Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your NINIVISION 4K 8MP WiFi PTZ IP Camera. Please read this guide thoroughly before using the product to ensure proper functionality and safety. Keep this manual for future reference.
1. Setup
1.1 Packing List
- Battery Camera x1
- Base x1
- Mounting Guide Sticker x1
- Charging Cable x1
- Quick Start Guide x1
- Screw Package x1
- Solar Panel x1 (for Solar PT Camera/Battery Bullet Camera variants)
- Solar Panel Mount x1 (for Solar PT Camera variant)
- Iron Bracket x1 (for Solar PT Camera variant)
- Hoop x2 (for Solar PT Camera variant)
1.2 Interface Description
Familiarize yourself with the camera's components:

Battery Camera:
- Lens: Captures video footage.
- MIC: Built-in microphone for audio input.
- Indicator Light: Shows device status.
- Photosensitive: Light sensor.
- Infrared & Spot Light: For night vision.
- Type-C Charging Port: For power input.
- SD Card Interface: For local storage.
- Human Infrared Sensor (PIR): Detects motion.
- Reset Button: For resetting the device.
- Speaker: For audio output.
Button Operation (Single Button Model):
- Press and hold the reset button for 3 seconds: Turn on.
- Press the reset button 3 times continuously: Power off.
- Press and hold the reset button for 5 seconds in the power-on state: Reset.
Button Operation (Two-Button Model):
- Press and hold the on/off button for 2 seconds when shutting down: Turn on.
- Press and hold the on/off button for 2 seconds when powering on: Power off.
- Press and hold the reset button for 3 seconds: Reset.
LED Light Instructions:
- Green light flashes for 2s and goes out: Device is powered on and connecting to the network.
- Green light red light is always on: Camera is being previewed remotely (privacy light).
- Green light is always on: Device is connected to the network or awakened.
- Green light flashes continuously: Upgrading.
- Green light flashes continuously and slowly: Charging.
- Red light flashes 3 times quickly: Power off.
- Red light is always on: Low battery.
- Traffic light is always off: In standby.
1.3 Boot Up and Charging Instructions
Important: Please charge the device for 2 hours before initial use.
Battery Camera: Press the power button for 2-3 seconds to turn on.
Solar Dome Camera:
- Dial the camera switch to 'ON'.
- Connect the camera to the solar panel.
Reminder: If the device does not turn on after switching to ON, place the solar panel in sunlight for 1-2 hours to charge, or use a household charger.
Battery Bullet Camera: Press the button for 3 seconds to turn on.
Note on Charging: Use the original battery and charger. Using other batteries may result in inaccurate power display and damage. Charge at room temperature to avoid affecting battery life.
1.4 APP Download and Installation
Scan the QR code below with your mobile phone to download and install the "EseeCloud" APP. Follow the in-app prompts to complete user registration.
(QR code for EseeCloud APP download)
- iOS System: Requires iOS 9.0 or above.
- Android System: Requires Android 5.1 or above.
1.5 Adding the Device
Adding Method 1: Scanning QR Code (for network and local direct connection)
- Place your mobile phone and camera within 30-100cm of the router.
- After powering on the battery camera, listen for the voice prompt "start match code" and observe the red LED light flashing. If not, press the RESET button for 8 seconds until "reset successfully" is heard.
- Log in to the "Eseecloud" APP, enable Bluetooth on your phone, and click the add button to enter the automatic search device interface.
- Select the device to add, click "Add", and follow the APP prompts.
Adding Method 2: Direct Connection through Mobile Phone
When using in local direct connecting mode, your mobile phone's WiFi should be connected to the camera's own WiFi. Video can only be stored on the camera's SD card, and remote viewing is not possible.
Adding Method 3: Pairing to Wireless NVR (WiFi/4G Base station, WNVR, Tablet)
- Power on the wireless NVR and connect it to the internet.
- Open the APP and click the add button in the upper right corner to enter the scan code interface.
- Scan the ID QR code on the wireless NVR body or screen. The camera paired to the wireless NVR will be directly displayed in the device list.
4G Camera Specifics:
- Connect the device to power.
- On the automatic search interface, click "Scan to add" to enter the scan code interface.
- Scan the QR code on the device body and add the device according to the interface guidance.
1.6 Installation and Placement
Battery Camera:
- Desktop Placement: Simply place on a flat surface.
- Wall/Glass Mounting: Use the mounting guide sticker to mark holes. For smooth surfaces like glass, use 3M glue. For brick walls, use screws. Attach the magnetic base to the iron sheet and adjust the angle.
Solar PT Camera:
- Ceiling/Wall Installation: Use the positioning sticker to drill holes. Secure the camera base and solar holder. Connect the solar panel (installed outdoors) to the camera.
- Pole Installation: Fix the iron plate behind the battery compartment with screws. Install the camera on the pole using the hoop. Connect the solar panel (installed outdoors) to the camera.
Battery Bullet Camera:
- Use the mounting sticker to locate and drill holes. Fix the case with screws. Adjust the camera's pitch angle. The camera can also be charged with solar panels.
PIR Sensor Installation Notes:
- Avoid installing where air flow is agitated (e.g., AC outlets, fan sides, near curtains).
- Do not install in front of glass or mirrors.
- Optimal installation height: 2.5m - 3m for best PIR trigger distance.
- Do not install the camera upside down.
1.7 SIM Card Distribution Network (for 4G Camera)
Standard Setup:
- Open EseeCloud APP and click Add Device.
- Scan the device body QR code to identify the device type.
- Insert the SIM card and open the device. Check indicator status and click Next.
- Enter the distribution network and wait for successful connection.
- Modify the device name to complete addition.
APN Distribution Network (if standard setup fails):
- If the distribution network fails, confirm "Use entity SIM card" is selected.
- Go to the Physical SIM Card help page, confirm SIM card status, and select APN Settings.
- Obtain APN information from SIM card instructions or customer service.
- Enter APN information and click Next.
- Restart the device (to enter scanning state), then click Next to generate a QR code.
- Scan the QR code on the screen with the device to enable the SIM card to obtain APN info.
- Wait for the distribution network to succeed.
- Modify the device name to complete addition.
2. Operating Instructions
2.1 Two-Way Audio
The camera features real-time two-way audio with a built-in microphone and speaker, allowing you to communicate through the camera.

Video Demonstration:
Description: This video segment demonstrates the two-way audio functionality, showing a user communicating remotely through the camera.
2.2 PTZ Control by APP
The camera supports 355° horizontal rotation (Pan) and 90° vertical rotation (Tilt). You can control the camera's movement directly from the EseeCloud APP, anytime and anywhere.
Video Demonstration:
Description: This video segment illustrates how to control the camera's pan and tilt movements using the mobile application.
2.3 AI Auto Tracking
The Smart Tracking function enables the camera to automatically detect and follow moving objects within its field of view.

Video Demonstration:
Description: This video segment shows the AI auto-tracking feature in action, where the camera follows a person moving across the room.
2.4 Motion Detection & E-mail Alert
You can define specific areas for motion detection. When motion is triggered, the camera will send a message to your email, providing real-time information regardless of your location.

Video Demonstration:
Description: This video segment demonstrates the motion detection and email alert system, showing how the camera identifies an intruder and sends a notification.
2.5 Full Color Night Vision
Equipped with built-in White LED and IR LED, you can choose between full-color night vision or infrared black and white night vision modes.
Video Demonstration:
Description: This video segment showcases the camera's full-color night vision capability in a low-light urban environment.
2.6 P2P Remote Access
Thanks to convenient P2P technology, you can view live footage by logging into your EseeCloud APP account via your smartphone or tablet, allowing you to monitor your home remotely.

2.7 TF Card & Cloud Storage
The camera supports an external SD card slot for easy and convenient local storage (up to 128GB Micro SD card, not included). Cloud services are also supported for additional storage options.

3. Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera lens and body. Avoid using harsh chemicals or abrasive cleaners.
- Firmware Updates: Regularly check the EseeCloud APP for available firmware updates to ensure optimal performance and security.
- Environmental Conditions: Ensure the camera operates within the specified temperature range (-10°C to 60°C) and humidity levels to prevent damage.
- Cable Management: Ensure all cables are securely connected and protected from environmental factors or physical damage.
4. Troubleshooting
4.1 Common Issues
- Indicator Light Not Flashing/Always On During Boot: If the indicator light does not behave as expected during the boot process, refer to the "Exceptional case" section in the APP's boot guide FAQ page for specific guidance.
- Network Connection Issues: Ensure the camera is within range of your Wi-Fi router or has a strong 4G signal. Verify Wi-Fi credentials in the APP.
- Poor Video Quality: Check the camera lens for dirt or obstructions. Ensure adequate lighting, especially for night vision.
- Motion Detection Not Working: Verify motion detection settings in the APP, including detection zones and sensitivity. Ensure the PIR sensor is not obstructed.
- Two-Way Audio Problems: Check microphone and speaker settings in the APP. Ensure there is no interference or excessive background noise.
4.2 Warnings
- In case of fire or lightning, do not place the product in damp or rainy areas.
- Operate and maintain the device strictly according to this user manual.
- Be cautious of dangerous voltage, which may cause serious electrical accidents.
- Do not exceed the specified temperature, humidity, and voltage ranges.
5. Specifications
| Attribute | Value |
|---|---|
| Brand Name | NINIVISION |
| Model Number | NI-WIFI1-CAM01 |
| Megapixels | 8MP |
| High Definition | 8.0 Megapixels |
| Resolution | 4MP+4MP/Dual Lens |
| Zoom Type | Optical zoom |
| Zoom | 10X |
| Digital Zoom | 8x |
| Lens (mm) | 3.6mm |
| Lens Quantity | Multi-Lens |
| Pan & Tilt Lens Angle | 0~355° Pan & 0~90° Tilt |
| Movement Range (Pan) | 0°-360° |
| Connectivity | IP/Network Wireless |
| AI Functions | Smart Tracking, Human Detection, Auto Tracking |
| Audio Output | Two Way Audio (Built-in Mic & Speaker) |
| Color Night Vision | Yes (Dual Light Full-Color) |
| IR Distance (m) | 30m-50m Distance |
| Minimum Illumination (Lux) | 0.001Lux |
| Viewing Angle | 360° |
| Video Compression Format | H.264, H.265 |
| Frame Rate | Up to 15 fps |
| TF Card | 128G TF Card (Micro SD Card Slot Up to 128GB) |
| Internal Storage | 128G |
| Power Supply | Normal |
| Power Supply (V) | DC 5V |
| Power Consumption (W) | <3W |
| Operating Temperature | -10°-60° |
| Scene | Indoor and outdoor |
| Installation | Normal |
| Color | WHITE |
| Dimensions (L x W x D)(mm) | 80*80*110.4mm (3.15*3.15*4.35inch) |
| Shell Material | Plastic |
| Sensor Brand | Sony |
| Sensor | CMOS |
| Supported Mobile Systems | Android, IOS |
| Supported Operating Systems | Windows 7, Windows 10 |
| Alarm Action | FTP Photo, Email Photo, Local Alarm |
| Special Features | Vandal-proof |
| Certification | CE, FCC |
6. User Tips
- For optimal performance, ensure your Wi-Fi signal is strong at the camera's installation location. Consider a Wi-Fi extender if necessary.
- Regularly check the EseeCloud app for notifications and review recorded footage to stay informed about your property.
- When using the two-way audio, speak clearly and ensure your mobile device's microphone is not obstructed.
- Experiment with motion detection sensitivity settings to minimize false alarms while ensuring critical events are captured.
7. Warranty and Support
For detailed warranty information, technical support, and additional documentation, please refer to the official user manual PDF available at: NINIVISION 4K 8MP WiFi PTZ IP Camera User Manual (PDF).
It is recommended to consult the full PDF manual for comprehensive details not covered in this quick start guide.