1. Introduction
This manual provides detailed instructions for setting up, operating, and maintaining your NINIVISION 4K 8MP WiFi PTZ IP Camera. Please read this guide thoroughly before use and retain it for future reference. Due to product updates, some details may vary slightly from the actual product.
This guide is applicable to various types of battery cameras, with some illustrations based on battery camera models.
2. Packing List
Please check the contents of your package. If any items are missing or damaged, contact customer support.
- Battery Camera x1
- Base x1
- Mounting Guide Sticker x1
- Charging Cable x1
- 3M Glue x1
- Quick Start Guide x1
- Screw Package x1
For Solar PT Camera / Battery Bullet Camera variants, additional items like a solar panel, solar panel mount, iron bracket, or hoop may be included.
3. Product Overview
3.1 Interface Description
The camera features a dual-lens design, offering comprehensive surveillance capabilities. Key components and dimensions are illustrated below:

Image: Front view of the camera showing dimensions (80mm width, 110.4mm height) and features like 4K UltraHD, 10x PTZ Zoom, Auto Tracking, Two Way Audio, Smart Color Night Vision, and EseeCloud APP compatibility.
- MIC: Microphone for audio input.
- Indicator Light: Provides status feedback (see LED Light Instructions below).
- Lens: Dual lenses for wide coverage and detailed zoom.
- Photosensitive: Light sensor for automatic day/night mode switching.
- Infrared & Spot Light: For night vision capabilities.
- Type-C Charging Port: For power input.
- SD Card Interface: For local storage (supports up to 128GB TF Card).
- Human Infrared Sensor (PIR): For motion detection.
- Reset Button: For device reset and power control.
- Speaker: For two-way audio output and alerts.
- Antenna: For wireless connectivity.
3.2 LED Light Instructions
- Green light flashes for 2s and goes out: Device is powered on and connecting to the network.
- Green light & Red light are always on: Camera is being previewed remotely (privacy light).
- Green light is always on: Device is connected to the network or awakened.
- Green light flashes continuously: Upgrading.
- Green light flashes continuously and slowly: Charging.
- Red light flashes 3 times quickly: Power off.
- Red light is always on: Low battery.
- Traffic light is always off: In standby mode.
3.3 Button Operation
For Single Button Model:
- Press and hold for 3s: Turn on.
- Press 3 times continuously: Power off.
- Press and hold for 5s (in power-on state): Reset.
For Two-Button Model:
- Press and hold the on/off button for 2s (when shutting down): Turn on.
- Press and hold the on/off button for 2s (when powering on): Power off.
- Press and hold the reset button for 3s: Reset.
4. Setup
4.1 Boot Up and Charging
Important: Please charge the device for 2 hours before initial use.
- When connecting to a router or using direct connection, insert the SD card *before* booting the device. If pairing with a wireless NVR, ensure the NVR's memory (SD card, HDD, etc.) is ready.
- If the app indicates a low battery or the camera shows a low battery warning, recharge the camera.
For Battery Camera: Press the power button for 2-3 seconds to turn on.
For Solar Dome Camera:
- Dial the camera switch to 'ON' to turn on.
- Connect the camera to the solar panel.
Note: If the device doesn't turn on after switching to ON, connect the solar panel and place it in sunlight for 1-2 hours, or use a household charger, then try again.
For Battery Bullet Camera: Press the button for 3 seconds to turn on.
Charging Notes:
- Use only the original battery and charger to avoid inaccurate power display or damage.
- Charge the battery at room temperature. Extreme temperatures can extend charging time and damage the battery.
4.2 APP Download and Installation
Scan the QR code below with your mobile phone to download and install the "EseeCloud" app. Follow the in-app prompts to complete user registration.
Download "EseeCloud" APP
System Requirements:
- iOS: Version 9.0 or above.
- Android: Version 5.1 or above.
4.3 Adding Device to APP
The battery camera supports three connection modes:
- Remote view by connecting to the router: The camera's WiFi connects to your home router. Video is stored on the camera's SD card or Cloud.
- Local direct connection: Your mobile phone's WiFi connects directly to the camera. Video is stored only on the camera's SD card. Remote viewing is not possible in this mode.
- Pairing to a wireless NVR (WiFi/4G Base station, WNVR, Tablet): Video is stored on the NVR. You can remotely view and set up the camera via the NVR using your mobile phone.
4.3.1 Adding a WIFI Camera (Method 1: Scanning QR Code)
- Place your mobile phone and camera near the router (30-100cm distance).
- Connect the device to power.
- Log in to the "EseeCloud" APP, enable Bluetooth on your phone, and click the add button to enter the automatic search interface.
- Select the device you want to add and click "Add". Follow the interface guidance.
- If the device is not found after 10s, click "Scan to add" to scan the QR code on the device body.
- After the battery camera powers on, it will prompt "start match code" and the red LED will flash. If not, press the RESET button for 8 seconds until you hear "reset successfully".
4.3.2 Adding a 4G Camera (Method 2: Direct Connection)
- Connect the device to power.
- On the automatic search interface, click "Scan to add" to enter the scan code interface.
- Scan the QR code on the device body and add the device according to the interface guidance.
4.3.3 Adding to Wireless NVR
- Power on the WNVR (base station, network hard disk recorder, or touch screen) and connect it to the internet via WLAN.
- Open the APP and click the '+' icon to enter the scan code interface.
- Scan the ID QR code on the wireless NVR body or screen. Add the device following the APP's simple setup. The paired camera will appear in the device list.
4.4 Installation and Placement
Proper installation ensures optimal performance and coverage.
4.4.1 Battery Camera
- Desktop Placement: Simply place the camera on a flat surface like a desk or table.
- Wall/Glass Mounting:
a. Fix the mounting guide sticker to the wall using 3M glue (for smooth surfaces like glass) or screws (for brick walls).
b. Place the magnetic base of the battery camera onto the iron sheet and adjust the angle as needed.
4.4.2 Solar PT Camera
Can be installed on ceilings, walls, or poles.
- Ceiling/Wall Installation:
a. Use the installation positioning paper to drill holes. For concrete walls, use rubber plugs.
b. Install the camera base.
c. Install the solar holder.
d. Install the solar panel outdoors and connect it to the camera. - Pole Installation:
a. Fix the iron plate behind the battery compartment of the camera with screws.
b. Install the camera on the pole using the provided hoop.
c. Install the solar holder.
d. Install the solar panel outdoors and connect it to the camera.
4.4.3 Battery Bullet Camera
- Use the mounting sticker to mark and drill holes. For concrete walls, use rubber plugs.
- Fix the camera case with screws.
- Adjust the camera's pitch angle to a proper position and tighten the fixing screws.
- The camera can be charged with solar panels (if applicable).
PIR Sensor Installation Notes:
- Avoid installing the camera where airflow is agitated (e.g., near air conditioner outlets, heat dissipation ports, fans, curtains).
- Do not install the camera in front of glass or mirrors.
- Optimal installation height is 2.5M-3M for best PIR trigger distance.
- Do not install the camera upside down.
5. Operating Instructions
5.1 Two-Way Audio
The camera features a built-in microphone and speaker, allowing for real-time two-way audio communication. This enables you to speak through the camera and hear responses from the monitored area.

Image: Demonstrates two-way audio functionality, showing a person at the door and a user communicating via the app.
Video: A short product overview demonstrating features like two-way audio, PTZ control, auto tracking, motion detection, and full-color night vision.
5.2 PTZ Control by APP
The camera supports Pan-Tilt-Zoom (PTZ) functionality, allowing you to remotely control its viewing angle. It rotates 355° horizontally and 90° vertically.

Image: Illustrates PTZ control via the app, showing the camera panning and tilting to cover a wide area, including a road and buildings.
You can control the camera's movement directly within the EseeCloud app, anytime and anywhere. For devices supporting zoom, you can adjust the focal length and magnification speed by sliding the zoom axis or using a two-finger pinch gesture in the video area.
5.3 AI Auto Tracking
The smart tracking function enables the camera to automatically follow moving objects within its field of view. When someone passes through the alarm area, the camera will detect their movement and track them.

Image: Shows the AI Auto Tracking feature, where the camera identifies and follows a person moving within a room.
5.4 Motion Detection & E-mail Alert
You can set up specific areas for motion detection. When motion is triggered in these areas, the camera will send a message to your email, providing you with first-hand information regardless of your location.

Image: Depicts motion detection in action, showing a masked individual in a monitored area, triggering an alarm and a mobile notification.
5.5 Full Color Night Vision
Equipped with built-in White LED and IR LED, the camera offers flexible night vision options. You can choose between full-color night vision or traditional infrared black and white night vision.

Image: Illustrates the full-color night vision capability, showing a clear, color-rich view of a city street at night.
5.6 P2P Remote Access
Thanks to convenient P2P technology, you can view live footage from your camera anytime, anywhere. Simply log in to the EseeCloud app on your smartphone or tablet to start monitoring your home.

Image: Shows the P2P remote access feature, allowing users to view live camera feeds on their iPhone or Android devices from anywhere in the world.
5.7 TF Card & Cloud Storage
The camera supports both external SD card storage and cloud services. It features an external SD card slot for easy insertion and supports up to 128GB Micro SD cards (not included). Cloud storage options are also available.

Image: Displays the TF Card and Cloud Storage options, showing icons for cloud storage, SD card, and a timeline of recorded events.
6. SIM Card Network Description (for 4G Camera)
6.1 SIM Card Distribution Network
- Open the EseeCloud APP and click "Add Device".
- Scan the QR code on the device body to identify the device type.
- Insert the SIM card and open the device. Check the device indicator status according to instructions and click "Next".
- Enter the distribution network details and wait for successful distribution.
- The app will show successful device addition. Modify the device name and complete the process.
6.2 SIM Card APN Distribution Network
If the initial distribution network fails or times out, you can use APN distribution network settings:
- When the device distribution network fails, navigate to the "Configuration Network Failure" page. Confirm that "Use entity SIM card" is selected under SIM card networking.
- Enter the "Physical SIM Card help" page to confirm SIM card status and select "APN Settings".
- Obtain the SIM card APN information from your SIM card instructions or by contacting your SIM card provider's customer service.
- Enter the corresponding APN information and click "Next".
- Restart the device (ensure it enters scanning state). Restart and click "Next Step" to generate a QR code.
- Scan the QR code on the device screen to enable the device SIM card to obtain the configured APN information. The device should broadcast a prompt sound indicating successful code scanning. Click "Next Step".
- Enter the distribution network details and wait for successful distribution.
- The device will be added successfully. Modify the device name and complete the process.
APN Enable Shortcut: If you need to configure APN for the device SIM card, you can access this option from the boot FAQ page.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | NINIVISION |
| Model Number | NI-WIFI1-CAM01 |
| Megapixels | 8MP |
| High Definition | 8.0 Megapixels |
| Lens Quantity | Dual Lens |
| Lens (mm) | 3.6mm |
| Zoom Type | Optical zoom |
| Zoom | 10X |
| Digital Zoom | 8x |
| Viewing Angle | 360° |
| Pan & Tilt Lens Angle | 0~355° Pan & 0~90° Tilt |
| Movement Range (Pan) | 0°-360° |
| Connectivity | IP/Network Wireless |
| AI Functions | Smart Tracking, Human Detection, Auto Tracking |
| Color Night Vision | Yes (Dual Light Full-Color) |
| IR Distance (m) | 30m-50m Distance |
| Minimum Illumination (Lux) | 0.001Lux |
| Audio Output | Two Way Audio (Built-in Mic & Speaker) |
| Video Compression Format | H.264, H.265 |
| Frame Rate | Up to 15 fps |
| TF Card | 128G TF Card (Up to 128GB Micro SD Card Slot) |
| Internal Storage | 128G |
| Power Supply | Normal (DC 5V) |
| Power Consumption (W) | <3W |
| Operating Temperature | -10°C to 60°C |
| Shell Material | Plastic |
| Dimensions (L x W x D)(mm) | 80*80*110.4mm (3.15*3.15*4.35inch) |
| Installation | Normal (Indoor and outdoor) |
| Supported Mobile Systems | Android, iOS |
| Supported Operating Systems | Windows 7, Windows 10 |
| Alarm Action | FTP Photo, Email Photo, Local Alarm |
| Certification | CE, FCC |
8. User Tips
- For optimal performance, ensure a strong and stable Wi-Fi connection, especially for remote viewing and cloud storage.
- Regularly check the camera's battery level via the EseeCloud app to ensure continuous operation.
- When setting up motion detection, carefully define the alarm areas to minimize false alerts.
- Consider using a high-quality Micro SD card for reliable local video storage.
9. Troubleshooting
9.1 Common Issues
- Indicator light not flashing or always on during boot: Refer to the common problems section in the device boot guide page within the EseeCloud app for specific guidance.
- Device not found during APP setup: Ensure the camera is powered on, within range of your phone/router, and that Bluetooth is enabled on your phone. Try scanning the QR code directly.
- SIM card network issues (for 4G camera): If the distribution network fails, try the APN distribution network method as described in section 6.2.
9.2 Important Warnings
- Do not place the product in damp or rainy environments to prevent fire or lightning hazards.
- Operate and maintain the device strictly according to this user manual.
- Be cautious of dangerous voltages, which can cause serious electrical accidents.
- Ensure proper ventilation and avoid covering the camera to prevent overheating.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format is available for download:
Please ensure you have your product model number (NI-WIFI1-CAM01) and purchase details ready when seeking support.