additional power supply is required for stable connection.
3.3. Stand Installation and Usage
To enhance the user experience, an ergonomically adjustable ST300 stand is optional. You can adjust the stand between 20° and 50° (6 adjustable angles) for a more comfortable experience.
4. Driver Installation
Note: Before installing the driver, please close all graphic software and antivirus programs. If the driver is blocked, it may prevent proper functionality. Ensure your operating system is up to date (Windows 10 or later, macOS 10.12 or later, Ubuntu 20.04 LTS or later for Linux). If connection fails, restart the driver or your computer. Reinstalling the driver will restore default settings if issues arise.
4.1. Windows Installation
- Connect the pen display to your computer.
- Download the latest driver for Kamvas 13 from the official HUION website.
- Double-click the driver file and click "OK" to proceed.
- Check the box to agree with the User Agreement and click "Install Now".
- After installation, a picture of Kamvas 13 GS1333 will appear on the driver interface, indicating a successful connection.
4.2. macOS Installation
- Connect the pen display to your Mac.
- Download the latest driver for Kamvas 13 from the official HUION website.
- Unzip the driver file and drag the "Huion Tablet" icon into the "Applications" folder.
- Open the Applications folder and double-click the Huion Tablet driver application.
- When prompted, click "Open System Preferences". Go to Security & Privacy > Privacy > Accessibility settings. Click the lock icon to unlock settings, tick the checkbox next to the HuionTablet driver application to enable accessibility, then click the lock icon to lock settings.
- A picture of Kamvas 13 GS1333 will appear on the driver interface, indicating a successful connection.
4.3. Linux (Ubuntu) Installation
Note: Close the command window and reboot your Linux device after installing the driver. If running on VMware, use VMware Workstation Pro. Some Ubuntu versions may not support multiple monitors simultaneously; upgrade to 20.04LTS or later for smoother multi-display use.
Huion Tablet Driver installation packages are available in .tar.xz and .deb formats.
4.3.1. Installing .tar.xz format
- Extract the contents of the driver file (e.g.,
huiontablet_XXXX.tar.xz) into a folder. - Open the command window in that folder.
- Input the command:
sudo sh install.shand press Enter. - Enter your user password to complete the installation.
- Reboot your Linux device.
4.3.2. Installing .deb format
- Open the folder and double-click the driver file in
.debformat to enter the system's application store interface, then click to install. - Enter your user password to complete the installation.
- Reboot your Linux device.
4.3.3. Uninstalling Drivers (Linux)
- Open the command window in the driver folder.
- Input the command:
sudo sh uninstall.shand press Enter. - Enter your user password to complete the uninstallation.
5. Functions Overview

| No. | Item | Instruction |
|---|---|---|
| ① | Power Button + Indicator Light |
|
| ②④ | Function-switch Button A + Dial Controller A Function-switch Button B + Dial Controller B |
|
| ③ | Press Key | When the driver is not installed or started, press keys perform default functions. Once the driver is installed and started, you can customize press key functions in the driver according to your personal preferences. |
| ⑤ | USB-C Port | Connect the pen display to your computer via this port using a 3-in-1 cable. |
| ⑥ | Full-functioned Type-C Port | Connect the pen display to your computer via this port using a full-featured USB-C cable. This port supports graphic input. |
6. How to Use the Digital Pen (PW600L)
The digital pen enables seamless user-device interaction, allowing you to draw, write, move objects, and use customizable pen button functions.

6.1. Holding the Pen
Hold the digital pen as you would a real pen. Adjust your grip so you can easily toggle the pen press keys with your thumb or index finger. Be careful not to accidentally press the key while drawing.
Note: Do not place the digital pen on the pen display when not in use, as it may cause interference or prevent the computer from entering sleep mode.
6.2. Cursor Movement
Move the pen slightly above the working area of the pen display without touching the surface. The cursor on the screen will move to the new position accordingly.
6.3. Click and Move
- Click: Tap on the working area with the pen tip to register a click, select, or highlight.
- Long Press & Drag: Long press and drag the pen tip to move a selected item.
- Double-Click: Double-click to open a selected item.
- Move: Select an icon or file with the pen tip, then slide the pen tip across the screen to move it to the target location.
6.4. Using Pen Buttons
The digital pen supports customizable pen button functions. These buttons will work as long as the vertical distance between the pen tip and the display screen is within the sensing height (10mm). You can disable pen button functions by setting them to "No function" in the driver.
6.5. Replacing the Pen Nib
When the nib of the digital pen is worn, replace it with a new one:
- Open the pen holder and take out a replacement nib.
- Tilt the pen and pull out the worn nib using the built-in nib clip on the back of the pen holder.
- Insert a replacement nib straight into the barrel of the pen until it stops moving forward.
7. Driver Settings and Functions
The Huion driver provides extensive customization options for your Kamvas 13 (Gen 3).
7.1. Driver Interface Overview
The driver interface is divided into several sections: Pen Display, Digital Pen, and Store.
- Pen Display: Customize functions of the display, including Press Key and Working Area Set.
- Digital Pen: Customize functions of the pen, including Press Key, Mode selection, Pressure Sensitivity Adjustment, and Pressure Test.
- Store: Access product information, FAQs, and purchase accessories.
7.2. Pen Display Settings
7.2.1. Press Key Customization
You can customize the functions of the display's press keys. Uncheck "Enable press keys" to turn off these functions. Hover over a button to see its default value. Click a button to open a dialog box and set its function.
Functions can be set as: Keyboard Key, Mouse Key, Tool, Run Program, System Application, Multimedia, Precision Mode, Pan/Scroll, Quick Menu, Fixed Pressure Sensitivity, or None.
7.2.2. Working Area Setting
Adjust the ratio of pen movement on the display to cursor movement on the monitor. Options include:
- Full Area: The entire active area maps to the whole monitor (default).
- Screen Ratio: The active area ratio matches the monitor's ratio (e.g., 16:9).
- Custom Area: Enter coordinate values or drag outlines to define a custom working area.
7.2.3. Rotate Working Area
Change the orientation of the pen display to adapt to left- or right-handed operation. You can rotate the display by 0°, 90°, 180°, or 270°.
7.2.4. Calibrate Your Pen Display
Click the "Monitor Calibration" tab and follow instructions to calibrate. Use the digital pen to click the center red dot of the cross in a common pen-holding posture. You can cancel calibration or restore default settings.
7.3. Digital Pen Settings
7.3.1. Press Key Customization
The setting of the pen press keys is the same as the Press Key setting for the display.
7.3.2. Pen Nib Activity
Set the pen nib as "Valid" or "Invalid". In Valid mode, the pen performs clicks, double-clicks, and dragging. In Invalid mode, it controls cursor movement but not specified actions.
7.3.3. Enable Windows Ink
Tick "Enable Windows Ink" to support pen features in software like Microsoft Office, Windows Whiteboard, and Adobe Photoshop CC. (Note: macOS and Linux OS do not support this feature).
7.3.4. Pressure Sensitivity Adjustment
Adjust the pressure sensitivity level by dragging the slider or choosing from five options (soft to hard). Click the redo button to revert to default. Test by drawing lines in the Pressure Test box.
7.4. General Driver Settings
7.4.1. Device Information
View firmware information and connected product details.
7.4.2. Backup Settings
Backup and restore all device settings. Export current settings locally or import configuration files.
7.4.3. General Options
- Language: Switch between 14 languages.
- Color: Select driver interface color (Dark, Blue, Light).
- Start Menu: Enable/disable "New Message Alert", "Auto-Start", "Automatic Updates".
- Hotkey: Set a hotkey to quickly open the driver interface.
- Switch Screen: Set a hotkey to switch between monitors.
- Administrator privilege: (Windows only) Indicates if the driver is running with admin privileges.
7.4.4. About
Check driver version, update, send feedback, or uninstall the driver. Use "Software Diagnosis" for troubleshooting.
7.5. Dial Setting
The dial controllers can be set to a customize mode or used with the Windows Radial menu.
7.5.1. Customize Mode
Dual dial controllers can be programmed independently. Open the driver, click "Dial Setting" and choose Dial1/Dial2 to set its function. Each dial can have multiple groups of functions, switched by pressing the center key.
Default functions include "Zoom in/out", "Adjust Brush Size", and "Scroll Up/Down". You can also set them for specific applications like Photoshop, Lightroom, Premiere, Clip Studio Paint, and TVPaint Animation.
7.5.2. Radial Mode
Radial mode is for Windows operating systems without drivers installed or enabled. Functional configurations of the dual dial controllers are the same.
- Ensure the driver is not installed or started.
- Go to Windows Settings > Devices > Wheel.
- Choose default tools for the Radial menu or customize them.
- Turn the dial controller clockwise or anti-clockwise to use it.
Tip: On Windows 10 or later, the dial controller in Radial mode can adjust size, opacity, flow, smoothing, and control of brush-like tools in Photoshop. Press and hold the function-switch button for 3s to bring up the Radial menu, then select the brush icon by rotating the dial controller. Press the function-switch button to confirm. When the "Brush Settings" panel appears, rotate the dial controller to select functions (size, opacity, flow, smoothing, control), press the function-switch button, then rotate the dial controller to adjust the parameter.
9. Troubleshooting
If you encounter any issues, refer to the table below for common problems and solutions. For further assistance, please visit the Huion support website or email service@huion.com.
| Problem | Solution |
|---|---|
| Pen tablet cannot sense pen pressure while cursor moves. | Uninstall other drivers/drawing software, reinstall Huion driver, restart computer. Ensure application supports pressure sensitivity. |
| Digital pen does not work. | 1. Ensure you are using the original pen. 2. Verify driver installation. |
| Press key does not work. | 1. Ensure you are using the original pen. 2. Verify driver installation. |
| Computer cannot enter sleeping mode. | Do not place the digital pen on the working area of the pen display when not in use. |
| Press key of the digital pen does not work. | Ensure pen nib is within 10mm of tablet. Check driver settings for assigned functions. If problem persists, pen may be broken; contact service. |
| Computer cannot recognize the pen display. / "Device Disconnected" appears. | Restart computer/driver. Check USB port and cables. Try another USB port. Reinstall latest driver. Whitelist driver on macOS. |
10. Specifications
Detailed technical specifications for the Huion Kamvas 13 (Gen 3) Pen Display:
| Feature | Specification |
|---|---|
| Model Name | Kamvas 13 (Gen 3) |
| Type | Pen Tablet Monitor / Digital Tablets |
| Screen Size | 13.3 Inch |
| Resolution | FHD (1920 x 1080) |
| Resolution Ratio | 5080 LPI |
| Color Gamut Coverage | 99% sRGB / 99% Rec.709 / 90% Adobe RGB |
| Color Accuracy | ΔE < 1.5 |
| Display Color | 16.7 Million |
| Glass Type | Nano-Etched Canvas Glass (Anti-Glare, Anti-Sparkle, Full-Lamination, Textured-Surface) |
| Digital Pen | PW600L (Battery-free) |
| Pen Technology | PenTech 4.0 |
| Pressure Levels | 16384 Levels |
| Initial Activation Force | 2g |
| Retraction Distance | 0.35mm |
| Press Keys | 5 Programmable Press Keys, 2 Dial Controllers, 2 Function-switch buttons |
| Interface Type | USB-C (3-in-1 Port), Full-Featured USB-C Port |
| OS Support | Windows 10 or later, macOS 10.12 or later, Android 6.0 or later (USB 3.1 + DP 1.2), Linux (Ubuntu 20.04 LTS) |
| Active Area | 293.8 x 165.2mm |
| Dimension | 361.21 x 202.77 x 11.7mm |
| Net Weight | 890g |
| Battery Included | No |
| Certification | CE |
11. User Tips
- Cable Management: Consider purchasing a full-featured USB-C to USB-C cable (Thunderbolt compatible) for a cleaner setup, as the included 3-in-1 cable can be bulky. Ensure any third-party USB-C cable supports USB 3.1 Gen1 and DP 1.2 or above.
- Screen Clarity: The display offers excellent image clarity. Take advantage of the color calibration report included to ensure accurate color representation in your artwork.
- Driver Installation: Always close all graphic software and antivirus programs before installing the driver to prevent conflicts. Reboot your system after installation, especially for Linux.
- Pen Nibs: The PW600L pen comes with 8 replacement nibs. Replace worn nibs promptly for optimal drawing experience.
- Stand Usage: If you have the optional ST300 stand, experiment with its 6 adjustable angles (20° to 50°) to find the most comfortable working position.
- No Fan Noise: The Kamvas 13 (Gen 3) does not have an internal fan, so you won't experience any fan noise during operation.
12. Warranty and Support
For detailed warranty information, please refer to the official Huion website or the warranty card included in your product packaging. For technical support, driver downloads, FAQs, and other resources, please visit the official Huion support page:
https://support.huion.com/en/support/home
You can also view the comprehensive user manual in PDF format for more in-depth instructions and diagrams: