1. Important Safety Information
WARNING:
- Keep out of reach of children.
- In case of battery ingestion, seek medical attention immediately.
- Do not disassemble, squeeze, or puncture the battery.
- Do not mix old and new batteries or different types of batteries.
This appliance is intended for household use only. Do not use for commercial purposes.
2. Product Overview
The Hoopet Digital Kitchen Scale L-9999 is a high-precision electronic scale designed for accurate measurement of food ingredients in grams and ounces. Its compact design and stainless steel platform make it a versatile tool for any kitchen.
3. Setup
3.1 Battery Installation
- Locate the battery compartment cover on the underside of the scale.
- Open the battery compartment cover.
- Insert 2 x AAA batteries, ensuring the positive (+) and negative (-) polarities match the indicators inside the compartment.
- Close the battery compartment cover tightly.
Note: Batteries are not included with the scale.
3.2 Initial Placement
Place the scale on a hard, flat, and stable surface to ensure accurate readings. Avoid soft or uneven surfaces.
4. Operating Instructions
4.1 Power On/Off
- To power on: Press the ⑂ (Power) button. The display will light up and show "0.0g".
- To power off: Press and hold the ⑂ (Power) button for a few seconds until the display turns off. The scale also features an auto-off function to conserve battery life.
4.2 Unit Conversion (M Button)
To change the weighing unit (e.g., grams, ounces, pounds, etc.):
- With the scale powered on, press the M (Mode) button repeatedly to cycle through available units (g, oz, lb, tl, ct, dwt).
- The selected unit will be displayed on the screen.
4.3 Tare Function (T Button)
The Tare function allows you to subtract the weight of a container, so you only measure the contents:
- Place an empty container on the scale platform. The display will show the container's weight.
- Press the T (Tare) button. The display will reset to "0.0g".
- Add the items you wish to weigh into the container. The display will now show only the net weight of the items.
4.4 Piece Counting Function (PCS Button)
The PCS function allows you to count multiple items of the same weight:
- With the scale powered on and displaying "0.0g", place a sample quantity of items (e.g., 10, 20, 50, or 100 pieces) on the platform.
- Press and hold the PCS button until "PCS" appears on the display.
- Press the M button to select the sample quantity (e.g., P10, P20, P50, P100) that matches the number of items you placed.
- Press PCS again to confirm. The display will now show the number of pieces.
- You can now add more items, and the scale will count them.
5. Maintenance
5.1 Cleaning
- Wipe the scale platform and body with a soft, damp cloth.
- Do not use abrasive cleaners or immerse the scale in water.
- Ensure the scale is dry before storage or next use.
5.2 Battery Replacement
Replace the batteries when the display light dims or the scale fails to work correctly. Follow the battery installation steps in Section 3.1.
5.3 Storage
Store the scale in a cool, dry place. If not used for an extended period, it is recommended to remove the batteries to prevent leakage.
6. Troubleshooting
- Display shows "LO" or dims: Batteries are low. Replace with new 2 x AAA batteries.
- Display shows "O-Ld": The scale is overloaded. Remove items immediately to prevent damage.
- Inaccurate readings:
- Ensure the scale is on a stable, flat surface.
- Check if the batteries are properly installed and have sufficient power.
- Avoid placing the scale near strong electromagnetic fields or vibrating equipment.
- If possible, try recalibrating the scale (refer to the full PDF manual for advanced calibration steps if available).
- Scale does not turn on: Check battery installation and ensure batteries are new and correctly oriented.
7. Specifications
| Feature | Specification |
|---|---|
| Model | L-9999 |
| Brand | Hoopet |
| Scale Type | Digital |
| Material | Stainless Steel |
| Accuracy | 0.1g |
| Maximum Capacity | 3000g (3kg) (Note: Other capacities like 500g, 1000g, 2000g may be available for different variants) |
| Power Source | 2 x AAA Batteries (not included) |
| Dimensions (L x W x H) | 12.98 cm x 10.59 cm x 1.78 cm (5.11 in x 4.17 in x 0.7 in) |
| Certifications | CE, FCC |
| Approx. Package Weight | 0.236 kg |
| Approx. Package Dimensions (L x W x H) | 16 cm x 13 cm x 3 cm |
8. User Tips
- For optimal accuracy, always use the scale on a flat, stable surface.
- Remember to install 2x AAA batteries before first use, as they are typically not included.
- Handle the scale with care, as the display and platform can be fragile.
- Utilize the tare function for precise measurements when using containers.
9. Frequently Asked Questions (FAQ)
- Q: How do I use the scale if it didn't come with batteries?
- A: The Hoopet L-9999 scale requires 2 x AAA batteries, which are not included. Please purchase and install them according to the instructions in Section 3.1.
- Q: My scale is giving inconsistent readings. What should I do?
- A: Ensure the scale is placed on a perfectly flat and stable surface. Check the battery level and replace if necessary. Avoid placing the scale near electronic devices that might cause interference.
10. Warranty and Support
For warranty claims, technical support, or further assistance, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.
A detailed user manual in PDF format is also available for download: Download PDF Manual
Manufacturer Contact Information (as per CE REP):
Apex CESpecialists GmbHGrafenberger Alee 277, 40237 Dusseldorf, DE
Email: Info@apex-ce.com