Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your new ludengchaoshi 48cm Ceiling Fan Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The 48cm Ceiling Fan Light features a thin, silent design with a remote control for unlimited dimming, 6-speed fan adjustment, and adjustable color temperature, making it suitable for bedrooms and living rooms.
Safety Rules
- To reduce the risk of electrical shock, ensure electricity is turned off at the circuit breaker or fuse box before starting.
- All wiring must be in accordance with National Electrical Code and local electrical codes. Electrical installation should be performed by a qualified, licensed electrician.
- WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device.
- WARNING: To reduce the risk of fire, electrical shock, or personal injury, mount to an outlet box marked "Acceptable for Fan Support of 45 kg (99.12 lb) or less" and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for light fixture support are not acceptable for fan support and may need to be replaced. Due to the complexity of this fan's installation, a licensed and qualified electrician is strongly recommended.
- The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 45 kg. Use only UL listed outlet boxes marked FOR FAN SUPPORT.
- The fan must be mounted with a minimum of 7 feet (2.3 meters) of clearance from the trailing edge of the blades to the floor.
- Avoid placing objects in the path of the blades.
- To avoid personal injury or damage to the fan and other objects, be careful when working around or cleaning the fan.
- Do not use water or detergents when cleaning the fan or fan blades. A dry cloth for dusting or a lightly dampened cloth will be suitable for most cleaning.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully into the outlet box. Wires should be separated with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
- Electrical diagrams are for reference only.
- The fan is suitable for indoor use only.
Package Contents
Unpack your fan and check the contents. You should have the following:
- 1x Hanger
- 1x Motor
- 1x Motor Housing
- 1x Blade
- 1x Blade Screw
- 1x Decorative Cover
- 1x Receiver
- 1x Remote Control
- Screws: 6x 1/4*15 screws, 4x Self-tapping screws, 4x Expansion screws
- 2x Balance Sticker
- 4x Gasket
Tools Required
- Phillips Screwdriver
- Flathead Screwdriver
- Pliers
- Adjustable Wrench
- Wire Cutters
- Electrical Tape
- Step Ladder
Setup and Installation
To avoid personal injury and damage, ensure the hanging location allows the blade a free space of 7.5 feet (2.3 meters) from the floor and 18 inches (45.72 centimeters) from any wall or obstruction.
Mounting Bracket Installation
For Concrete Ceiling:
- First mark the location for the ceiling fan.
- Drill two holes in the ceiling to help secure the ceiling bracket with two provided expansion screws.
- Secure the mounting bracket to the building structure with the two provided expansion screws.
- Tighten the screws.
For Wooden Ceiling:
- First mark the location for the ceiling fan.
- Secure the mounting bracket to the building structure with the four provided wood screws.
NOTE: The hanger after installation must be able to support a weight of 45 kg or more.
Receiver Installation
- Install the motor: Unscrew the four screws from the ceiling mounting bracket, connect the bracket, and fix it to the motor with the screws.
- Install the remote control receiver: Connect the motor wires and the receiver wires to the corresponding colors. (Refer to the remote control manual for specific wiring details).
- Install the cover: Place the cover on the motor, turn it clockwise, and secure it to the mounting bracket.
Electrical Connections
Perform wiring connections from the house and motor to the remote receiver as shown in the diagram. The remote receiver must match the same control code.
| Connection Point | Wire Color (House) | Wire Color (Receiver) | Wire Color (Motor) |
|---|---|---|---|
| Live Wire (Light) | Blue | Blue | |
| Neutral Wire (Light) | White | White | |
| Motor Wire | Pink | Pink | |
| Motor Wire | Grey | Grey | |
| Motor Wire | Red | Red | |
| Antenna Cable | Antenna Cable |
Installation without Lamp
- Install the blade: Fix the fan blade to the motor with screws and fix the three blades in turn.
- Install the decorative cover: Tighten the decorative cover over the motor.
- Complete the installation.
Installation with Lamp
- After locking the blade, install the lamp kit (Do not install the blade in the opposite direction).
- After locking the lamp kit, insert the ends of the LED cable.
- Finally, turn the glass clockwise to tighten it and check if it is loose. Complete the installation.
Operating Instructions
Your ceiling fan light is controlled by the included remote control. Ensure the remote has working batteries installed.
- Power On/Off: Use the dedicated power buttons for the fan and light.
- Fan Speeds: The fan offers 6 adjustable speeds. Use the speed buttons (1-6) to select your desired airflow.
- Timing Setting: Set a timer for the fan to automatically turn off after 2 or 4 hours.
- Reverse Function (Summer/Winter Mode):
- Summer Mode: Air circulation downward for a cooling effect.
- Winter Mode: Air circulation upward (reverse) to help distribute warm air.
Visual representation of summer (downward airflow) and winter (upward airflow) modes. - Smooth Dimming (10%-100%): Adjust the brightness of the light from 10% to 100% using the dimming buttons.
- Color Temperature Adjustment: Choose between three color temperatures:
- 3000K (Warm Light)
- 4000K (Natural Light)
- 6000K (White Light)
Illustrates the three adjustable color temperatures: Warm, Natural, and White light. - Night Light: Activate a low-intensity night light mode.
- Memory Function: The fan light remembers the last used light color and intensity settings when turned off and on from the wall switch.
Video Demonstration
Watch this video for a visual guide on unboxing, assembly, and demonstrating the light and fan functions.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your ceiling fan light.
- Cleaning: Do not use water or detergents when cleaning the fan or fan blades. A dry cloth for dusting or a lightly dampened cloth will be suitable for most cleaning.
- Blade Balance: If the fan wobbles, check the blade balance. Use the provided balance stickers if necessary.
- Tighten Screws: Periodically check and tighten all screws on the motor housing and mounting bracket to ensure secure operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start |
|
|
| Fan sounds noisy |
|
|
Specifications
| Feature | Specification |
|---|---|
| Brand Name | ludengchaoshi |
| Item Type | Ceiling Fans |
| Installation Method | Assembly |
| Diameter | 48cm (18.9 inches) |
| Height | 12cm (4.72 inches) |
| Wattage | 30W / 48W (RC) |
| Voltage | 110-240V AC |
| Power Source | AC |
| Luminous Flux | 249-2000 |
| Color Temperature | 3000K (Warm Light), 4000K (Natural Light), 6000K (White Light) |
| Fan Speeds | 6 Speeds |
| Control Method | Remote Control |
| Suitable Area | 10-15m² |
| Material | ABS + Hardware |
| Is Bulbs Included | Yes |
| Is Batteries Included | No |
| Certification | CE, ROHS |
| Origin | Mainland China |
User Tips
- Remote Control Beep: The remote control emits a 'pip' sound with each button press. This is a normal function and cannot be turned off.
- Room Size: The fan light provides good brightness for small to medium-sized rooms (e.g., bedrooms). For larger living rooms, the brightness might be less impactful.
- Installation: Many users find the installation process straightforward. However, if you are unsure about electrical wiring, it is always recommended to consult a qualified electrician.
- Memory Function: The fan light is equipped with a memory function that retains the last light color and intensity settings when turned off and on via the wall switch.
- Wall Installation: This product is designed for ceiling installation only and cannot be installed on a wall.
Warranty and Support
For warranty information, technical support, or replacement parts, please contact the seller or refer to the official product page. Keep your purchase receipt as proof of purchase.
A user manual in PDF format is available for download. You can find it by searching for 'Item guides & documents' on the product page or by contacting customer support.