GMAIPOP F410

Contents

GMAIPOP F410 4-Channel WiFi Dashcam User Manual

Model: F410

1. Introduction

Thank you for choosing the GMAIPOP F410 4-Channel WiFi Dashcam. This device is designed to provide comprehensive surveillance for your vehicle, recording from the front, left, right, and rear perspectives. Equipped with features like Full HD 1080P recording, night vision, G-sensor, parking monitor, and WiFi connectivity, it ensures reliable documentation of your journeys and vehicle security. Please read this manual carefully before installation and operation to ensure proper use and optimal performance.

2. Product Overview

2.1. Key Features

  • 4-Channel Recording: Simultaneous recording from front (1080P), left, right, and rear cameras (720P).
  • Wide View Angle: Front 120°, Left 100°, Right 100°, Rear 100°.
  • Full HD 1080P: High-definition video recording for clear details.
  • WiFi Connectivity: Connect to the dashcam via the 'Framefox' or 'Viidure' app for live view, file management, and settings adjustment.
  • G-Sensor: Automatically detects collisions and locks video files to prevent overwriting.
  • Parking Monitor: Records and locks video files if a collision or shaking is detected while parked.
  • Loop Recording: Continuously records by overwriting the oldest unlocked files when the memory card is full.
  • Night Vision: Enhanced low-light recording capabilities with WDR technology and 8 IR lights.
  • Built-in Screen: For live view and playback directly on the device.
  • Max External Memory: Supports up to 128GB Micro SD/TF card (Class 10 recommended).

2.2. Dashcam Components and Buttons

Refer to the diagrams below for an overview of the dashcam's physical components and button functions.

Diagram of Dashcam Buttons and Ports
Figure 1: Dashcam Front and Bottom View with Labeled Buttons and Ports
Dashcam Button and Port Functions
No. Name Function
1 Reset hole Resets the Dashcam.
2 Power button Long-press for 3 seconds to turn ON/OFF.
3 OK button
  • Short-press once to start/stop video recording.
  • Short-press once to play/pause current video in playback mode.
  • Short-press once to enter/save settings in menu.
4 Up button
  • Short-press once to scroll up in menu settings.
  • Short-press once to switch display windows (front, rear, left/right camera).
  • Short-press once to scroll to previous video files in playback mode.
5 Down button
  • Short-press once to scroll down in menu settings.
  • Short-press once to mute audio recording in video mode.
  • Short-press once to scroll to next video files in playback mode.
6 Menu/Mode
  • Long-press once (non-recording status) to enter Menu Settings.
  • Short-press (in Menu status) to exit Menu Settings.
  • Short-press (non-recording status) to enter Video Playback Mode.
7 Power slot (USB-C) Connect a USB cable or car charger.
8 Rear camera port Connect the rear camera.
9 TF Card slot Insert a micro-SD card to record and save videos.
10 Fill light Lights for the right & left cameras, turn on automatically in low brightness.

3. Installation Guide

3.1. Micro SD Card Installation

  1. Ensure the dashcam is powered off.
  2. Insert a Class 10 or higher Micro SD card (up to 128GB) into the TF Card slot (9) until it clicks into place.
  3. To remove, gently push the card until it pops out.

Important Note: A high-quality Micro SD card is crucial for stable recording and to avoid error messages during playback. The product does not include a memory card by default, unless specified in your purchase option (e.g., 32G Card, 64G Card, 128G Card).

3.2. Install Front Dash Cam

  1. Clean the Windshield: Thoroughly clean your windshield glass to remove dust particles and grease. A clean surface ensures strong adhesion for the suction mount.

    Cleaning the windshield
    Figure 2: Cleaning the windshield surface.
  2. Prepare Suction Bracket: Insert the suction bracket into the dashcam. Ensure to remove any protective film from the suction cup for proper adhesion.

    Inserting suction bracket and removing film
    Figure 3: Inserting the suction bracket and preparing the suction cup.
  3. Attach Dashcam: Attach the dashcam with the suction mount to the cleaned windshield. Adjust the camera lens to point forward towards the center of the road.

Important Notes:

  • Ensure the installation position is cleaned correctly.
  • Ensure the protective film is removed from the suction cup.
  • Ensure the suction of the bracket is locked tightly. Loose suction can cause the bracket to drop during recording.

3.3. Install Car Charger

Connect the car charger to the dashcam's USB-C port (7) and route the cable according to one of the wiring methods below. Please use the original car charger provided to avoid fault or incompatibility.

Car charger wiring method A
Figure 4: Car charger wiring method A (cable routed along the top and side of the windshield).
Car charger wiring method B
Figure 5: Car charger wiring method B (cable routed along the top and down the A-pillar).

3.4. Install Rear Camera

  1. Insert Rear Cam: Insert the rear camera into the dashcam body completely.

    Inserting rear camera into dashcam
    Figure 6: Rear camera inserted into the main dashcam unit.
  2. Route Rear Camera Cable: Install the rear camera's cable according to the diagram below. There are two common wiring methods:

    Rear camera cable routing diagrams
    Figure 7: Rear camera cable routing methods (A and B).
    1. Hide Cable in Top Panel: Hide the cable into the top panel of the car interior.

      Hiding cable in top panel
      Figure 8: Routing cable into the car's top panel.
    2. Loosen Side Panel: Slightly loosen the side panel and insert the cable carefully, especially if airbags are present.

      Loosening side panel for cable routing
      Figure 9: Carefully routing cable behind the side panel.
    3. Insert Cable Along Door Seal: Insert the cable along the door's rubber seal, continuing until you reach the trunk area.

      Routing cable along door rubber seal
      Figure 10: Cable routing along the door's rubber seal.
    4. Loosen Trunk Panel: Loosen the trunk's panel and route the cable as per the red diagram.

      Routing cable in trunk panel
      Figure 11: Cable routing within the trunk panel.
    5. Connect to Reversing Light (Optional): Connect the rear camera's red cable to the positive pole of the reversing light. This connection enables the reversing image to display automatically when the car is in reverse. If you do not need this feature, you can skip this step.

      Connecting to reversing light
      Figure 12: Connecting the red cable to the reversing light.
    6. Attach Rear Camera: Attach the 3M sticky tape to the rear camera's bracket and adjust the angle. Secure the rear camera in the middle and above the license plate frame.

      Attaching rear camera with 3M tape
      Figure 13: Attaching the rear camera bracket with 3M tape.
    7. Connect Rear Camera Cable: Connect the rear camera to the wired cable. Align the two arrows on the connectors for a proper connection.

      Connecting rear camera cable
      Figure 14: Connecting the rear camera to its cable, ensuring arrow alignment.

Important Note: Ensure all connections are secure for optimal functionality.

4. Operating Instructions

4.1. Power On/Off

Long-press the Power button (2) for approximately 3 seconds to turn the dashcam ON or OFF.

4.2. Recording

  • Start/Stop Recording: Short-press the OK button (3) once to start or stop video recording.
  • Loop Recording: The dashcam automatically records in a loop. When the Micro SD card is full, the oldest unlocked video files will be overwritten.
  • G-Sensor: In case of a sudden impact or collision, the G-sensor will automatically save the 10 seconds before and 30 seconds after the event, locking these files to prevent them from being overwritten.
  • Parking Monitor: If enabled, the dashcam will automatically turn on and record/lock video files if it detects a collision or shaking while the vehicle is parked.
G-Sensor, Parking Monitor, Loop Recording features
Figure 15: Illustration of G-Sensor, Parking Monitor, and Loop Recording functions.

4.3. Menu Navigation

  • Enter Menu Settings: Long-press the Menu/Mode button (6) once when the dashcam is not recording.
  • Exit Menu Settings: Short-press the Menu/Mode button (6) while in the menu.
  • Scroll Up/Down: Use the Up button (4) and Down button (5) to navigate through menu options.
  • Select/Save: Short-press the OK button (3) to enter a setting or save changes.
  • Switch Display Windows: Short-press the Up button (4) to cycle through display views (front camera, rear camera, left/right camera).
  • Mute Audio: Short-press the Down button (5) to mute audio recording in video mode.

4.4. Playback Videos

You can playback recorded videos using two methods:

Method 1: Playback on a PC

  1. Power off the dashcam and remove the Micro SD card.
  2. Insert the Micro SD card into a card reader connected to your PC.
  3. Access the video files on the card and play them using a compatible media player.

Method 2: Playback on the Dashcam

  1. Stop any active recording.
  2. Short-press the Menu/Mode button (6) to enter Playback Mode.
  3. Use the Up button (4) and Down button (5) to scroll through and select video files.

    Dashcam Playback Mode Interface
    Figure 16: Dashcam screen showing the playback mode interface.
  4. Short-press the OK button (3) to play or pause the selected video.
  5. Long-press the Menu/Mode button (6) to delete or protect the current file.
  6. Short-press the Menu/Mode button (6) to exit Playback Mode.

4.5. Connecting WiFi and App Usage

The dashcam supports WiFi connectivity for easy management via a smartphone app (Framefox / Viidure).

Step 1: App Download and Installation

  1. Scan the QR code below with your smartphone to download the app.
  2. Install and launch the app. Select "Viidure" or "Framefox" from the menu.
QR codes for iOS and Android app download
Figure 17: QR codes for downloading the companion app (iOS and Android).

Step 2: Adding the Device

For iPhone:

  1. Go to your iPhone's Wi-Fi settings.
  2. Select the dashcam's Wi-Fi network.
  3. Enter the default Wi-Fi password: 12345678.
  4. Once connected, open the "Viidure" app and complete the device addition process.

For Android:

  1. Open the "Viidure" app.
  2. Tap "Add Camera" and follow the on-screen guide.
  3. In your phone's system Wi-Fi settings, select the dashcam's Wi-Fi network and enter the default password: 12345678.
  4. After connecting, return to the app to complete the device setup.

Step 3: App Interface Overview

  • Camera Section: Manage your dashcam, add/view/delete devices, and enter video preview mode.
  • Photo Album: Access and manage pictures or videos downloaded from the dashcam.
  • More Section: Adjust app settings (e.g., language preferences), provide feedback, or access additional information.

Step 4: Dashcam Functions via App

  • Taking Photos: Control the dashcam to capture photos, which are saved directly to the device.
  • Video Playback and Full Screen: Switch between full-screen video and a zoomed-out view.
  • Camera Files: Access the dashcam's file list, organized into categories: Loop Recordings, Photo Files, Emergency Events, Parking Monitoring.
  • Camera Settings: Adjust settings like recording resolution and microphone controls.

Step 5: Downloading and Playing Files via App

  1. Navigate to "Camera Files" in the app.
  2. Select desired photos or videos.
  3. Tap "Download" to save them to your phone, where they can be viewed in the "Photo Album" section of the app.

Step 6: Managing Photo Albums via App

Access the "Photo Album" to organize and manage downloaded media. Files are arranged by date. Use the "Select" option for batch operations. Categories include Videos, Pictures, and Emergency Documents.

Step 7: Video Playback Options via App

Browse videos at varying speeds, from slow motion (e.g., 1 frame per second) to fast-forward (e.g., 10x speed).

Step 8: Document Editing via App

Use the app's editing features to enhance your media:

  • Images: Crop, apply filters, and beautify.
  • Videos: Clip segments, add music, and perform other customization.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the dashcam lens and screen. Avoid using abrasive cleaners or solvents.
  • Temperature: Operate and store the dashcam within the specified working temperature range (-20℃ to 65℃). Extreme temperatures can affect performance and battery life.
  • Firmware Updates: Check the official app or website periodically for firmware updates to ensure optimal performance and new features.
  • Memory Card: Regularly format your Micro SD card (at least once a month) to prevent data corruption and ensure smooth recording. Back up important files before formatting.

6. Troubleshooting

Dashcam does not power on:
Ensure the car charger is properly connected and the vehicle's power outlet is functioning. Check the power cable for damage. If using a hardwire kit, ensure correct installation. The dashcam requires continuous power from the car charger to operate.
Recording stops or files are corrupted:
This is often due to a low-quality or faulty Micro SD card. Use a Class 10 or higher speed card from a reputable brand. Format the card regularly. If the issue persists, try a new Micro SD card.
WiFi connection issues:
Ensure you are selecting the correct Wi-Fi network from the dashcam and entering the default password (12345678) correctly. Make sure the app is updated to the latest version. Some users report that Wi-Fi setup can be tricky; try restarting both the dashcam and your phone.
Rear camera not displaying or recording:
Check all cable connections for the rear camera, ensuring they are secure and properly aligned (e.g., arrows on connectors). Verify the rear camera is fully inserted into the main dashcam unit.
Parking monitor not working as expected:
Ensure the parking monitor feature is enabled in the dashcam settings. Note that the dashcam's internal battery capacity (150mAh) is small and primarily for emergency file saving, not extended parking mode. For continuous parking monitoring, a hardwire kit (if purchased) is recommended to draw power directly from the car battery.
Image quality is not clear:
Ensure all camera lenses are clean and free from dirt or smudges. Check the recording resolution settings in the menu or app. While the front camera is 1080P, side and rear cameras are 720P.
Dashcam gets hot during operation:
It is normal for electronic devices to generate some heat during operation. As long as it's within the working temperature range (-20℃ to 65℃), it should be fine. Ensure adequate ventilation around the device.

7. Specifications

Feature Specification
Brand Name GMAIPOP
Assembly Mode Portable Recorder
Number Of Lenses 4
Camera Resolution 1920x1080 (Front), 720P (Left, Right, Rear)
Pixels 200Mega
Imaging Sensor Sony IMX307
View Angle 170° (Front), 100° (Left, Right, Rear)
Aperture F2.0
Video Code H.264
Video Format AVI
Frames Per Second 30
Max External Memory 128G
Memory Card Required Reading Speed Class 10
Display Size 3"-5"
Display IPS
Screen Ratio 16:9
Built-in Screen Yes
Touch Screen No
Rear Camera Yes
NightShot Function Yes
Loop-Cycle Recording Feature Yes
Audio Recorded Yes
Special Features G-Sensor, Display Rotate
GPS logger None
Power Source Corded Electric
Battery Type Lithium battery (built-in)
Battery Capacity (mAh) 150mA
Battery Life Please connect to the power supply (battery for emergency only)
Working Temperature -20℃ - 65℃
Cable Length Car charger: 3 m; Rear cable: 6 m
APP Compatibility Framefox / Viidure
OSD Language Arabic, Chinese (Simplified), Chinese (Traditional), English, French, Japanese, Korean, Russian, Spanish
Certification CE, FCC

8. User Tips

  • High-Quality SD Card: Always use a high-quality (Class 10 or higher) Micro SD card to prevent recording errors and ensure smooth playback.
  • Cable Length: Be aware that the rear camera cable length (6m) might be insufficient for longer vehicles like vans or some SUVs. Measure your vehicle's length before installation.
  • Power Connection: The dashcam is designed to be continuously powered by the car charger. The built-in battery is primarily for emergency file saving (e.g., G-sensor events) and not for extended operation without external power.
  • Wi-Fi Setup: If you encounter issues with Wi-Fi connectivity, try restarting both the dashcam and your smartphone. Ensure you have the correct app (Framefox or Viidure) and the default password (12345678).
  • Language Settings: The device supports multiple languages. If your preferred language is not set, navigate to the OSD Language settings in the menu to change it.
  • Night Vision: The dashcam features excellent night vision. For optimal night recording, ensure your windshield is clean.

9. Warranty and Support

For any after-sales inquiries or technical support, please contact:

Email: ricardozed23@gmail.com

This product is certified with CE and FCC standards.

A detailed user manual in PDF format is also available for download. Please refer to the seller's product page for the direct link to the PDF manual.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.