1. Important Safety Precautions
- Always use the original car charger provided with the dash cam. Using mobile phone chargers or standard USB cables is not supported and may cause malfunctions, including the rear/cabin camera not activating or the dash cam failing to power on.
- The built-in battery is primarily for maintaining date, time, and settings. For continuous operation and recording, the dash cam must remain connected to the car charger. If power is interrupted, the unit will shut down.
- Ensure the dash cam is installed in a location that does not obstruct the driver's view or interfere with vehicle operation.
- Do not expose the dash cam to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
2. Product Overview
The GMAIPOP Dual Lens Car DVR is designed to record both the road ahead and the vehicle's interior simultaneously, providing comprehensive video evidence and surveillance. It features a 3.16-inch IPS screen, 170° wide-angle view, G-Sensor, loop recording, and night vision capabilities.

Image: GMAIPOP Dual Lens Car DVR showing front and cabin cameras, with key features highlighted.
2.1 Package Contents
- Dual Lens Car DVR Unit
- Car Charger (Cigarette Lighter Adapter)
- Mounting Bracket
- User Manual (PDF available online)

Image: The dash cam unit, car charger, mounting bracket, and user manual.
2.2 Dash Cam Components

Image: Diagram of the dash cam with numbered components.
- Power/OK Button: Turns the camera ON/OFF, starts/stops recording, or confirms selections.
- Down Button (>): Navigates down in menus, switches display windows, or scrolls to next video files.
- Up Button (<): Navigates up in menus, or mutes audio recording.
- Menu Button (M): Enters playback mode, enters/exits menu, or locks video files.
- Reset Hole: Used to reset the dash cam.
- AV-IN Port: Connects to the cabin camera.
- TF Card Slot: Insert Micro SD/TF card here.
- Mini USB Power Interface: Connects to the car charger.
3. Setup and Installation
3.1 Unboxing and Initial Inspection
Carefully remove all components from the packaging. Inspect for any signs of damage. Keep the packaging for future reference or returns.
Video: Unboxing and initial assembly of the dash cam components.
3.2 Inserting the Memory Card
- The dash cam supports Micro SD/TF cards up to 64GB. A Class 10 or higher speed rating is recommended for optimal recording performance.
- With the dash cam powered off, gently insert the memory card into the TF Card Slot until it clicks into place.
- To remove, push the card in slightly until it springs out.
3.3 Mounting the Dash Cam
- Attach the mounting bracket to the dash cam unit.
- Clean the desired area on your windshield (typically behind the rearview mirror) to ensure a strong adhesive bond or suction.
- Securely attach the dash cam with its mount to the windshield. Ensure the front lens has a clear view of the road and the cabin lens has a clear view of the interior.
- Adjust the angle of the camera for optimal recording coverage.
3.4 Power Connection
- Connect the provided car charger to the Mini USB Power Interface on the dash cam.
- Plug the other end of the car charger into your vehicle's cigarette lighter socket.
- Route the power cable neatly to avoid obstructing your view or vehicle controls.
4. Operating Instructions
4.1 Powering On/Off
- To Power On: Long-press the Power/OK button for 2-3 seconds. The dash cam will typically power on automatically when the vehicle's ignition is turned on.
- To Power Off: Long-press the Power/OK button for 2-3 seconds. The dash cam will typically power off automatically when the vehicle's ignition is turned off.
4.2 Recording Video
- Once powered on and a memory card is inserted, the dash cam will usually start recording automatically.
- Start/Stop Recording: Short-press the Power/OK button once to manually start or stop video recording.
- Loop Recording: The dash cam features loop-cycle recording. When the memory card is full, it will automatically overwrite the oldest unlocked files.
- Lock Video Files: During recording, short-press the Menu (M) button to lock the current video file. Locked files will not be overwritten by loop recording.
- Audio Recording: Short-press the Up (<) button in video mode to mute or unmute audio recording.
4.3 Display Modes
The dash cam supports multiple screen display modes for viewing footage from the front and cabin cameras.

Image: Visual representation of different screen display modes (Front, Front+Rear, Back).
- Switch Display: Short-press the Down (>) button to cycle through different display windows (e.g., Front camera only, Front and Cabin cameras split view, Cabin camera only).
4.4 Playback Videos
4.4.1 Playback on the Dash Cam
- Enter Playback Mode: When the dash cam is NOT recording, short-press the Menu (M) button to enter playback mode.
- Navigate Files: Use the Up (<) and Down (>) buttons to scroll through recorded video files.
- Play/Pause: Short-press the Power/OK button to play or pause the selected video.
- Delete/Protect Files: Long-press the Menu (M) button to delete or protect the current file.
- Exit Playback Mode: Short-press the Menu (M) button again to exit playback mode.
4.4.2 Playback on a PC
- Power off the dash cam and carefully remove the Micro SD card.
- Insert the Micro SD card into a card reader connected to your computer.
- Access the video files on the card and play them using a compatible media player.
4.5 Menu Settings
- Enter Menu: When the dash cam is NOT recording, long-press the Menu (M) button to enter the settings menu.
- Navigate Menu: Use the Up (<) and Down (>) buttons to scroll through menu options.
- Select/Confirm: Short-press the Power/OK button to select an option or confirm a setting.
- Exit Menu: Long-press the Menu (M) button again to exit the menu.
5. Features Explained
5.1 G-Sensor (Gravity Sensor)

Image: Illustration of G-Sensor activation during a collision, protecting video footage.
The G-Sensor detects sudden impacts or rapid acceleration/deceleration. When triggered, it automatically locks the current video segment to prevent it from being overwritten by loop recording, ensuring critical event footage is preserved.
5.2 Night Vision
Equipped with NightShot Function and WDR (Wide Dynamic Range) technology, the dash cam enhances clarity in low light conditions, providing improved visibility for night recordings.

Image: Features contributing to Super Night Vision, including IMX 335 Sensor, 6-Glass Lens, WDR Tech, and f1.6 Aperture.
5.3 Motion Detection
The dash cam includes a motion detection feature. When enabled, it can start recording automatically if motion is detected in front of the camera while the vehicle is parked. Note: For this feature to function, the dash cam typically needs a continuous power supply (e.g., hardwired kit, not included).
6. Maintenance
- SD Card Formatting: It is recommended to format the Micro SD card regularly (e.g., once a month) to ensure optimal performance and prevent data corruption. This can usually be done through the dash cam's settings menu.
- Cleaning: Use a soft, dry cloth to clean the camera lenses and screen. Do not use abrasive cleaners or solvents.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to improve performance or add new features.
7. Troubleshooting
- Dash Cam Not Powering On / Rear Camera Not Activating:
Ensure you are using the original car charger provided. Mobile phone chargers or standard USB cables are not compatible and will not provide sufficient power. - "SD Card Error" Message:
Try resetting the dash cam using the Reset Hole. If the issue persists, reinsert the SD card. If still unresolved, format the SD card via the dash cam's menu settings. Ensure the SD card is a Class 10 or higher and not larger than 64GB. - Poor Image Quality:
Ensure the lenses are clean and free from smudges or dirt. Check that the protective film has been removed from the lenses. Adjust the camera angle to avoid glare. - Dash Cam Falls Off Mount:
Ensure the mounting surface (windshield) is clean and dry before attaching the mount. Press firmly to secure. If using a suction cup, ensure it's properly locked. - Motion Detection Not Working for Parking:
The motion detection feature typically requires continuous power, which may necessitate a hardwiring kit (not included) to function when the vehicle is off. The built-in battery has limited capacity and is not designed for extended parking surveillance.
8. Specifications
| Feature | Specification |
|---|---|
| Camera Resolution | 1920x1080 (FHD) |
| Pixels | 200 Mega |
| View Angle | 170° |
| Aperture | F2.0 |
| Display | 3.16 inch IPS, 16:9 Screen Ratio, Touch Screen, Built-in Screen |
| Video Code | H.264 |
| Video Format | AVI |
| Max External Memory | 64G (Class 10 required) |
| Number Of Lenses | 2 (Front and Cabin) |
| Special Features | G-Sensor, Display Rotate, SD/MMC card, Real Time Surveillance, Loop-Cycle Recording, Audio Recorded, NightShot Function |
| Battery | Built-in, 150mAh (for settings only) |
| Power Source | Corded Electric (Car Charger) |
| Interface | AV-In, Micro SD/TF |
| OSD Language | Arabic, Chinese (Simplified), Chinese (Traditional), Dutch, English, French, German, Japanese, Polish, Portuguese, Russian, Spanish, Turkish |
| Assembly Mode | Portable Recorder |
| Chipset Manufacturer | MSC |
| Frames Per Second | 30 |
| Cable Length | 3 meters |
| Dimensions (L x W x H) | 30cm x 14cm x 8cm |
| Weight | 0.296 kg |
9. User Tips
- For optimal performance, always use the provided car charger. The dash cam is designed to be continuously powered by the car's electrical system.
- Ensure your Micro SD card is a Class 10 or higher and formatted regularly to prevent recording issues.
- The dash cam is designed to start recording automatically when your car's ignition is turned on, so you don't need to manually press buttons each time.
- Experiment with the different screen display modes to find the view that best suits your needs (front, cabin, or split-screen).
- If you experience issues with the camera falling off its mount, ensure the mounting surface is thoroughly cleaned and dry before reattaching.
10. Frequently Asked Questions (FAQ)
- Q: How do I activate both cameras?
A: Both cameras (front and cabin) are typically active simultaneously when the dash cam is powered on and recording. You can switch between different display views using the Down (>) button. Ensure you are using the original car charger for proper functionality of both cameras. - Q: Does the camera have an internal battery for when the vehicle is not running?
A: The internal battery has a very limited runtime, typically lasting only a few minutes. It is primarily for maintaining date, time, and settings. For continuous recording, especially for parking surveillance, the camera needs to stay connected to the vehicle's power source via the car charger. - Q: Does it start recording automatically when the car is turned on?
A: Yes, many users confirm that the dash cam starts recording automatically when the car's ignition is turned on, without needing manual intervention. - Q: What does the side/interior camera do?
A: The interior camera records the cabin view of your vehicle. It can be adjusted for desired angles and is useful for recording passengers or events inside the car. It works best when powered via the car’s cigarette lighter socket. - Q: Does it record audio?
A: Yes, the dash cam is capable of recording audio. You can mute or unmute audio recording by short-pressing the Up (<) button in video mode. - Q: What kind of memory card is needed?
A: A Micro SD/TF card with a Class 10 speed rating or higher is required. The dash cam supports cards up to 64GB. - Q: Is the charger Micro USB?
A: Yes, the power interface on the dash cam is a Mini USB port, which connects to the provided car charger. - Q: What languages does the menu support?
A: The OSD (On-Screen Display) menu supports multiple languages including Arabic, Chinese (Simplified), Chinese (Traditional), Dutch, English, French, German, Japanese, Polish, Portuguese, Russian, Spanish, and Turkish. - Q: Does it have motion detection for parking surveillance?
A: While the dash cam has a motion detection feature, its effectiveness for extended parking surveillance when the car is off is limited by the small internal battery. For reliable parking monitoring, a continuous power supply (e.g., a hardwiring kit) is generally needed.
11. Warranty and Support
This product comes with a 1-year warranty.
If you encounter any problems or have questions not covered in this manual, please contact our support team for assistance. You can also refer to the full user manual in PDF format for more detailed information: