1. Product Introduction
This product is a convex auxiliary rear-view mirror, designed to expand the field of vision of the original vehicle rear-view mirror, effectively reduce blind spots, and assist drivers in observing the situation of rear and side vehicles, pedestrians, and road edges, improving driving safety, especially suitable for lane changes and reverse parking. The product is made of high-transparency glass, with strong adhesion and easy installation, suitable for most vehicle rear-view mirrors. It complies with the relevant requirements of EU vehicle rear-view mirror regulations and GPSR regulations.
2. Safety Information and Warnings
This product complies with EU RoHS and REACH environmental directives. Materials meet EU road traffic safety warning product standards, making it suitable for road use scenarios in the EU market.
WARNING:
- This product is an auxiliary rear-view mirror, not a substitute for the original vehicle rear-view mirror.
- Improper installation or use may cause visual distortion and increase the risk of traffic accidents.
- Do not rely solely on this product when changing lanes or reversing. Always check the surrounding environment through shoulder observation.
- Keep away from high temperature and open flames.
- Avoid direct sunlight for a long time to prevent adhesive failure.
- This product contains small parts, which may cause choking hazard. Not suitable for children under 3 years old.
3. Specifications
| Feature | Detail |
|---|---|
| Product Name | Car auxiliary mirror |
| Model | 1 |
| Brand | Fccemc |
| Item Type | Mirror & Covers |
| Origin | Mainland China |
| Material | High-transparency glass |
| Dimensions (L x W x H) | 6.3cm x 4cm x 1.7cm (2.48in x 1.57in x 0.66in) |
| Weight | 0.071 kg (per pair) |
| Quantity | 2 pieces per package |
| Adjustability | 360° spherical design |
| Adhesion | Strong, large area contact adhesive |
4. Installation Steps
- Clean the surface: Clean the installation position on the original rear-view mirror with a clean cloth. Ensure there is no dust, oil stain, or water stain, and keep the surface dry.
- Apply the mirror: Tear off the protective film on the back of the auxiliary mirror. Align it with the desired position. It is recommended to paste it on the outer edge of the rear-view mirror to avoid blocking the main field of vision. For the left rear-view mirror, paste it on the upper left corner. For the right rear-view mirror, paste it on the lower left corner. Press firmly for 30-60 seconds to ensure full adhesion.
- Adjust the angle: After installation, adjust the angle of the auxiliary mirror according to your driving habits, so that it can clearly display the blind spot area, forming a complementary view with the original rear-view mirror.
5. Correct Usage
- This product is an auxiliary tool and cannot replace the original rear-view mirror. Always primarily use your vehicle's main rear-view mirror.
- When changing lanes, reversing, or turning, do not rely solely on this product. Always perform shoulder checks and observe the surrounding environment to prevent accidents due to visual distortion from the convex mirror.
- Be aware that the convex mirror may cause some distance distortion. Exercise caution and judgment when assessing the actual distance of vehicles behind you.
6. Maintenance and Attention
- Check adhesion: Regularly check the adhesion of the auxiliary mirror. If it becomes loose or falls off, re-clean the surface and re-apply it.
- Avoid scratches: Do not scratch the mirror surface with sharp objects to prevent affecting the viewing effect.
- Environmental conditions: Do not use the product in extreme environments (such as temperatures higher than 80°C or lower than -20°C) to prevent aging of the adhesive and damage to the mirror surface.
- Child safety: Keep the product away from children to avoid choking hazards caused by small parts falling off.
- Disassembly: This product does not require professional disassembly. If removal is necessary, gently tear it off from the edge and clean any residual adhesive with a cleaning agent.
7. Troubleshooting
No specific troubleshooting steps are provided for this product. If you encounter issues not covered in the maintenance section, please refer to the contact information for support.
- Mirror not adhering properly: Re-clean the surface thoroughly and re-apply, ensuring firm pressure for 30-60 seconds.
- Visual distortion: This is inherent to convex mirrors. Adjust the angle to find the most useful view, but always cross-reference with your main mirrors and shoulder checks.
8. User Tips
- For optimal safety, always use this auxiliary mirror in conjunction with your vehicle's primary mirrors and physical head checks, especially during lane changes and reversing.
- Consider installing the mirror in a position that maximizes blind spot coverage without obstructing your main rear-view mirror's field of vision.
9. Manufacturer and Support Information
Manufacturer:
Guangzhou Zhengji Information Technology Co., Ltd
Address: Room 311, Building 2, Jiahe Creative Industry Park, Huangbian North Road, Baiyun District, Guangzhou City, Guangdong Province, China, 510440
Tel: 86-13535102100
E-mail: zj634216187@163.com
EU Authorized Representative:
Apex CE Specialists GmbH
Grafenberger Allee 277, 40237 Dusseldorf, DE
E-mail: Info@apex-ce.com
Tel: +49 21312066043
For further assistance or to view the original user manual in PDF format, please refer to the official documentation provided by the seller.