1. Introduction
The DATA FROG X3 is a versatile 2-in-1 cooling fan stretch gamepad designed to enhance your mobile and console gaming experience. It features a built-in cooling system, motor vibration, Hall effect joysticks and triggers, and Bluetooth 5.2 connectivity. The controller's tensile structure allows it to accommodate a wide range of devices.

Figure 1: DATA FROG X3 Wireless Controller highlighting Cooling System, BT 5.2, Motor Vibration, Hall Joystick, Hall Trigger, and Tensile Structure.
Key Features:
- 2-in-1 Design: Gamepad with integrated cooling fan.
- Wide Compatibility: Supports Android smartphones (Android 6.3 and above), Nintendo Switch, Nintendo Switch OLED, and PC.
- Adjustable Fit: Accommodates devices from 3.94 to 6.89 inches (10-17cm), even with protective cases.
- Precision Control: Hall Technology for precise joystick and trigger response.
- Enhanced Immersion: Motor vibration feedback.
- Connectivity: Bluetooth 5.2 for stable wireless connection.

Figure 2: The X3 Gamepad is a 2-in-1 cooling fan stretch gamepad compatible with Android, Nintendo Switch, and PC.
2. Setup Guide
2.1 Package Contents
Please check the package for the following items:
- DATA FROG X3 Wireless Controller
- USB Charging Cable
- User Manual
- Thumb Grip Caps (2x)

Figure 3: Contents of the DATA FROG X3 package, including the controller, USB cable, user manual, and thumb grips.
2.2 Charging the Controller
Before first use, fully charge the controller. Connect the supplied USB cable to the controller's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The indicator lights will show charging status and turn off or change color when fully charged.
2.3 Device Compatibility and Placement
- Smartphones: Compatible with Android 6.3 and above. Supports phone sizes from 3.94 to 6.89 inches (10-17cm).
- Nintendo Switch/OLED: Compatible with both models.
- PC: Compatible with Windows operating systems.
To place your smartphone, gently extend the controller's tensile structure and insert your device. Ensure it is securely seated.

Figure 4: The controller's adjustable fit supports devices from 3.94 to 6.89 inches, including phones with cases, Nintendo Switch, and Switch OLED.

Figure 5: The controller is ready for Android devices running version 6.3 or above.
2.4 Initial Pairing
To pair the controller with your device, follow the specific instructions below. The controller's indicator lights will flash during pairing and become solid once connected.

Figure 6: Excerpt from the user manual showing connection diagrams for Android, Nintendo Switch, and Windows.
- Android Connection:
Press and hold the X button + HOME button simultaneously for 2 seconds. Indicator light 1 will flash. On your Android device, search for Bluetooth devices and select 'X3 Controller' (or similar). - Nintendo Switch Connection:
Press and hold the R1 button + HOME button simultaneously for 2 seconds. Indicator light 2 will flash. On your Nintendo Switch, navigate to 'Controllers' > 'Change Grip/Order' and allow it to search for the controller. - PC (Windows) Connection:
Press and hold the L1 button + HOME button simultaneously for 2 seconds. Indicator light 3 will flash. On your PC, go to Bluetooth settings, add a new device, and select 'X3 Controller' (or similar).
3. Operating Instructions
3.1 Power On/Off
- Power On: Press the HOME button briefly. The controller will attempt to connect to the last paired device.
- Power Off: Press and hold the HOME button for 5 seconds until the indicator lights turn off. The controller will also power off automatically after a period of inactivity.
3.2 Cooling Fan Operation
The integrated cooling fan helps dissipate heat from your smartphone during extended gaming sessions. Connect the USB charging cable to the controller's dedicated fan power input (usually a separate USB-C port if available, or the main charging port if shared) and to a power source to activate the fan. The fan operates independently of the controller's battery.
3.3 Motor Vibration
The controller features motor vibration for haptic feedback. The intensity of the vibration may be adjustable through game settings or specific controller button combinations (refer to the full PDF manual for advanced settings).
3.4 Button Layout
The DATA FROG X3 features a standard gamepad layout:
- Left Side: D-pad (directional pad), Left Analog Stick, L1/LB (shoulder button), L2/LT (trigger).
- Right Side: A/B/X/Y face buttons (Xbox layout), Right Analog Stick, R1/RB (shoulder button), R2/RT (trigger).
- Center: HOME button, Select/Back button, Start/Menu button.

Figure 7: Illustration of Hall Technology providing precise joystick and trigger control with a smooth response curve.
4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the controller. Do not use abrasive cleaners or solvents.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in use for extended periods.
- Avoid Drops: Do not drop or subject the controller to strong impacts, as this may damage internal components.
5. Troubleshooting
- Controller Not Connecting:
- Ensure the controller is charged.
- Make sure Bluetooth is enabled on your device.
- Verify you are using the correct pairing mode (X+HOME for Android, R1+HOME for Switch, L1+HOME for PC).
- Try unpairing the controller from your device's Bluetooth settings and re-pairing. - Buttons Unresponsive/Lag:
- Check battery level.
- Ensure the controller is within range of your device.
- Restart both the controller and your device.
- If the controller becomes unresponsive or