saimili LED COB Light Strip USB Touch Sensor

Contents

SAIMILI USB COB LED Strip Light User Manual

Model: LED COB Light Strip USB Touch Sensor

Introduction

Thank you for choosing the SAIMILI USB COB LED Strip Light. This flexible and energy-efficient lighting solution is designed for a variety of applications, offering easy installation and adjustable brightness. Please read this manual carefully before use to ensure proper operation and longevity of your product.

SAIMILI USB COB LED Strip Light on a spool with USB cable and touch switch

Figure 1: SAIMILI USB COB LED Strip Light with USB power and touch control.

Product Features

  • Lightweight and Easy to Use: Low voltage power supply, easy to carry, suitable for a variety of scenes.
  • Energy Saving: Compared with traditional light bulbs, it offers low power consumption and low heat generation.
  • Long Life: The service life is up to 25,000 hours, reducing the frequency of light strip replacement.
  • Flexible and Mouldable: Adopting flexible material, it can be easily installed on irregular surfaces.
  • Touch Sensor Control: Integrated touch switch for convenient ON/OFF and brightness adjustment.

Specifications

Close-up of COB light strip, USB touch switch, product specifications, and cutting position.

Figure 2: Detailed view of the COB light strip and USB touch switch, including specifications and cutting marks.

Product Specifications
Attribute Value
Product NameUSB COB Light Strip
Model NumberLED COB Light Strip USB Touch Sensor
Brand Namesaimili
Item TypeStrip
Strip TypeCOB
Power SourceDC
Voltage5V
Power GenerationTouch
Luminous Flux60-249 Lumens
LEDs Number/Meter320
Light Strip Width0.31 inch / 0.79 cm
Glow ColorMonochromatic luminescence (Available in Cold White, Warm White, Natural White)
Color Temperature (Warm White)3000K
Control MethodsSwitch Touch (brightness level)
Length Options1m, 2m, 3m, 4m, 5m
WaterproofNo
Is Smart DeviceNo
Is Batteries IncludedNo
CertificationCE, EMC, LVD, ROHS
OriginMainland China
Package Length17 cm
Package Width11 cm
Package Height3 cm
Package Weight0.077 kg

Setup Instructions

  1. Prepare the Surface: Ensure the installation surface is smooth, clean, and dry.
  2. Measure and Cut (Optional): If a shorter length is desired, the LED strip can be cut at the designated cutting marks (indicated by a scissor icon on the strip, see Figure 2). Ensure to cut only at these marks to avoid damaging the circuit.
  3. Attach the Strip: The back of the LED strip has an adhesive layer. Peel off the protective backing and firmly press the strip onto the desired surface.
  4. Connect Power: Plug the USB connector into a 5V DC USB power source (e.g., USB wall adapter, power bank, computer USB port). Ensure the power source is capable of providing sufficient current (e.g., 2A for brighter illumination).
Ultra thin COB light strip emitting light, highlighting its seamless illumination.

Figure 3: The ultra-thin COB light strip provides seamless illumination.

Operating Instructions

The SAIMILI USB COB LED Strip Light features an inline touch switch for easy control:

  • Turn ON/OFF: Short press the touch switch button to turn the LED strip ON or OFF.
  • Adjust Brightness: Long press the touch switch button to adjust the brightness level. The brightness will cycle from 0% to 100%. Release the button when the desired brightness is reached.
Diagram illustrating the touch switch functionality for ON/OFF and brightness adjustment.

Figure 4: Touch switch operation for ON/OFF and brightness adjustment.

Maintenance

  • Cleaning: Use a dry cloth to wipe the surface of the strip. Avoid using cleaning agents containing chemicals or alcohol, as these may damage the strip.
  • Storage: Store the strip in a dry, cool place, away from direct sunlight and high-temperature environments.
  • Duration of Use: It is recommended to use the strip for no more than 10 hours a day to prolong the service life of the lamp beads.

Troubleshooting

Common Problems and Solutions
Problem Possible Cause Solution
Lamp beads do not light Power supply or wiring problems. Check if the power supply is normal and connections are secure.
Brightness adjustment failure Switch malfunction. Check if the switch is normal; try to re-adjust it.
Broken wire when bending the strip Excessive bending angle. Avoid frequent or sharp bending of the strip.
Flickering lamp beads Poor line contact or power supply problems. Check if the line connection is firm and the power supply is stable.

Safety Precautions

  • Do not use this LED strip in a humid environment, as this may cause leakage or short circuit.
  • Do not use this LED strip for a long time in a high-temperature environment to prevent overheating and damage to the lamp beads.
  • Do not immerse this LED strip in water for a long time to prevent short circuit and electric shock.
  • Please make sure the power cord is firmly connected before use to prevent electric shock or fire caused by detachment during use.

User Tips

  • The COB LED strip provides very bright illumination and adheres well to smooth surfaces.
  • For extended use without a wall adapter, a power bank with good capacity is recommended.
  • The light is designed to be soft and easy on the eyes, yet powerful and fully dimmable via the touch switch.
  • Optimal brightness is often achieved with a 2 Ampere (2A) USB output, compared to a 1 Ampere (1A) output which may result in dimmer light.
  • The touch sensor for brightness adjustment and ON/OFF functionality is highly responsive and works effectively.

Frequently Asked Questions (FAQ)

Q: How many pins does this tape have?
A: This is a 5V DC COB LED strip, typically using a 2-pin connection for power (positive and negative).
Q: What is the power consumption per meter and the voltage range?
A: The power consumption is approximately 5.2 Watts per meter. The operating voltage is 5V DC.

Warranty and Support

For detailed warranty information and customer support, please refer to the official product page or contact the seller directly. A comprehensive user manual in PDF format is also available for download:

Download Full User Manual (PDF)

Information to User (FCC Statement)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.