ludengchaoshi Circular Enclosed 360 Degree Moving Head Fan Light

Contents

Circular Enclosed 360 Degree Moving Head Fan Light

Model: Circular Enclosed 360 Degree Moving Head Fan Light

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your new Circular Enclosed 360 Degree Moving Head Fan Light. Please read this manual thoroughly before installation and retain it for future reference.

Important Safety Information

  • Always turn off the main power supply before installation, maintenance, or cleaning to prevent electric shock.
  • Installation should be performed by a qualified electrician to ensure safety and proper function.
  • Ensure all connections are secure and correctly wired to avoid product malfunction or fire.
  • Do not operate the fan light if any part is damaged.
  • Keep children away from the installation area.

Installation Guide

Warm reminder: Please entrust an electrician to install the lamp. Before installation, please check the lamp installation accessories, instructions, and accessory kit. Before installation, power on to test whether the lamp is normal. Before attempting to light up, you must first cut off the power supply.

Installation diagram for the fan light
Figure 1: Installation Diagram
  1. Step 1: Install the chassis at the ceiling reinforcement

    Use self-tapping screws to install the chassis on the ceiling. Ensure it is firmly installed to prevent the lamp from falling, which could cause damage or personal injury.

  2. Step 2: Connect the electric wire

    Connect the zero line and the live line to the power input line of the corresponding lamp. Improper connection can easily cause accidents such as product blackout or fire. To ensure safety, be sure to turn off the main power switch before connecting the power line.

  3. Step 3: Install the lamp panel

    Insert the ceiling tray upward into the chassis, then rotate it to clamp the lamp tray. Improper installation may cause the lamp panel to fall off.

  4. Step 4: Tighten the four fixing screws

    Use a screwdriver to strengthen the fixing force between the chassis and the lamp plate by tightening the four fixing screws.

Operation Instructions

Your fan light is equipped with a remote control for convenient operation of both the fan and lighting functions.

Diagram showing the fan light with remote control and key features
Figure 2: Fan Light with Remote Control and Features

Lighting Control (3CCT)

The fan light features 3CCT (Correlated Color Temperature) functionality, allowing you to switch between different light colors to suit your mood or activity. Use the remote control to cycle through the available color temperatures:

  • Warm Light (3000K): Ideal for relaxation and creating a cozy atmosphere.
  • Neutral Light (4000K): Suitable for general illumination and daily activities.
  • Cool White Light (6000K): Best for tasks requiring focus and bright illumination.
Images showing the fan light at 4000K, 6000K, and 3000K color temperatures
Figure 3: 3CCT Color Temperature Options

Fan Control

The fan features a 360-degree moving head design, ensuring wider air circulation. Use the remote control to:

  • Turn the fan ON/OFF.
  • Adjust fan speed (if multiple speeds are available).
  • Activate/deactivate the 360-degree shaking head function. The enclosed design ensures safety as fan blades are not exposed.
Diagram illustrating the 360-degree shaking head fan with enclosed blades and airflow
Figure 4: 360-degree Shaking Head Fan Mechanism

Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your fan light.

  • Cleaning: Before cleaning, always ensure the power supply to the fan light is turned off. Use a soft, dry cloth to wipe the exterior surfaces. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
  • Fan Blades: Due to the enclosed design, direct cleaning of the fan blades is not typically required. If dust accumulates, use a soft brush or vacuum cleaner with a brush attachment to gently remove it from the grilles.
  • Bulb Replacement: The light source consists of integrated LED modules (LED 36W*2). These are designed for long life and are generally not user-replaceable. If the LEDs fail, professional service may be required.

Troubleshooting

If you encounter issues with your fan light, refer to the following common problems and solutions:

Problem Possible Cause Solution
Light does not turn on
  • No power supply.
  • Loose wiring connection.
  • Remote control batteries are dead.
  • Check the main power switch and circuit breaker.
  • Verify all wiring connections are secure (consult an electrician if unsure).
  • Replace remote control batteries.
Fan does not operate
  • No power supply to the fan motor.
  • Remote control batteries are dead.
  • Fan motor malfunction.
  • Check power supply.
  • Replace remote control batteries.
  • Contact customer support for assistance.
Remote control not responding
  • Dead batteries.
  • Obstruction between remote and receiver.
  • Remote not paired (if applicable).
  • Replace batteries.
  • Ensure a clear line of sight.
  • Refer to the full user manual (PDF) for pairing instructions if needed.

Specifications

Feature Detail
Brand Name ludengchaoshi
Item Type Ceiling Fans
Style Modern Style
Installation Method Assembly
Control Method REMOTE CONTROL
Switch Type REMOTE CONTROL
Power Source AC
Voltage 85-265V
Motor Power 15-20W
Light Source LED 36W*2 (Bulbs Included)
Luminous Flux 2000-82000
Color Temperature (CCT) 3000K (Warm), 4000K (Neutral), 6000K (Cool White)
Material Iron + Acrylic
Lamp Body Diameter 49cm
Lamp Height 21cm
Applicable Space 10-15m²
Certification CE, ROHS
Batteries Included No (for remote control)
Origin Mainland China

User Tips

  • The enclosed design of the fan blades provides enhanced safety, especially in homes with children or pets.
  • Experiment with the 3CCT lighting options to find the perfect ambiance for different times of day or activities in your living room, bedroom, or dining room.
  • Utilize the remote control for maximum convenience, adjusting light and fan settings from anywhere in the room.

Warranty and Support

For detailed product guides and documents, including comprehensive wiring diagrams and advanced troubleshooting, please refer to the official user manual PDF:

View User Manual (PDF)

If you require further assistance or have questions not covered in this manual, please contact the seller or manufacturer's customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.