XHDATA D-608WB Emergency Crank Weather Radio User Manual

1. Introduction

The XHDATA D-608WB is a versatile emergency crank weather radio designed for reliability in various situations. It features multiple radio bands, NOAA weather alerts, and diverse power options to ensure you stay informed and connected. This manual provides detailed instructions for its setup, operation, and maintenance.

Image: XHDATA D-608WB radio with NOAA alert and SOS alarm indication.

2. Safety Information

Please read and understand the following safety guidelines before using the device:

• Only use 18650 3.7V rechargeable lithium batteries of the same and equivalent specifications. Improper use can cause explosion.
• Do not attempt to charge non-rechargeable batteries.
• Do not place batteries in high-temperature environments, or expose them to moisture, explosion risks, or smoke.
• Do not disassemble, impact, or knock the lithium battery. If the battery is deformed or bulged, it must not be used.
• Always use a safe and qualified adapter for charging the device.
• To maintain the service life of the lithium battery, if the machine is not used for a long time, charge it at least once every three months.
• Avoid using the radio function when using your mobile phone for emergency charging, as the boost circuit operation may cause serious interference to the radio signal.

3. Product Overview

3.1 Key Features

Image: Key features of the radio.

• Radio Bands: FM, AM (MW), SW, WB (NOAA Weather Band)
• Emergency Features: NOAA Scan Alert, SOS Alarm, Flashlight, Reading Lamp, Hand Crank Generator, Solar Panel Charging
• Connectivity: Bluetooth 5.0, TF Card MP3 Player, USB-A output for phone charging, 3.5mm Headphone Jack
• Convenience: Auto Frequency Search (ATS), 500 Memory Stations, Alarm Clock, Digital Display

3.2 Components

Image: Front view of the XHDATA D-608WB radio.

• Front Panel: Speaker, Display Screen, Volume buttons (V-, V+), MEY/DEL button, VM/VF button, ATS button, ALERT button, BAND button, M button, Power button, MIC, TORCH button, SOS button, RESET hole.
• Top Panel: Extendable FM Antenna, Solar Panels.
• Side Panels: Hand Crank Generator Rocker Arm, Bass Vibration Plate Air Outlet, Lighting Luminous Panel, TF Card slot, DC 5V IN Type-C port, 3.5mm Headphone Jack, DC 5V OUT (USB-A) port.

Image: Top view of the radio showing the solar panel and extended antenna.

Image: Rear view of the radio with the battery compartment open, showing the 18650 battery and hand crank.

Image: Side view of the radio showing the DC OUT 5V, Headphone Jack, DC IN 5V, and TF card slot.

3.3 Display Indicators

The display provides various indicators for device status and settings:

• Power Display: Low battery, Full battery.
• Status Icons: Sleep shutdown, ALERT WB band standby, Alarm clock icon, Lock keyboard icon, Battery charging indicator, Mobile phone call alert symbol.
• Radio Information: Radio signal field strength, Volume level, SW short wave meter wave display, Alarm time display icon, Memory station number display icon, Radio signal strength (RSSI), Radio signal-to-noise ratio scale value (S/N), Temperature display (°C/°F).
• Mode Indicators: FM stereo, Bluetooth function symbol, TF card icon, TF plays single loop, DC5V output mobile phone emergency charging.
• Frequency Units: KHZ radio frequency unit, MHZ radio frequency unit.
• Band Display: FM/MW/SW/WB band display icon.

4. Setup

4.1 Power Supply and Battery Installation

The radio is powered by a 3.7V 18650 rechargeable lithium battery. Ensure correct polarity during installation.

• Battery Installation: Install the positive and negative terminals of the 3.7V (18650) lithium battery correctly into the battery compartment.
• USB Charging: Connect one end of the USB charging cable to a DC5V USB output adapter (1A recommended) and the other end to the DC 5V IN Type-C port on the radio. The display will show a flashing charging symbol. When fully charged, the charging symbol will stop flashing.
• Solar Panel Charging: For emergency charging, point the solar panel directly towards the sun.
• Hand Crank Charging: Pull out the hand crank generator rocker arm and rotate it to charge the machine in an emergency.

Image: Four ways of power supply: battery, hand crank, solar panel, and USB data cable.

4.2 Initial Power On/Off

• Power On: Short press the power button. The display will show "ON".
• Power Off: Short press the power button. The display will show "OFF".

4.3 Setting Frequency Coverage

Different regions have varying frequency coverage. Set this while the radio is OFF.

• FM Frequency Range: Long press the BAND button, then short press to cycle through FM receiving frequency ranges: 64-108MHz, 76-108MHz, 87-108MHz, and 87.5-108MHz.
• MW Frequency Coverage:
  • For 64-108MHz/76-108MHz/87-108MHz FM ranges, MW is set to 522-1620KHz (9K) for Asia, Europe, Africa, and Oceania. Temperature displays in Celsius (°C).
  • For 87.5-108MHz FM range, MW is set to 520-1710KHz (10K) for North and South America. Temperature displays in Fahrenheit (°F).

4.4 Setting the Clock

• While the radio is OFF, press and hold the M key. The clock display will flash.
• Turn the TUNING shuttle to adjust the hour, then short press M to confirm.
• Turn the TUNING shuttle to adjust the minutes, then short press M to confirm. The clock is now set.

5. Operation

5.1 Radio Operation (FM/AM/SW/WB)

Image: Radio displaying different frequency bands (WB, SW, FM, MW) with an antenna extended.

• Turn On Radio: Short press the power button to turn the radio ON.
• Select Band: Short press the BAND key to switch between FM, MW, SW, and WB.
• Shortwave Meter Band: In SW mode, press and hold the BAND button until the meter band icon flashes, then turn the TUNING shuttle to select a specific meter band.
• Antenna Usage: For FM and Shortwave, extend the whip antenna and adjust its angle for optimal reception. For MW and LW, rotate the entire radio body for best sensitivity.

5.1.1 Searching Radio Frequencies

• Manual Scan (VF): Short press the VM/VF button to enter VF mode, then slowly turn the TUNING knob to adjust the frequency.
• Automatic Browse (VF): Long press the VM/VF button to enter browsing mode. The radio will stop for 15 seconds on each scanned station. Short press VM/VF again to stop searching and listen, or let it continue scanning.
• Automatic Tuning System (ATS): Long press the ATS button in radio mode to automatically scan and store all available radio stations for the current band. Double-click ATS in shortwave mode to scan and store stations within the current meter band.

Tip: Radio signals can be affected by weather, environment, and antenna position. Update ATS memory frequently for best performance.

5.1.2 Storing and Recalling Stations

• Manually Store a Station:
  1. Manually search for the desired station using VF mode.
  2. Short press the MEY/DEL button. The station number in the upper right corner will flash.
  3. Short press the MEY/DEL button again to save the station.
• Manually Recall Stored Stations (VM):
  1. Short press the VM/VF button to enter memory radio mode.
  2. Turn the TUNING shuttle button to cycle through stored stations.
• Automatically Retrieve Stored Frequencies (VM):
  1. Select the desired band and short press the VM/VF button.
  2. Long press the MEY/DEL button to enter automatic browsing mode. The radio will scan each memory station for 5 seconds. Press MEY/DEL to select a station, or it will continue scanning.

5.1.3 Deleting Stored Stations

• Delete a Single Stored Station:
  1. Short press the VM/VF button to enter memory radio mode.
  2. Select the band.
  3. Turn the TUNING button to select the station frequency you wish to delete.
  4. Press and hold the MEY/DEL button for 3 seconds until "DEL" is displayed. Short press MEY/DEL again to confirm deletion.
• Delete All Stored Stations for the Current Band:
  1. Short press the VM/VF button to enter memory radio mode.
  2. Select the band.
  3. Press and hold the MEY/DEL button until the sub-display area shows "ALL". Release the button, then short press it again to confirm deletion of all stored stations in that band.

5.2 WB/NOAA Weather Alert

The radio supports 7 NOAA weather channels (162.400-162.550MHz).

• Manual Search: Turn on the radio, short press the BAND button to WB, then turn the TUNING shuttle to adjust the receiving frequency (162.400-162.550MHz).
• Automatic Scan and Alert: Turn on the radio, short press the BAND key to switch to any radio band. Long press the ALERT key to directly enter the "NOAA" automatic scanning warning reminder state. When a NOAA channel issues a disaster warning, the radio will emit an SOS sound and light synchronized warning.
• Eliminate SOS Warning: Long press the ALERT key to stop the SOS warning signal. The radio will then automatically tune to the NOAA disaster warning information receiving channel to provide voice warning information.

5.3 Flashlight and Reading Lamp

Image: Illustration of the radio's flashlight and reading lamp with three brightness levels.

• Flashlight (TORCH): In any state, short press the TORCH button to turn on the flashlight. There are 3 brightness levels. Repeatedly short press TORCH to cycle through brightness levels and turn off.
• Reading Lamp (LAMP): In any state, short press the LAMP button to turn on the reading lamp. There are 3 brightness levels. Repeatedly short press LAMP to cycle through brightness levels and turn off.

5.4 Bluetooth and MP3 Playback

Image: Radio demonstrating Bluetooth 5.0 connectivity with a smartphone.

• TF Card MP3 Player:
  1. Insert a TF card with music files into the TF card slot.
  2. Short press the M button to enter TF card MP3 playback state.
  3. Use the << and >> buttons for previous/next song. Long press for fast rewind/forward.
  4. Press the Play/Pause (►►) button to play or pause.
  5. To enable single loop playback, long press the BAND key (loop symbol icon). Long press again to exit single loop and enter all loop playback mode.
  6. For quick song selection, turn the TUNING shuttle button. Turning it continuously for more than one second will skip 30 songs forward or backward.
• Bluetooth Function:
  1. Short press the BT button to enter Bluetooth playback state.
  2. On your mobile phone, open Bluetooth settings and search for "D-608WB" to connect. The radio will indicate successful connection.
  3. Use the << or >> buttons, or turn the TUNING button, or select songs directly on your mobile phone.
  4. Wireless Calling: When connected via Bluetooth, short press the (phone icon) button to answer an incoming call, and short press again to end the call.
  5. Bluetooth Disconnection: Press and hold the (phone icon) button for 3 seconds to disconnect the current device. Long press again to reconnect.

5.5 SOS Danger Distress Signal

• In any state, long press the SOS button to activate the sound and light synchronized distress signal. Long press again to turn it off.

5.6 Sleep Timer Shutdown Mode

• Set Sleep Timer: Long press the (sleep icon) key. The sleep icon will flash. Turn the TUNING key to select the desired shutdown time (01-120 minutes). The display will flash for 3 seconds to confirm.
• Memory Sleep Timer: Short press the (sleep icon) key to enter the memory power-on state.
• Cancel Sleep Timer: Press and hold the (sleep icon) button, turn the TUNING shuttle button, and adjust the sleep time zone to (ON).

5.7 Alarm and Scheduled Shutdown Function

• Turn Alarm On/Off: Short press the M key. The alarm icon will light up (alarm ON). Short press M again to turn it off.
• Adjust Alarm Time and Duration:
  1. Press and hold the M key. The time in the secondary display area will flash.
  2. Rotate the TUNING shuttle button to adjust the hours, then short press M to confirm. Adjust the minutes, then short press M to confirm.
  3. The main display area will show the alarm duration flashing (0-60 minutes). Turn the TUNING key to select the duration, then short press M to confirm. The alarm icon will light up.
• Radio Alarm Mode: Turn on the power, select the desired radio frequency and volume. Press and hold the M key; the alarm icon will flash for 3 seconds to confirm.
• TF Card Music Alarm Mode: Insert a music TF card, turn on the power, short press the M key to enter TF card playback, and adjust the volume. Press and hold the M key; the alarm icon will flash for 3 seconds to confirm.
• Operations After Alarm: After the alarm activates, short press the power button twice to turn off the machine. To cancel the radio alarm lock frequency or music alarm lock, short press the power button once.

5.8 Keyboard Lock

• Lock: Press and hold the (lock icon) button for 5 seconds. The lock icon will light up, indicating the keyboard and TUNING button are locked.
• Unlock: Press and hold the (lock icon) button for another 5 seconds to unlock.

5.9 Display Content Switch

• In any operating state, repeatedly short press the ALERT key to cycle the content displayed in the upper right corner of the screen. Options include temperature, signal strength/signal-to-noise ratio, alarm time, local time, and memory radio frequency number.

5.10 Display Backlight Switch

• Press any button on the radio to activate the display backlight. It will light up for 5 seconds and then automatically turn off.

6. Maintenance

• Battery Care: Follow the safety guidelines for lithium batteries (Section 2). Ensure the battery is charged at least once every three months if not in regular use.
• ATS Memory: Regularly update the Automatic Tuning System (ATS) memory, especially if you notice changes in radio signal quality or available stations, as radio signals can be affected by environmental factors.
• Cleaning: Use a soft, dry cloth to clean the exterior of the radio. Do not use harsh chemicals or abrasive cleaners.

7. Troubleshooting

7.1 System Reset

In rare situations, such as accidental interference, keyboard/button malfunctions, or display confusion, a system reset may be necessary.

• To reset the system, locate the RESET hole (usually a small pinhole) and press the button inside with a sharp, non-metallic object (e.g., a straightened paperclip).

8. Specifications

9. User Tips

• The radio's many functions may require some practice to use correctly. Attentive reading of this manual is recommended.
• Some functions like Bluetooth, clock, alarm, and timer might not be immediately obvious from the device's inscriptions; refer to the manual for detailed usage.
• For radio station management, it's often more effective to use the auto scan feature and then manually remove unwanted stations, rather than trying to set up favorites directly.
• The sound quality is noted to be excellent for the radio's compact size.
• The internal 3000mAh battery offers a long operational time.
• Reception is generally very good, even in areas where other radios struggle. An external antenna (like the XHDATA AN80, if compatible) can further enhance reception in challenging environments.
• The solar charging feature works effectively for maintaining battery life or providing emergency power.
• The speaker provides clear and powerful audio output.
• If replacing the 18650 battery, ensure the new battery has a protruding positive terminal, as flat-top batteries may be too short to make proper contact.
• The digital clock remains visible even when the radio is turned off.
• The SOS alarm produces a loud sound for emergency signaling.
• The radio features a USB-C port for charging the unit, a standard USB-A port for charging external devices like phones, and a 3.5mm jack for headphones.
• This model does not support DAB radio.
• The radio exclusively uses an 18650 lithium battery and does not support AAA or AA batteries.
• There is no dedicated external antenna connector; the built-in whip antenna is used for FM/SW, and the radio's body for MW/LW.

10. Support and Contact Information

For further assistance or inquiries, please use the following contact methods:

• Skype: radiwow
• Email: xhdatacn@gmail.com
• Facebook: XHDATA
• Website: https://www.xhdata.com.cn
• Whatsapp: +86 18025193267

A PDF version of the user manual may also be available for download from the official website for detailed diagrams and instructions.