SIMICAM 4K 8MP POE IP Camera Dome

Contents

SIMICAM 4K 8MP POE IP Camera Dome User Manual

Model: 4K 8MP POE IP Camera Dome

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SIMICAM 4K 8MP POE IP Camera Dome. Please read this manual thoroughly before using the product to ensure proper setup and functionality. This camera features ultra-wide angle lenses (1.6mm or 2.8mm options), 4K Ultra HD resolution, Power Over Ethernet (POE) capability, smart alarm functions, color night vision, and built-in audio recording.

SIMICAM 4K Ultra HD Dome Camera with Audio
Figure 1: SIMICAM 4K Ultra HD Dome Camera with Audio. Features 4K Ultra HD resolution and audio recording capabilities.

2. Safety Information

  • Ensure the power supply (POE 48V or DC 12V adapter) matches the camera's requirements.
  • Avoid exposing the camera to extreme temperatures outside its operating range (-10°C to 60°C).
  • Do not attempt to disassemble or modify the camera, as this will void the warranty and may cause damage.
  • Install the camera in a secure location to prevent unauthorized access or tampering.
  • Protect network cables from physical damage and ensure proper waterproofing for outdoor installations.

3. Specifications

Feature Specification
Brand NameSIMICAM
Megapixels8MP
High Definition8.0 Megapixels
Lens (mm)2.8mm, 1.6mm (Single Lens)
Viewing Angle140° (1.6mm lens), 100° (2.8mm lens)
ConnectivityIP / Wired Network
StyleDome Camera
InstallationCeiling, Normal, Wall-mounted
ColorWhite
MaterialPlastic Casing
Minimum Illumination0.01lux
Video Compression FormatH.265
IR Distance30M
Power Supply (V)POE 48V / DC 12V
AI FunctionsHuman Detection
Color Night VisionYes
Working Temperature-10°C to 60°C
Indoor/OutdoorIndoor
StorageNone (requires external NVR)
Micro SD CardNone
Compatible Operating SystemsNo (implies proprietary software/app for full functionality)
Ultra-Wide Angle Lens Comparison
Figure 2: Ultra-Wide Angle Lens Comparison. The 2.8mm lens offers a 100° viewing angle, while the 1.6mm lens provides a 140° viewing angle.

4. Setup

4.1. Physical Installation

The camera can be installed on the ceiling, wall, or placed on a flat surface. Ensure the mounting location provides a clear field of view and is within reach of power and network connections.

4.2. Wiring the Camera to Your System

The SIMICAM IP camera supports both POE (Power Over Ethernet) and DC 12V power options. It is compatible with ONVIF NVRs.

POE Wiring Diagram for NVR and Switch
Figure 3: POE Wiring Diagram. Illustrates connecting the camera to a POE NVR or a POE switch. The camera can also be powered by a DC 12V adapter if not using POE.

Connection Notes:

  • DC12V IP Camera: Requires a 12V power adapter and an Ethernet connection to a router.
  • POE Camera: Can be powered directly by a POE NVR or a POE switch via Ethernet.
  • Alternative Power: POE cameras can also work with a 12V DC adapter.

4.3. Initial Software Setup (IPCBatchTool & Browser Access)

To configure advanced settings, it is recommended to access the camera's IP address via a web browser on a computer connected to the same local area network (LAN).

  1. Download IPCBachTool: Use the QR code provided in the manual (or search online) to download the IPCBachTool. This tool helps discover and modify camera IP addresses.
  2. Default Credentials: The camera is set to DHCP by default. The default username is admin and the default password is 123456.
  3. Modify IP Address:
    • Use IPCBachTool to find your camera's IP address.
    • You can set a fixed IP address for the camera. Important: The camera's IP network segment must be consistent with the network segment of your NVR, computer, and LAN. For example, if your camera's IP is 192.168.1.10, the network segment is '1', so your NVR, computer, and LAN should also be on the '1' segment (e.g., 192.168.1.x).
  4. Browser Access:
    • Open a web browser (Windows IE browser is recommended, and you may need to install a browser plug-in for the first visit).
    • Enter the camera's IP address in the browser's address bar.
    • Log in using the default username (admin) and password (123456).
    • From the browser interface, you can configure various settings, including alarm warning areas.

4.4. Mobile App Setup (Linklemo)

For remote viewing and P2P video access on your smartphone, use the Linklemo app.

  1. Download the App:
    • For iPhone: Search for "Linklemo" in the Apple App Store.
    • For Android: Scan the QR code provided in the manual (or search for "Linklemo" or "Watilon" in your app store) to install.
  2. Connect to Network: Ensure the camera is connected to your LAN switch and is on the same local area network as your phone during initial setup.
  3. Register and Add Camera:
    • Open the Linklemo app, register a new user account, and set a password.
    • Follow the in-app instructions to add your camera. This typically involves scanning a QR code on the camera or manually entering its ID.
    • Name your device for easy identification (e.g., "Living Room Camera", "Corridor Camera").

5. Operating the Camera

5.1. Day and Night Vision Modes

The camera automatically switches between different vision modes based on ambient light conditions:

  • Day Vision: Standard color video during daylight hours.
  • IR Night Vision: Infrared black-and-white video in low-light or dark conditions.
  • Full Color Night Vision: Provides color video even in low-light conditions, enhancing detail and clarity.
Day, IR Night, and Full Color Night Vision Modes
Figure 4: Day, IR Night, and Full Color Night Vision Modes. Demonstrates the camera's ability to provide clear images in various lighting conditions.

5.2. Smart Alarm and AI Human Detection

The camera features AI human detection to minimize false alarms and can send smart email alerts.

  • AI Human Detection: The camera can distinguish human shapes from other moving objects, reducing unnecessary alerts.
  • Email Alerts: Configure email alerts in the camera's browser settings (refer to Section 4.3) to receive notifications on your mobile device or computer when human motion is detected.
Smart Email Alert with AI Human Detection
Figure 5: Smart Email Alert with AI Human Detection. Shows how the camera detects human presence and triggers email notifications.

5.3. Audio Recording

The camera includes a built-in microphone for authentic sound video recording.

  • The microphone records audio in the camera's vicinity, providing an additional layer of surveillance.
  • Ensure audio recording is enabled in the camera's settings if desired.
Built-in Microphone for Audio Recording
Figure 6: Built-in Microphone for Audio Recording. The camera captures audio to complement video surveillance.

6. Maintenance

  • Cleaning: Gently wipe the camera lens and casing with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Firmware Updates: Periodically check the manufacturer's website or app for firmware updates to ensure optimal performance and security.
  • Network Check: Regularly verify network connectivity to ensure continuous surveillance.
  • Power Supply: Ensure stable power supply. For DC12V connections, check the adapter and cable for damage.

7. Troubleshooting

  • Camera Not Connecting:
    • Verify power supply (POE or DC 12V adapter).
    • Check Ethernet cable connection to router/NVR.
    • Ensure the camera's IP network segment is consistent with your LAN/NVR (refer to Section 4.3).
    • If using a DC12V camera, ensure the 12V power adapter is connected.
  • Cannot Access Camera via Browser:
    • Confirm the camera's IP address using IPCBachTool.
    • Ensure your computer is on the same network segment as the camera.
    • Try using Windows IE browser and install any required plugins.
    • Verify default login credentials (admin/123456).
  • Mobile App Connection Issues:
    • Ensure the camera is powered on and connected to the network.
    • Verify your phone has internet access.
    • Confirm the Linklemo app is updated to the latest version.
    • If issues persist, try resetting the camera (refer to the camera's physical reset button, if available, or consult technical support).
  • No Night Vision:
    • Check if the IR LEDs are obstructed.
    • Ensure the camera is in a sufficiently dark environment for night vision to activate.
  • No Audio Recording:
    • Verify that the built-in microphone is enabled in the camera's settings.
    • Check audio settings on your viewing device or NVR.

8. User Tips

  • For P2P video viewing on your phone, the recommended mobile application is Linklemo.
  • When setting up the camera's IP address, always ensure its network segment matches your NVR and local network to avoid connectivity issues.
  • If you encounter difficulties, remember that each camera is tested before shipping. Contact technical support for assistance.

9. Warranty and Support

For technical support or if you encounter any difficulties, please contact us via email. We aim to reply within 48 hours.

Technical Support Contacts:

  • 454400423@qq.com
  • m15800032384@163.com
  • 453836824@qq.com

This manual may contain some incorrect information, and new updates will be added to the next release without notice. Your valuable advice is appreciated.

A comprehensive user manual in PDF format is also available for download: Download User Manual PDF

© 2023 SIMICAM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.