1. Introduction
This manual provides instructions for the installation, operation, maintenance, and troubleshooting of your new Malcayang LED License Plate Lights. These lights are designed as a direct replacement for specific Mercedes-Benz models, offering enhanced brightness and a modern aesthetic. Please read all instructions carefully before installation and use.
2. Safety & Warnings
Important Safety Information
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
Note: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.
3. Product Specifications
| Feature | Specification |
|---|---|
| Item Type | License Plate Lights |
| Brand Name | Malcayang |
| For Vehicle Brands/Model | Mercedes-Benz |
| Compatible Mercedes-Benz Models | ML350 (2002-2005) |
| Model Year 1 Compatibility | For Mercedes Benz GL Class X164 (2007-2012) |
| Model Year 2 Compatibility | For Mercedes Benz ML Class W164 (2005-2011) |
| Model Year 3 Compatibility | For Mercedes Benz R Class W251 (2006-2011) |
| OEM Part Numbers | 1638200066, A1638200066, 2518200166, A2518200166 |
| Voltage | 12 V |
| Lumens | 2400LM |
| Wattage | Number Plate Lamp For Mercedes Benz ML 280 320 420 GL 350 500 550 AMG |
| Item Weight | 0.1kg |
| Origin | Mainland China |
| Includes | One pair (right and left) |
Product Dimensions
The dimensions of each LED license plate light are approximately:
- Length: 71mm
- Height: 23mm
4. Installation Instructions
The Malcayang LED License Plate Lights are designed for easy, direct replacement of your original car parts.
- Locate the original license plate lights on your vehicle.
- Carefully remove the original car parts to access the internal screws/clips.
- Loosen the screws/clips to further remove the cover/cap of the original light assembly.
- Disconnect the wiring from the original signal light.
- Connect the wiring of the new Malcayang LED License Plate Light to the vehicle's harness.
- Insert the new LED License Plate Light into the housing.
- Secure the new light by tightening the screws/clips and replacing any covers/caps.
- Test the lights to ensure proper function.
5. Operating Instructions
Once installed, the LED license plate lights operate automatically with your vehicle's lighting system. They will illuminate when your vehicle's lights are turned on, providing bright and clear illumination for your license plate.
6. Maintenance
- Regularly check the lights for any signs of damage or loose connections.
- Clean the light covers periodically with a soft, damp cloth to ensure maximum light output.
- After car washes, it is advisable to inspect the lights for any water ingress and clean them if necessary to prevent issues.
7. Troubleshooting
Common Issues and Solutions:
- Lights not working / No lights are on:
- Check all electrical connections to ensure they are secure and properly seated.
- Verify that the vehicle's lighting system is functioning correctly (e.g., check fuses).
- Ensure the lights are correctly installed according to the instructions.
- Error message on car's control panel:
- While many users report no error codes, some vehicles may be sensitive to aftermarket LED lights. If an error occurs, ensure the product is compatible with your specific vehicle's electronics.
- Consult a professional automotive technician if the error persists.
- One light is dimmer than the other:
- Check the wiring connections for both lights to ensure consistent power delivery.
- Inspect both lights for any physical damage or defects.
- If the issue persists, contact customer support for assistance.
8. User Tips
- Water Care: While the lights are designed for outdoor use, some users recommend being careful with water, especially after car washes. If you notice any moisture inside the light, it may be beneficial to remove and clean it to prevent long-term issues.
- Compatibility Check: Always double-check the compatibility with your specific Mercedes-Benz model and year before installation to avoid potential error messages or fitment issues.
9. Compliance Information
Manufacturer Information:
Company Name: Guangzhou yangchi auto parts co.LTD
Address: CN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou, China
E-Mail: ouyan99@dingtalk.com
Telephone: 18102513142
EU Authorized Representative:
Company Name: CET PRODUCT SERVICE LTD
Address: Osterholzallee 144, 71636 Ludwigsburg Germany
E-Mail: info.cetservice@gmail.com
Telephone: +4971416432236
EC REP: eVatmaster Consulting GmbH, Bettinastr. 30, 60325 Frankfurt am Main, Germany (contact@evatmaster.com)
We simply act as EC representative for cross-border sellers, and are not manufacturers/importers/distributors for the product, nor involved in the manufacture/import/sale of the product. Therefore, we are not responsible for any after-sales services related to the product. In case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.
10. Warranty & Support
For warranty information and customer support, please refer to the seller's policies or contact the manufacturer directly using the contact information provided in the Compliance Information section. Keep your purchase receipt for any warranty claims.
A detailed user manual in PDF format is available for download from the product page or by contacting customer support.