Dragonhawk Fold Pro Snake Year Limited Edition Wireless Tattoo Machine

1. Product Overview

The Dragonhawk Fold Pro is a professional-grade wireless tattoo machine, featuring an adjustable stroke, a powerful MCORE-C3 motor, and a long-lasting 3000mAh battery. This limited 'Year of Snake' edition combines advanced technology with a unique design for precision tattooing.

Figure 1: Dragonhawk Fold Pro Key Features

2. Setup and Assembly

2.1 Unboxing

1. Carefully open the product packaging.
2. Verify all components are present: Tattoo machine body, power supply module, additional grip (if included), Type-C charging cable, RCA module (if included), and user manual.

2.2 Charging the Battery

Before first use, fully charge the machine's battery.

1. Connect the Type-C charging cable to the charging port on the power supply module.
2. Connect the other end of the cable to a suitable USB power adapter (not included).
3. The screen will display a charging indicator. A full charge takes approximately 2 hours.
4. The battery provides up to 10 hours of continuous operation on a full charge.

Figure 2: Battery Charging and Capacity

2.3 Attaching the Grip

1. Align the desired grip (standard or larger) with the threaded base of the machine body.
2. Twist the grip clockwise until it is securely fastened.

2.4 Inserting Cartridge Needle

1. Ensure the machine is powered off or paused.
2. Insert the cartridge needle into the circular opening at the tip of the machine.
3. Twist the cartridge clockwise gently until it is securely tightened.

2.5 Adjusting Needle Length (Depth)

Rotate the grip (C & E) clockwise or counter-clockwise to adjust the needle protrusion length to your desired depth.

2.6 Adjusting Stroke Length

The Fold Pro features an adjustable stroke mechanism.

1. Locate the stroke adjustment module (B) on the machine body.
2. Twist the rotation module to select your desired stroke length from 2.4mm, 2.7mm, 3.0mm, 3.3mm, 3.6mm, 3.9mm, or 4.2mm.

Figure 3: Stroke Adjustment Settings

2.7 RCA Module (Optional Wired Connection)

The power supply module (A) can be replaced with an RCA module for a wired connection to an external power supply. To switch:

1. Unscrew the wireless power supply module from the machine body.
2. Screw the RCA module onto the machine body.
3. Connect an RCA cable from the module to your external power supply.

3. Operating Instructions

3.1 Power On/Off

• To Power On: Long press the power button (A-3) until the screen illuminates.
• To Power Off: Long press the power button (A-3) until the screen turns off.

3.2 Screen Display (A-1)

• Battery Level: Displays the current battery charge.
• Voltage Display: Shows the current operating voltage.
• Timer Display: Tracks the duration of operation. The timer starts when the machine is running. Pressing the power button to shut down resets the timer to zero.
• Memory Settings (M1-M5): Allows you to save and recall preferred voltage settings. Click the icon to cycle through memory settings.
• Dot/Voltage Modes (DCV/D0-D9): Click the icon to switch between dot work mode and standard voltage mode.

3.3 Adjusting Voltage

• Use the voltage adjustment buttons (A-2 & A-4) to increase or decrease the voltage.
• Alternatively, swipe up or down on the screen to adjust the voltage.

3.4 Pause and Start

• Click the power button (A-3) or the play/pause icon on the screen to switch the output on or off.

3.5 Dot Work Mode

• In dot work mode, click the add or subtract buttons to adjust the dot setting.

3.6 Instant Start Up Mode

• When the machine is off, double-click the power button (A-3) to turn on and enable instant start up mode, which provides a brief power surge for starting larger needle configurations.

4. Maintenance

4.1 Cleaning

• Always disconnect the machine from any power source before cleaning.
• Wipe the machine body and grip with a soft cloth dampened with a medical-grade disinfectant solution after each use.
• Do not immerse the machine in liquid or use abrasive cleaners.
• Ensure no liquids enter the internal components of the machine.

4.2 Battery Care

• Avoid completely discharging the battery.
• Do not overcharge the battery; disconnect once fully charged.
• Store the machine in a cool, dry place when not in use.

4.3 Needle Disposal

• Always dispose of used tattoo needles in a designated sharps container according to local regulations.

5. Troubleshooting

5.1 Machine Not Turning On

• Check Battery: Ensure the battery is charged. Connect to the charger and see if the charging indicator appears.
• Power Button: Ensure the power button is pressed firmly and held for a few seconds to power on.

5.2 Inconsistent Power or Stalling

• Needle Cartridge: Ensure the needle cartridge is properly inserted and not defective.
• Voltage Setting: Adjust the voltage to a higher setting if the machine feels underpowered for the needle configuration.
• Battery Level: Low battery can cause performance issues. Recharge the battery.

5.3 Battery Not Charging or Overheating

• Cable/Adapter: Try a different Type-C cable and USB power adapter.
• Charging Port: Inspect the charging port for any debris or damage.
• Overheating: If the battery overheats significantly during charging or use, discontinue use and contact support.

5.4 Screen Issues / Accidental Mode Changes

• Touch Sensitivity: The touchscreen is sensitive. Be mindful of accidental touches that might switch modes (e.g., to dot work mode). Familiarize yourself with the button functions to quickly revert settings.

6. Specifications

Figure 4: Dragonhawk Fold Pro Technical Parameters

7. User Tips

• Quiet and Smooth Operation: Users frequently praise the machine for its near-silent operation and smooth performance, even at higher voltages, making it ideal for fineline work.
• Versatile Stroke Adjustment: The adjustable stroke length is a highly valued feature, allowing artists to adapt the machine for various tattooing styles and techniques.
• Long Battery Life: The 3000mAh battery provides extended working sessions (up to 10 hours) after a quick 2-hour charge, minimizing interruptions.
• Touchscreen Awareness: Be mindful of the sensitive touchscreen to avoid accidental mode changes during use. Familiarize yourself with the button layout to quickly adjust settings if needed.
• Stable Performance: The MCORE-C3 motor maintains constant RPMs, ensuring stable performance without slowing down, even with larger needle groupings or when packing colors.

8. Warranty and Support

For any warranty claims, technical support, or inquiries regarding your Dragonhawk Fold Pro tattoo machine, please contact the seller directly through your purchase platform. Keep your proof of purchase for any warranty-related services.

A detailed user manual in PDF format may also be available for download from the seller or manufacturer's website. Please refer to the provided PDF manual for additional information: View User Manual (PDF)