Introduction
Thank you for choosing the PROGAGA DL-SF08 Adjustable Universal Speaker Floor Stand. This product is designed to provide stable and adjustable support for a wide range of speakers, including models like the Samsung Q900A and JBL bar. Its height-adjustable feature allows for optimal sound positioning in various environments, from computer setups to home theaters and living rooms.
Safety Information
- Ensure all components are securely fastened before placing speakers on the stand.
- Place the speaker stand on a flat, stable, and level surface to prevent tipping.
- Do not exceed the maximum recommended weight capacity for the speaker tray.
- Keep children and pets away from the speaker stands, especially during assembly and height adjustment.
- Avoid placing the stand in high-traffic areas where it could be easily knocked over.
- Do not hang or climb on the speaker stand.
Package Contents
Please verify that all parts are present before beginning assembly. The package includes components for two speaker stands.
Main Components (per stand):
- Base: 1
- Bracket (Speaker Tray): 1
- Round tube (Upper straight round rod + Lower straight circular tube): 1 set
Accessories (for two stands):
- Decorative ring: 2
- Screw 6mm (already inside the pole): 2
- Screw 8mm (already inside the pole): 2
- Black round pad: 8
- Wrench: 2
- Lock (for height adjustment): 2
Setup Instructions
Follow these steps to assemble your speaker stands:
- Assemble the Base: Attach the lower straight circular tube to the disk base using the 8mm screw (already inside the pole). Ensure the decorative ring is in place before tightening. If your model has a three-claw base, configure it according to the purchased model.
- Connect the Rods: Insert the upper straight round rod into the lower straight circular tube.
- Attach the Speaker Tray (Bracket): Secure the bracket to the top of the upper straight round rod using the 6mm screw (already inside the pole).
- Adjust Height: Loosen the height adjustment lock. Extend or retract the upper rod to your desired height (between 78cm and 145cm). Once the desired height is reached, tighten the height adjustment lock firmly to secure the rod in place.
- Apply Pads: Place the black round pads on the speaker tray to prevent scratches and provide stability for your speaker.
- Final Check: Ensure all screws are tightened and the stand is stable before placing any speaker on it.
Operating Instructions
Once assembled, using your speaker stands is straightforward:
- Speaker Placement: Carefully place your speaker onto the top tray. Ensure the speaker is centered and stable on the tray.
- Height Adjustment: If you need to change the height, first remove the speaker from the tray. Then, loosen the height adjustment lock, set the new height, and firmly re-tighten the lock. Always ensure the lock is fully secured before placing the speaker back on.
- Stability Check: Periodically check the stability of the stand and the tightness of all connections, especially after moving the stand or adjusting its height.
Maintenance
- Cleaning: Wipe the stand with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the finish.
- Inspection: Regularly inspect the stand for any signs of wear, damage, or loose components. Tighten any loose screws or connections as needed.
- Storage: If disassembling for storage, keep all parts and accessories together in a safe place.
Troubleshooting
- Problem: The speaker stand feels wobbly or unstable.
-
Solution:
- Ensure the stand is placed on a completely flat and level surface.
- Check that all screws, especially those connecting the base and the rods, are fully tightened.
- Verify that the height adjustment lock is securely fastened after setting the desired height.
- Problem: Difficulty adjusting the height of the stand.
-
Solution:
- Ensure the height adjustment lock is fully loosened before attempting to adjust.
- Check for any obstructions or debris within the telescopic rods.
- Apply gentle, even pressure when extending or retracting the rod.
Specifications
| Feature | Specification |
|---|---|
| Model Number | DL-SF08 |
| Brand Name | PROGAGA |
| Adjustable Height Range | 78cm - 145cm |
| Speaker Tray Dimensions | 215mm (Length) x 130mm (Width) x 30mm (Side Walls) |
| Package Weight | 5.63 kg |
| Package Dimensions | 78cm x 31cm x 6cm |
| Quantity per Lot | 2 Pieces |
User Tips
No specific user tips were available from customer reviews or Q&A for this product at this time. Always ensure the stand is stable and on a level surface for optimal performance and safety.
Warranty and Support
For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual is also available in PDF format for your convenience: