Tinsol X9

Contents

Tinsol X9 6-in-1 Detachable Hair Styler User Manual

Model: X9 | Brand: Tinsol

Important Safety Instructions

Before using this product, please read all instructions and warnings in this manual and on the product. When using electrical appliances, you should always observe the basic precautions, including the following:

WARNING

  • Stay away from Pacemakers, defibrillators, credit cards, and electronic storage media.
  • To reduce the risk of fire, electric shock and injury.

General Warnings

  • This product cannot be used by persons with physical, sensory or intellectual disabilities and persons without relevant experience and knowledge (including children) unless supervised or directed by a guardian to ensure safe use of the product.
  • Please do not use this product as a toy. This is especially important when used by or near children. Take care of children and make sure they do not use this product as a toy.
  • If this product is used in the bathroom, please unplug it after use. Even if this product is closed, access to water can be dangerous.
  • Do not use in bath, bath, wash basin or other water container accessories.
  • In case the power cord is damaged, it must be replaced or repaired by the manufacturer, its service agent or qualified personnel.
  • This product is equipped with a non-self-reset thermal safety cut-off device, used to prevent overheating. If the product is cut off, please pull the plug from the main power socket to reset.
  • In order to avoid the risk of accidental reset due to hot cut-off, this product shall not be powered by external switch devices such as timers, meters, etc. It shall not be connected to a circuit that is opened and closed at regular intervals by a utility company.
  • Do not plug into any outlet where the power is unstable or may be turned off.
  • To provide additional protection, it is recommended that a residual-current device be installed with a rated leakage current not exceeding 3 mA. Please seek the advice of the installer.
  • Please do not use this product for any purpose other than dry hair.
  • Do not touch the plug or any part of the product with wet hands.
  • Do not pull the cable when drawing the power supply. To pull the plug, hold the plug instead of the cable. It is not recommended to use extension cables.
  • Do not pull or heavy-duty power cord. Keep the power cord away from the heated surface. Do not wind the power cord around the product.
  • Do not use any lubricants, detergents, polishes or air freshener on any parts of this product.
  • Please contact customer service if maintenance or repair is required. Please do not disassemble the product. Improper disassembly operation may cause electric shock or fire.
  • If the product does not operate as designed, is severely impacted, falls or is damaged from a height, is placed outdoors or in water, do not use and contact customer service.

Note: Exhaust port and Metal Ring may be hot. Exercise caution before touching.

Product Overview

The Tinsol X9 is a versatile 6-in-1 detachable hair styler designed to help you achieve various hairstyles at home. It features intelligent temperature control and a powerful digital motor to protect your hair from thermal damage while providing efficient styling.

Tinsol X9 6-in-1 Detachable Hair Styler with all attachments

Figure 1: Tinsol X9 6-in-1 Detachable Hair Styler and its various attachments.

Included Attachments:

  • Curling Drums (40mm and 30mm): For creating curls and waves in both clockwise and counterclockwise directions.
  • Smooth Comb: For achieving smooth and straight hair.
  • Anti-flying and Drying Hair Nozzle: For quick drying, smoothing, and taming flyaways.
  • Cylindrical Comb: For adding volume and creating fluffy styles.

Specifications

Attribute Value
Model Number X9
Brand Name Tinsol
Item Type Hair Dryer
Power Source Electric
Voltage 210-240V
Max. Power 1300W
Heating Element Infrared
Type of Motor AC
Number of Gears 3
Number of Nozzles 3 - 4 (depending on configuration)
Material ABS
Portability Unfoldable handle
Function Anion, Thermostatic, Hot/cold air, Temperature control
Plug Standard EU (other options like UK, KR may be available)
Certification RoHS, CE
Use Professional
Origin Mainland China

Note: This device is designed for 210-240V. Please ensure compatibility with your local power supply. For 110V regions, a voltage converter may be required.

Setup and Assembly

Your Tinsol X9 hair styler comes with several detachable attachments for various styling needs. Follow these steps to assemble and prepare your device for use.

Unboxing and Initial Inspection

Unboxing the Tinsol X9 hair styler and its components

Figure 2: Contents of the Tinsol X9 package, including the main unit and various attachments.

Carefully remove all components from the packaging. Inspect the main unit and all attachments for any signs of damage. If any part is damaged, do not use the device and contact customer service.

Attaching and Detaching Accessories

The styling accessories are designed for easy attachment and detachment. Gently rotate the reel to easily control the airflow and secure the attachments.

Diagram showing how to attach and detach styling accessories

Figure 3: Illustration of attaching and detaching styling accessories.

  • To attach an accessory, align it with the main unit and gently twist until it clicks into place.
  • To detach, twist in the opposite direction and pull the accessory off.
  • For the Anti-flying and Drying Hair Nozzle, ensure the arrow is pointing in the correct position to avoid blockage of the vent.

Operating Instructions

Familiarize yourself with the controls and functions of your Tinsol X9 hair styler before use.

Power and Settings

Diagram of power switch, temperature, and wind speed settings

Figure 4: Power switch, temperature, and wind speed controls.

  • Power Switch: Use the main power switch to turn the device ON/OFF.
  • Temperature Settings: Select from High temperature, Medium temperature, or Cold air.
  • Wind Speed Settings: Choose between Fast, Medium speed, or Mild.
  • One-Click Cold Air: A dedicated button for instant cold air.

Using the Attachments

The Tinsol X9 utilizes intelligent temperature control technology to prevent irreversible thermal damage to your hair, combined with a digital motor for precise and strong airflow.

Diagram illustrating intelligent temperature control and digital motor technology

Figure 5: Intelligent temperature control and digital motor for efficient and safe styling.

  • Curling Drums (40mm and 30mm):
    Curling drum in use for creating curls

    Figure 6: Hair being styled with the curling drum attachment.

    The newly upgraded drums are suitable for both front and back curly hair. You can curl your hair in both clockwise and counterclockwise directions without the need to change the roll. This design allows you to create a fuller curl and wavy look faster, styling up to 50% more hair each time and quickly completing long hair styling.

  • Smooth Comb:
    Smooth comb attachment in use for straightening hair

    Figure 7: Using the smooth comb attachment to create straight hair.

    The newly designed smooth comb provides enhanced control of the Kangda effect airflow, making it easier to adsorb hair. This allows for faster drying and shaping, making it easy to create smooth and straight hair.

  • Anti-flying and Drying Hair Nozzle:

    This nozzle offers multiple functions including drying, smoothing, and taming flyaways. In dry hair mode, it blows out a concentrated DC airflow to quickly dry hair and prepare it for styling.

  • Cylindrical Comb:

    Wrap your hair around the cylindrical comb to create a fluffy, voluminous effect.

The device is designed to complete styling from wet to dry, reducing dependence on high temperatures by utilizing strong airflow. This helps maintain hair strength and moisture, resulting in a glossy appearance.

Diagram showing benefits of wet to dry styling for hair health

Figure 8: Benefits of the Tinsol X9's styling approach on hair health, reducing damage and maintaining moisture.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the lifespan of your Tinsol X9 hair styler.

Diagram showing how to clean the filter and detach parts

Figure 9: Cleaning instructions for the filter and main unit.

  1. Disconnect the styler from the handle. Note: The styler cannot be completely removed due to the connection between the power cord and the plug.
  2. Use a soft brush to remove dust and debris from the filter.
  3. To reattach the filter cover, align the red dot on the filter with the white dot on the handle and press the two buttons together until it clicks securely.

Tip: Please clean the filter once a week to once a month, depending on usage, to maintain optimal airflow and performance.

Troubleshooting

If you encounter any issues with your Tinsol X9 hair styler, refer to the following common problems and solutions:

  • Device stops working (thermal cut-off): If the product is cut off due to overheating, pull the plug from the main power socket to reset the thermal safety cut-off device. Allow it to cool down before resuming use.
  • Blocked airflow or improper function of Anti-flying nozzle: Ensure the arrow on the Anti-flying and Drying Hair Nozzle is pointing in the correct position. Incorrect positioning can lead to blockage of the vent and prevent normal operation.
  • General malfunction or damage: If the product does not operate as designed, is severely impacted, falls, is damaged from a height, or is exposed to water, discontinue use immediately. Contact customer service for assistance. Do not attempt to disassemble or repair the product yourself.

User Tips

  • Utilize Temperature Control: The device offers multiple temperature settings (High, Medium, Cold Air). Experiment to find the optimal heat level for your hair type to prevent damage and achieve desired results.
  • Efficient for Thick Hair: Users with thick, medium-length hair have reported quick styling times, sometimes as fast as 8 minutes for a full style.
  • Handle Attachments with Care: While the attachments are designed for durability, gentle handling during assembly and use can prevent accidental damage.
  • Mind the Cord Weight: The power cord is robust but can be heavy. Be mindful of its weight during prolonged styling sessions to avoid fatigue.
  • Check Plug Compatibility: The device operates on 210-240V and comes with various plug types (EU, UK, KR). Ensure you select the correct plug for your region. If your region uses 110V, a suitable voltage converter is necessary.

Warranty and Support

For detailed warranty information and customer support, please refer to the official documentation provided with your product. In case of any operational issues or if you require assistance, please contact Tinsol customer service.

A comprehensive user manual in PDF format is available for download or viewing. You can access the Tinsol X9 User Manual (PDF) for additional guides and documents.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.