GOYOJO GRL Series (GRL325, GRL335)

Contents

GOYOJO GRL Series Thermal Imaging Scope User Manual

Models: GRL325, GRL335

1. Introduction

1.1 Product Description

The GOYOJO GRL series thermal imaging scopes are designed for all-weather conditions, particularly suitable for hunting wild boar and coyote. These devices feature high-performance thermal imaging sensors powered by Goyojo's military-grade quad-core processor, delivering reliable image intelligence algorithms. The system performs exceptionally well in extreme environments including deserts, swamps, jungles, rain, fog, and snow.

Key Features

  • Auto-Adaptive Imaging Intelligence: Scene-specific optimization without manual adjustment.
  • Crystal-Clear Imaging: Exceptional image purity with precise recognition and sharp texture detail.
  • Precision Thermal Tracking: Instant response, pinpoint accuracy, and multi-target detection.
  • Classic & Thermal Zero One Shot: Available in both traditional optical sight and thermal imaging versions for a natural user experience and greater versatility.
  • Sub-25mK Thermal Sensitivity.
  • 384*288 High-Performance Thermal Detector.
  • 1024*768 OLED Display.
  • Fast 55 Hz Imaging Refresh Rate.
  • Ultra-Long Range Detection: 1500m (GRL325) / 1800m (GRL335).
  • Built-In 64GB SD Card.
  • 6-8 Hours Battery Life.
  • Optical Zoom Options: 3X-12X (GRL325) / 4X-16X (GRL335).
  • RAV & Wi-Fi Application.
GOYOJO GRL Series Thermal Imaging Scope with WiFi and video recording icons
Figure 1: GOYOJO GRL Series Thermal Imaging Scope highlighting WiFi direct connection and video recording capabilities.
Thermal scope with key features: 35mm lens, 6 image modes, 4-16X zoom, RAV & 64GB storage, PIP, 6-8 hour battery life.
Figure 2: Key features of the GRL Series Thermal Imaging Scope, including lens size, image modes, zoom, storage, Picture-in-Picture, and battery life.

Important Safety Information

WARNING: PLEASE READ BEFORE USE

  • ► Do not look directly at a strong light source, as this may cause permanent damage to your eyes!
  • ► Children must use this product under parental supervision. Keep packaging materials (e.g., plastic bags, rubber bands, etc.) away from children, otherwise there is a risk of choking!
  • ► Do not place the product in high temperature and direct sunlight (near cars exposed to sunlight, high temperature equipment) as this may cause equipment damage and fire!
  • ► Please do not use this product to pry into other people's privacy!
  • ► Please do not disassemble the product, once found will not be warranted!

CAUTION: PLEASE READ BEFORE USE

  • ► Avoid humid and watery environments.
  • ► Avoid direct sunlight on the lenses.
  • ► Avoid drops, bumps and punctures.
  • ► Fully charge the battery before first use.
  • ► When you notice that the lens (objective or eyepiece) is dirty, blow off the sand and dust, and then gently wipe it with a lens cloth.

2. Specifications

Infrared & Optical Specifications
FeatureGRL325GRL335
Detector TypeVanadium Oxide Uncooled Focal Plane Array
Resolution384*288
Die Size12µm
Frame Rate<55Hz
NETD, mK<25mK @ 25°C, F/1.0
Objective Lens25mm35mm
Eye Relief50mm
Optical Zoom3X4X
Digital Zoom1X, 2X, 3X, 4X
Field of View (FOV)8.3°x6.2°6.5°x4.5°
Diopter Adjustment-5 to +5 Diopters
Focus Range3m to Infinity
Detection Range1500m1800m
Display & Function Specifications
FeatureDetails
Display TypeOLED
Dimensions0.39 Inches
Resolution1024*768
Picture In Picture (PIP)Yes
Video & Audio RecordingYes
Photo CaptureYes
Reticles5 Types, 5 Colors
Pseudo Color ModesWhite Hot/Iron Red/Green Hot/Fusion/Ice Fire/Red Hot
Defective Pixel CorrectionYes, Auto Correction
RAV & Wi-FiYes
Hot TrackYes
FFCYes
Scene ModeYes, Adaptive Mode
Classic One Shot ZeroYes
Thermal One-Shot ZeroYes
Shot Activated RecordingYes
Physical Specifications
FeatureGRL325GRL335
Net Weight (No Battery)538 g / 1.19 lbs553 g / 1.22 lbs
Dimensions160*85*80 mm / 6.30 × 3.35 × 3.15 inches
Max. Recoil1000 g / 0.4 ms
IP LevelIP65
Operating Temperature-20°C to 50°C / -4°F to 122°F
Storage Temperature-10°C to 65°C / 14°F to 149°F
SD Card64GB
MaterialsAluminum-Magnesium Alloy
Warranty5 Years
Power & Compatibility Specifications
FeatureDetails
Battery Type18650 Lithium Battery
Battery Capacities3.7V, 2600 mAh
Operating Time6-8 Hours
Charging Specifications5V/2A
Compatible MountsPicatinny Mount
GRL325 25MM Thermal Imaging Scope with detailed specifications
Figure 3: GRL325 model highlighting key specifications such as 384x288 IR pixels, 3X-12X zoom, 25mm focal length, 50Hz frame rate, WiFi, photo/video recording, >6 hours battery, waterproof, and crosshair.

3. Product Overview

3.1 Components

Diagram of the thermal scope with numbered parts and accessories
Figure 4: Overview of the thermal scope and its included accessories. (Refer to the original manual for detailed component labels)

Main Unit & Accessories:

  • Thermal Scope
  • Canvas Bag
  • Battery Charger
  • Battery (x2)
  • USB Type-C Cable
  • Lens Cloth
  • Screw (x12)
  • Hex Key
  • 64G SD Card
  • Picatinny Rail

Numbered Parts (Refer to Figure 4):

  1. Objective
  2. Objective Focusing Wheel
  3. UP Button
  4. DOWN Button
  5. M Button
  6. SWITCH Button
  7. Diopter Adjustment
  8. Eyepiece Cover
  9. Battery Menu Button Compartment
  10. SD Card
  11. Type-C Interface
  12. Indicator Light
  13. Gun Sight Base

3.2 Symbols on the Product

  • Battery Open & Lock: Rotate to open (negative outward) or lock the battery compartment.
  • Unlocked Clamping Device: Press to unlock, then pull.
  • SD Card: Slot for inserting/removing the SD card.
  • USB: Port for connecting/disconnecting the USB cable.

3.3 Symbols on the Display

  • EXIT: Exit current menu, return to previous level.
  • Reticle: Set reticle before shooting.
  • User Data: Select shooting profiles.
  • Reticle Color: Select reticle color.
  • Reset: Reset settings.
  • Reticle Style: Select reticle style.
  • Adjust: Freeze image and perform one-shot zero.
  • Setting: Access settings for shooting or searching.
  • Image Effect Adjustment: Adjust image effects.
  • Hotspot Tracking: Turn "Hotspot Tracking" on/off.
  • Loop Recording: Select different loop recording times.
  • Date Stamp: Turn "Date Stamp" on/off.
  • WIFI: Turn "Wi-Fi" on/off.
  • Gyroscope Calibration: Turn on "Gyroscope Calibration" to restore accuracy.
  • Impact Record: Turn "Impact Record" on/off.
  • Magnification: Select different optical zoom levels.
  • Pseudo Color: Select different palettes.
  • Photograph Mode: Select "record" or "photo".
  • Playback: Playback recorded videos and photos.
  • PIP: Turn "PIP" (Picture-in-Picture) on/off.
  • System: Change system settings.
  • LCD Brightness: Select different LCD Brightness levels.
  • Unit Switch: Choose unit "MOA" or "MRAD".
  • Date/Time: Set system date and time.
  • Auto Power Off: Set "Auto Power Off" time.
  • Language: Select different language.
  • Format: Format data.
  • Default Setting: Restore default settings.
  • Version: View product version.

4. Installation

4.1 Replacement of Eyecup

  1. To remove the old eyecup, gently pull outward and the eyecup will detach from the eyepiece.
  2. Install the new eyecup by stretching it over the eyepiece to ensure a snug fit without gaps.
Diagram showing how to remove and install the eyecup on the thermal scope
Figure 5: Eyecup replacement procedure. (Generic device image used for illustration)

4.2 Installing the Thermal Scope on a Rail

  1. Screw the accessory Picatinny rail to the gun, with the serrated grooves of the Picatinny rail facing forward (towards the muzzle).
  2. Follow the steps shown in the illustration to loosen the retaining clips and loosen the leather rail snaps.
  3. Slide the device forward from the rear of the rail (towards the buttstock) to avoid blocking other accessories and adjust it to the desired position.
  4. Lock the device in place and depress the lever as shown to ensure that the device does not wobble.
Diagram showing how to mount the thermal scope onto a Picatinny rail
Figure 6: Mounting the thermal scope on a Picatinny rail, showing locked and unlocked clamping devices. (Generic device image used for illustration)

4.3 Installing the Application

To download the companion application:

  • Scan the QR code on the product packaging box.
  • Alternatively, search the website https://www.videolan.org to download the application.
QR code for application download
Figure 7: QR code for downloading the GOYOJO application. (Generic QR code image used for illustration)

5. Operation

5.1 To Start The Product

  1. When the product is turned off, press and hold the power button for 3 seconds to turn on the product.
  2. The start-up page will appear.
  3. The main screen will then be displayed.
Power on/off interface and boot interface of the thermal scope
Figure 8: Power on/off and boot interfaces. (Generic device image used for illustration)

5.2 Connect the Application

  1. On the GRL series product, enter the UI menu, navigate to Setting > Wi-Fi, and turn Wi-Fi on.
  2. The On-Screen Display (OSD) will show messages including the SSID (Wi-Fi Name), PWA2 (password), and an RTSP streaming address (e.g., rtsp://192.168.1.254/ch0/stream0).
  3. Use your phone to find the WLAN and select the GRL series Wi-Fi network to connect.
  4. Open a compatible VLC Application (or similar streaming app) on your phone. Navigate to Network > Open Network Stream and enter the RTSP address provided by the device (e.g., rtsp://192.168.1.254/ch0/stream0).
  5. You can now play video in real-time on your connected device.
Screenshots showing Wi-Fi connection steps and VLC application setup
Figure 9: Steps for connecting the thermal scope to a mobile application via Wi-Fi. (Generic device image used for illustration)

5.3 Main Screen Overview

Main screen display of the thermal scope with numbered indicators
Figure 10: Main screen display with key information indicators. (Generic device image used for illustration)
  1. Horizontal value
  2. Vertical value
  3. Color: White hot/Iron red/Green hot/Fusion/Ice fire/Red hot
  4. A: User data, users can adjust the saved data according to their own habits, and can save five groups of user data (A-E)
  5. Target calibration distance, can be adjusted according to the target
  6. Adjust the horizontal position of the reticle
  7. Adjust the vertical position of the reticle
  8. 3X, current target magnification, you can adjust the magnification by pressing the up and down buttons

5.4 Enlargement and Reduction Display Magnification

  • Enlargement: From the main screen, press the "Up" button to zoom magnification (e.g., 3X to 6X). Repeatedly press "Up" to cycle through magnification levels (e.g., 3X/6X/9X/12X/3X...).
  • Reduction: From the main screen, press the "Down" button to reduce magnification (e.g., 6X to 3X). Repeatedly press "Down" to cycle through magnification levels (e.g., 12X/9X/6X/3X/12X...).

5.5 Palette Switching

  • From the main screen, press the "M" (Menu) button to switch palettes.
  • Repeatedly press the "M" button to cycle through available palettes: white hot, iron red, green hot, fusion, ice fire, red hot.
Six color palettes for thermal imaging: Red Hot, White Hot, Iron Red, Green Hot, Fusion, Ice Fire.
Figure 11: Available color palettes for thermal imaging, offering various visual representations of heat signatures.

5.6 Record or Photo

  1. From the main screen, press the "Power" button. A pop-up window will appear showing "Record" and "Photo" options.
  2. Press "Up" or "Down" to select "Record" or "Photo" options, then press the "Power" button to confirm.
  3. If "Record" is confirmed, recording will begin. Press the "Power" button again to stop recording. The information will be saved to the SD card.
  4. If "Photo" is confirmed, a picture will be taken. The information will be saved to the SD card.
Thermal scope with 6-8 hours battery life and 64GB storage
Figure 12: The thermal scope features 6-8 hours of battery life and includes 64GB of internal storage for recordings.

5.7 Classic & Thermal Zero One Shot

This feature allows for quick and accurate zeroing of the scope.

  1. Install the scope on the gun and fire the first shot.
  2. Enter the menu and select "Reticle".
  3. Enter the submenu of the "Reticle" option and select User data/Reticle Style/Reticle Color/Adjust/Reset/Exit.
  4. Select the "Adjust" option to enter the sub-menu.
  5. In the "Adjust" submenu, adjust the crosshair X, Y coordinate values and Dist value to coincide with the impact point of the first bullet, setting the current calibration distance.
  6. Perform a second shot to verify if the aiming point coincides with the impact point. If it does, calibration is complete. If not, repeat the adjustment steps.

Note: If calibration is not completed after adjusting to the maximum calibration value of the software, adjust the front and rear position of the scope connected to the gun or adjust the base to assist in completing the calibration.

Easy Zero Adjustment diagram showing a deer with a reticle overlay
Figure 13: Easy Zero Adjustment process, allowing quick and accurate reticle alignment.

5.8 Picture-in-Picture (PIP) Mode

The PIP mode allows you to zoom in on your target while still maintaining a full view of your surroundings. This helps keep you locked on your target without losing situational awareness.

PIP mode showing wolves with a zoomed-in overlay
Figure 14: Picture-in-Picture (PIP) mode in action, providing a magnified view of the target within the main thermal image.

5.9 To Power Off The Product

  1. When the product is turned on, press and hold the power button for 3 seconds to turn off the product.
  2. The shutdown page will appear (accompanied by a progress bar at the bottom).
  3. The device will power off.

6. Maintenance

6.1 Cleaning the Display, Objective Filter Cover, and Objective Lens

  • Blow away any debris or dust as much as possible, then gently wipe the surface with a lens cloth.
  • For grease stains or dried water spots, use a lens cloth or cotton swab with a small amount of denatured alcohol to gently clean the area.

6.2 Storage When Not in Use For a Long Time

  • Store the product in a canvas bag.
  • Keep the canvas bag in a dry, low-light, room-temperature environment (between -10°C to 65°C / 14°F to 149°F).
  • When the product is not in use, promptly close the objective lens cover.

7. Troubleshooting

If you encounter a problem with the product, please check the list below. If the issue persists, contact customer support.

Warning: Do not disassemble the product as this will void the warranty.

MalfunctionCauseAction
The image is too darkThe screen brightness is set too lowAdjust the brightness
Filter cap on objective lens not openOpen the filter cap
Image flickerBright light source being observedStop observing bright light sources
The power is too lowCharge the battery
Poor quality imagesDirt on the objective lens or eyepieceClean the objective lens & eyepiece
Unadjusted diopterAdjust the diopter
Focus not adjustedAdjust the focus
Product won't turn onInsufficient powerCharge the battery
Batteries installed backwardsReinstall the battery

8. User Tips

  • The device is noted for being quite light, making it convenient for field use.
  • Mounting options are generally considered excellent for its price point.
  • Long-range detection is very good, providing clear images at significant distances.
  • Controls are intuitive, making the device easy to operate even for new users.
  • The battery life is good, even in sub-zero temperatures, and batteries can be easily swapped if needed.
  • While primarily a thermal device, it can be used during the day to detect heat signatures, though it does not offer traditional night vision.
  • The device has been reported to handle recoil well from carbines (e.g., 7.62mm). The maximum recoil rating is 1000 g / 0.4 ms.

9. Regulations and Certifications

9.1 CE Certification

This product bears the CE Mark and is certified for legal sale in the European Economic Area (EEA).

Declaration of Conformity

GRL series products comply with the essential requirements of the following European Directives and Standards:

  • EN55014-1:2021+A11:2020
  • EN61000-3-3:2013+A1:2019
  • EN61000-3-2:2019+A1:2021
  • EN55014-2:2021

9.2 FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

9.3 RoHS Compliance

GRL series products conform to Directive 2011/65/EU (RoHS 2) and its amendments, restricting the use of the following hazardous substances:

  • Lead (Pb)
  • Cadmium (Cd)
  • Polybrominated Biphenyls (PBB)
  • Mercury (Hg)
  • Hexavalent Chromium (Cr6+)
  • Polybrominated Diphenyl Ethers (PBDE)

Compliance Threshold: ≤ 0.1% (1000 ppm) by weight, except Cadmium (≤ 0.01% or 100 ppm).

10. Warranty and Support

10.1 Warranty

This product comes with a 5-year warranty. Please refer to the terms and conditions of purchase for full details.

10.2 Contact Information

For technical support or warranty inquiries, please contact GOYOJO customer service:

A PDF version of this user manual is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.