1. Introduction
The ANYFAR Wireless CarPlay Android Auto Module integrates seamlessly with your Mercedes-Benz NTG 5.0 system, bringing advanced smartphone connectivity to your vehicle's display. This module allows for wireless and wired connections to both Apple CarPlay and Android Auto, enabling access to navigation, music, calls, messages, and voice assistants directly through your car's central control knob and steering wheel buttons.
Key functionalities include:
- CarPlay / Android Auto: Full integration with your smartphone for navigation, music playback, communication, and voice control (Siri/Google Assistant).
- Reversing Video Input: The smart module can decode video signals, allowing for the integration of an aftermarket rear-view camera system.

Image: ANYFAR Wireless CarPlay/Android Auto Module overview, showing the device, compatible Mercedes models, and in-car display.
2. Compatibility
This module is designed exclusively for Mercedes-Benz vehicles equipped with the NTG 5.0 system. It is NOT compatible with NTG 4.0, 4.5, or 4.7 systems.
2.1. Compatible Mercedes-Benz Models and Years
| Class | Chassis Code | Years |
|---|---|---|
| A Class | W176 | 2016-2018 |
| B Class | W246 | 2016-2018 |
| CLA Class | C117 | 2016-2018 |
| CLS Class | W218 | 2015-2016 |
| E Class (Sedan) | W212 | 2015 |
| E Class (Coupe) | C207 A207 | 2015 |
| G Class | W463 | 2016-2017 |
| GLA Class | X156 | 2016-2018 |
| GLC Class | X253 C253 | 2015-2018 |
| GLE GLS Class | W167 X166 | 2016-2018 |
| SLK | R172 | 2016-2018 |
| S Class | W222 | 2014-2018 |
| CL Class | W216 C216 | 2014-2018 |
| V Class | W447 | 2015-2018 |
| X Class | W470 | 2015-2018 |

Image: Table of suitable Mercedes-Benz models and their compatible years.
2.2. Confirming Your Car's NTG System
It is crucial to identify your car's NTG system version before installation. Refer to the diagram below to confirm you have an NTG 5.0 system.

Image: Diagram to confirm car system type (NTG 4.0, 4.5, 5.0) based on control panel buttons and connector pins.
- NTG 4.0: Typically has a 10-pin connector and a 'C' or 'CLR' button on the right side of the control panel.
- NTG 4.5: Features a 4-pin connector and a 'CLEAR' button on the right side of the control panel.
- NTG 5.0: Identified by a 4-pin connector, a 'CLEAR' button located in the center of the control panel, and flat buttons.

Image: Compatibility list for NTG5.0 systems, including screen sizes and a visual guide to distinguish NTG5.0 from NTG4.7 and NTG4.5.
3. Kit Contents
Please check the package contents upon receipt to ensure all items are present:
- Main Module: 1 unit (Dimensions: 13.6cm x 7cm x 2.2cm)
- Power Cable: 1 unit
- LVDS Cable: 1 unit
- WiFi Antenna: 1 unit

Image: Kit contents including the main module, power cable, LVDS cable, and WiFi antenna, with module dimensions.
4. Setup and Installation
Professional installation is recommended. Ensure the vehicle's power is off before beginning installation.
4.1. DIP Switch Settings
Before connecting the module, configure the DIP switches (located on the module) according to your specific car model and screen size. Refer to the table and image below:

Image: Image showing the module's DIP switch location and the DIP switch settings table for NTG5.0/5.1 based on car model and screen size.
| Switch 1 | Switch 2 | Car Model |
|---|---|---|
| OFF | OFF | C / GLC / V / S |
| OFF | ON | A / B / CLA / CLS / GLA / GLE / GLS / E |
| Switch 3 | Switch 4 | Screen Size |
| OFF | ON | 800*480 (7.4"/8.4") |
| ON | OFF | 960*540 (8.4") |
| ON | ON | 1440*540 (12.3") |
4.2. Cable Connection
Follow the detailed connection chart below to properly integrate the module with your car's existing wiring. Ensure all connections are secure.

Image: Detailed cable connection chart for installing the module into the car's existing system.
Important: After all cables are connected, long press the "Back" button on your car's central control knob to switch between the original NTG 5 interface and the CarPlay/Android Auto interface.
5. Operating Instructions
5.1. Wireless CarPlay Connection
- On the module's interface, navigate to and open the Wireless CarPlay connection settings.
- On your iPhone, ensure both Bluetooth and Wi-Fi are turned ON.
- On your iPhone's Bluetooth settings, select the device named "CX_BT XXXX" (where XXXX is a unique identifier).
- Confirm the pairing request on both devices. A prompt will appear asking to "Use CarPlay". Select it to establish the connection.

Image: Screenshots demonstrating the step-by-step process for connecting Wireless CarPlay.
5.2. Wireless Android Auto Connection
- On the module's interface, navigate to and open the Wireless Android Auto connection settings.
- On your Android phone, ensure both Bluetooth and Wi-Fi are turned ON.
- On your Android phone's Bluetooth settings, select the device named "CX_BT XXXX".
- Confirm the pairing request. After successful Bluetooth pairing, follow any on-screen prompts on your phone and the car display to complete the Android Auto connection process.

Image: Screenshots demonstrating the step-by-step process for connecting Wireless Android Auto.
5.3. Audio Settings
To ensure proper audio output, configure the audio settings as follows:
- Navigate to Setup > Audio settings within the module's interface.
- Enable the option "Use the original Bluetooth audio" (set to ON).
- Connect your phone's Bluetooth directly to your car's original Bluetooth system (often labeled as "MB Bluetooth").
- Keep your phone connected to the car's original Bluetooth audio interface.
- On your phone, ensure the audio source is set to your car's Bluetooth.

Image: Screenshots illustrating the audio settings configuration within the module's interface.
5.4. Control Methods
The module is designed to be controlled using your car's original central control knob and steering wheel buttons.

Image: Images illustrating how to control the module using the original car's central knob and steering wheel buttons.
Central Control Knob:
- Long press: Switch between original car system and module interface.
- Short press: Confirm selection.
- Long press (after short press): Activate voice control.
- Right dial (15 seconds): Reset the system.
Steering Wheel Buttons:
- Long press: Switch between original car system and module interface.
- Short press (Answer button): Answer phone calls.
- Short press (Hang up/Activate button): Hang up calls or activate functions.
- Short press (Volume +/-): Increase or decrease volume.
- Long press (specific button, refer to car manual): Reset the system.
Note: Due to variations across different Mercedes models, specific button functions might differ slightly. Consult your vehicle's owner's manual if needed.
6. Maintenance
- Keep the module and its connections free from dust and moisture.
- Avoid exposing the module to extreme temperatures.
- Do not attempt to open or modify the module, as this will void any potential warranty.
- Clean the car's display screen with a soft, lint-free cloth suitable for electronics.
7. Troubleshooting
7.1. No Display / Black Screen
- Ensure all cables are securely connected according to the wiring diagram.
- Verify the DIP switch settings match your car model and screen size.
- Try long-pressing the "Back" button on the central knob to switch interfaces.
- Check if the car's original display is functioning correctly.
7.2. No Audio
- Confirm that the "Use original Bluetooth audio" setting is enabled in the module's audio settings.
- Ensure your phone is connected to the car's original Bluetooth (MB Bluetooth) and the audio source is selected on your phone.
- Check the volume levels on both your phone and the car's audio system.
7.3. Wireless Connection Issues (CarPlay/Android Auto)
- Ensure both Bluetooth and Wi-Fi are enabled on your smartphone.
- Forget the device from your phone's Bluetooth settings and try pairing again.
- Restart your smartphone and the car's infotainment system.
- Ensure the module's Wi-Fi antenna is properly connected.
7.4. Controls Not Responding
- Verify that the module is fully powered on and the interface is active.
- Ensure the correct control method (knob or steering wheel) is being used as described in Section 5.4.
- If issues persist, try resetting the module by long-pressing the right dial for 15 seconds (central knob) or the designated steering wheel button.
8. Specifications
| Feature | Description |
|---|---|
| Compatibility | Mercedes-Benz NTG 5.0 Systems (2015-2018) |
| Connectivity | Wireless & Wired CarPlay, Wireless & Wired Android Auto |
| Control | Utilizes original car central control knob and steering wheel buttons |
| Video Input | Supports aftermarket rear-view camera input |
| Dimensions (Module) | 13.6cm (L) x 7cm (W) x 2.2cm (H) |
| Audio Output | Integrates with car's original audio system via Bluetooth |
9. User Tips
- Installation Space: Some users have noted that fitting all the wires in the designated space can be tight. Take your time and carefully route the cables.
- Follow Instructions: The installation process is generally straightforward if the instructions, especially the wiring diagram and DIP switch settings, are followed accurately.
- Aesthetics: The module is designed to integrate without affecting the car's original aesthetics.
- Performance: Users report no noticeable lag, and the system operates smoothly.
- Parking Apps: Some parking applications may function correctly through CarPlay.
10. Frequently Asked Questions (FAQ)
Q: Is this module compatible with my Mercedes GLC 220 / GLC C253 2018 / GLC Coupe C253 2017?
A: Yes, if your GLC model (including GLC 220, GLC C253, GLC Coupe C253) is from the years 2015-2018 and is equipped with the NTG 5.0 system, it is compatible. Please refer to Section 2.2 to confirm your car's NTG system.
Q: Will it fit with the NGT 5.1 Command system for the GLC x253?
A: The module is primarily designed for NTG 5.0. While NTG 5.1 is a very similar system, please ensure your DIP switch settings are correctly configured for NTG 5.0/5.1 as per Section 4.1. If you encounter issues, please contact support.
11. Warranty and Support
For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or manufacturer's customer support. Keep your purchase receipt for warranty claims.