Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Newmine 1080P Dash Cam. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
Safety Information
- Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
- Ensure the device is securely mounted and does not obstruct the driver's view.
- Use only the provided power adapter and accessories.
- Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
- Keep the device away from water and other liquids.
Package Contents
Please check the package for the following items:
- Main Dash Cam Unit (with built-in front camera and IPS screen)
- Interior Camera (optional, for 2 or 3 channel models)
- Rear View Camera (optional, for 2 or 3 channel models)
- Suction Cup Mount
- Car Charger / Power Cord
- User Manual (this document)
- Rear Camera Cable (if applicable)
Product Overview
Device Layout and Buttons
- Menu/Camera/Playback Button (M): Used to access the menu, switch to camera mode, or enter playback mode.
- Power Button: Short press to turn the screen on/off. Long press to switch the device on/off.
- Down Button: Used to navigate down in menus or turn sound recording on/off during shooting.
- Confirm Button (OK): Confirms selections in menus, starts/stops video recording.
- Up Button: Used to navigate up in menus.
- Front Camera: Main recording lens.
- Microphone: Records audio.
- Reset Button: Used to restart the device in case of a crash.
- Holder Interface: For attaching the suction cup mount.
- Rear Camera Interface: Port for connecting the optional rear camera.
- Power Interface: For connecting the car charger.
- TF Card Slot: For inserting the MicroSD card.
- Display Screen: 2.0 inch IPS HD screen.
- Inside Camera (optional): Records the vehicle interior.
- Night Vision On/Off: Button to manually activate/deactivate fill light for night vision.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Newmine |
| Chipset Manufacturer | Generalplus |
| Assembly Mode | Portable Recorder |
| Display Screen | 2.0 inch IPS HD screen (800x480 pixels) |
| Display Size | <3" |
| Screen Ratio | 4:3 |
| Built-in Screen | Yes |
| Touch Screen | No |
| Front Camera Resolution | Max 1680x960 (30f/s) |
| Inside Camera Resolution | HD 640x480 (25f/s) |
| Camera Resolution (Max Support) | 3M |
| Number Of Lenses | 2 (or 3 with optional rear camera) |
| Front Lens Aperture/Angle | F2.0 aperture / 170° wide angle |
| Video Code | AVC (H.264 compression) |
| Video Format | AVI |
| Image Format | JPG |
| Frames Per Second | 25 |
| Loop-Cycle Recording Feature | Yes (Do not leak seconds) |
| Audio Recorded | Yes (4015 Standard Omnidirectional Microphone) |
| NightShot Function | Yes (Fill light, open manually) |
| G-sensor | Support (High/Medium/Low Sensitivity) |
| Motion Detection | Support |
| Parking Monitoring | Support |
| Power Source | Battery (Built-in 150 mAh polymer lithium battery) |
| External Port | MINI USB 5V/2A, 2.5mm digital 720P rear view lens port |
| Storage | Max support 32GB Class10 TF card |
| Dimensions (W x H x D) | 15.5*11.1*7.3 cm (Product package dimensions) |
| Operating Temperature | -40°C ~ 70°C |
| Operating Humidity | 15-65%RH |
| Storage Temperature | -40°C ~ 70°C |
| Language | Support multi-language |
Setup
Installation Guide
- Test Rear Camera (if applicable): If your package includes a rear camera, test its functionality before permanent installation.
- Power Off Vehicle: Ensure the car engine is turned off.
- Insert TF Card: Insert a high-speed TF card (Class 10 or above, minimum 4GB, maximum 32GB) into the recorder's slot.
- Mount Dash Cam: Securely attach the dash cam to the car's front windshield using the provided suction cup mount. Ensure it does not obstruct your view.
- Connect Power: Insert the car charger into the car's cigarette lighter socket. Route the charging cable neatly along the edge of the car door frame and under the carpet.
- Install Rear Camera (optional): Install the rear camera at the rear of the vehicle, paying attention to its orientation (up/down direction). The wiring can be buried along the edge of the car roof.
- Option A (DIY): Adsorb the rear camera on the glass above and behind the car. This method allows real-time rear video recording but does not enable the reversing visual function.
- Option B (Professional): For reversing visual function, install the camera above the license plate and connect its power to the reversing lights. Professional installation is recommended for this option.
- Adjust Lens: Adjust the position of the front and interior lenses to ensure the best viewing angle.
- Verify Operation: Start the car engine and check that the dash cam is operating properly.
Operating Instructions
Automatic Recording
When the car engine starts, the recorder will automatically begin recording. When the car engine is turned off, the recorder will automatically save the current video segment and shut down. Recorded video segments are stored on the TF card. If the TF card becomes full, the recorder will automatically overwrite the oldest recorded files (Loop Recording).
- Video segment length can be set to 1, 2, or 3 minutes in the menu.
- Videos are saved in folders named "DCIMA" and "DCIMB" on the TF card (if a rear view camera is included).
Motion Detection
In standby mode, enable motion detection via the menu. When the lens detects a moving object in its peripheral area, the device will automatically start recording for 30 seconds, then stop. To disable, enter the menu and turn off motion detection.
G-Sensor (Gravity Sensor)
The built-in G-sensor detects sudden vehicle collisions. If a collision occurs, the recorder will automatically lock the video footage from 5 seconds before to 10 seconds after the event. A lock icon will appear on the display. These locked files will not be overwritten by loop recording.
- G-sensor sensitivity (High/Medium/Low) can be adjusted in the setup menu according to your needs.
Key Lock Feature
To protect a specific video segment from being overwritten, short press the [M] button during video recording. This will lock the current video file.
Setting Date and Time
In shooting mode, press the [M] key to enter the menu settings. Navigate to the "Date/Time" menu, press [OK] to confirm adjustments, and then press [M] to exit the menu. Ensure the date and time are set correctly for accurate accident forensics.
File Playback
In playback mode, press the [OK] key to play a recorded file. To exit playback mode, press the MODE button again.
Reversing Visual Function (with optional rear camera)
For this function to work, the DVR must be connected to the car charger, and the rear-view camera must be connected to the reversing lights. When you shift into reverse gear (R position), the screen will automatically switch to display the rear-view camera image. After shifting out of reverse, the machine will automatically return to video recording mode.
Note: Please test the rearview camera before installation to ensure it is functioning correctly.
Parking Monitor (Unattended Surveillance)
To use this function, the device must be continuously powered. Enable "Motion Detection" and "Parking Monitoring" in the main menu. In standby mode, if the vehicle experiences vibration or a moving object is detected in front, the G-sensor will trigger the recorder to automatically start, lock a 30-second video, and save it. The device will then automatically shut down after 5 seconds if no further operation is detected.
Note: This function is intended for use when the vehicle is parked. Turn off motion detection and parking monitoring during normal driving to avoid unintended recordings or battery drain.
Menu Settings
Press the [OK] key to stop recording, then press [M] to enter the menu. Long press [M] in video mode to access video menu settings. In photo mode, long press [M] to access photo menu settings.
Video Menu Settings
| Setting | Options | Description |
|---|---|---|
| Resolution | 1080P FHD/720P/VGA | Sets video recording quality. |
| Loop Recording | Off/1 minute/2 minutes/3 minutes | Sets the duration of video segments before overwriting oldest files. |
| High Dynamic Range (HDR) | On/Off | Improves image quality and visual effect. |
| Exposure Compensation | -3 to +3 | Adjusts brightness of the video. |
| Motion Detection | On/Off | Enables/disables automatic recording when motion is detected in standby. |
| Sound Record | On/Off | Enables/disables audio recording. |
| Time Stamp | On/Off | Displays date and time on recorded video. |
| Car Number | On/Off | Option to display car number on video. |
| G-Sensor Sensitivity | High/Medium/Low | Adjusts sensitivity for collision detection and file locking. |
| Parking Monitor | On/Off | Enables/disables unattended surveillance. |
| Date Time | Adjustment (Years, months, date, hours, minutes, seconds) | Sets the current date and time. |
| Automatic Shutdown | Off/3 minutes/5 minutes/10 minutes | Sets idle time before automatic power off. |
| Keypad Tone | On/Off | Enables/disables button press sounds. |
| OSD Language | Support multilingual | Selects display language. |
| Light Source Frequency | 50HZ/60HZ | Adjusts for regional power frequency (e.g., PAL/NTSC). |
| Format | Confirm/Cancel | Formats the TF card. |
| Screen Saver | Off/30 seconds/1 minute/2 minutes | Sets time before screen turns off automatically. |
| Default Setting | Confirm/Cancel | Restores factory default settings. |
| Version | Machine software version number | Displays current firmware version. |
Photo Menu Settings
| Setting | Options |
|---|---|
| Shooting Method | Single shooting/2 seconds timer/5 seconds timer/10 seconds timer |
| Resolution | 1M/2M/3M |
| Continuous Shooting | On/Off |
| Picture Quality | High quality/Standard/Economy |
| Acutance | Strong/Standard/Soft |
| White Balance | Automatic/Sunlight/Cloudy/Tungsten lamp/Fluorescent lamp |
| ISO | Automatic/100/200/400 |
| Exposure Compensation | -3 to +3 |
| Time Stamp | Off/Date |
Maintenance
- TF Card Care: Regularly format your TF card (at least once a month) to ensure optimal performance and prevent file errors. Use a genuine Class 10 high-speed card.
- Cleaning: Use a soft, dry cloth to clean the camera lenses and screen. Do not use abrasive cleaners or solvents.
- Storage: If storing the dash cam for an extended period, ensure it is fully charged and stored in a cool, dry place.
- Firmware Updates: Check the manufacturer's website periodically for firmware updates to improve performance and add new features.
Troubleshooting
- Q: Machine appears "file error" message.
- A: Restore factory settings and format the memory card. This issue is commonly related to the TF card.
- Q: The screen appears horizontal stripes interference.
- A: Please select the correct power supply frequency (50HZ for PAL regions, 60HZ for NTSC regions) in the settings menu.
- Q: How to properly turn on the 24-hour parking monitoring function?
- A: Ensure the device is continuously powered (e.g., via a hardwire kit or mobile power bank) and enable motion detection and parking monitoring in the menu. During normal driving, these functions should be off to prevent automatic shutdown or crashes.
- Q: Night shooting screen is not clear enough.
- A: Recorder shooting depends on outside strong light sources (such as streetlights or car lights). Manually open the fill light for night vision if available.
- Q: The machine always reverts to the default date and time.
- A: This usually indicates a problem with the internal battery that maintains the clock. Ensure the device is fully charged. If the issue persists, contact support.
- Q: What is the reason for video file "leak seconds" (missing seconds)?
- A: Ensure loop recording is enabled and use a genuine Class 10 high-speed TF card. Most problems stem from the memory card.
- Q: Why does the machine automatically shut down suddenly during recording?
- A: This can happen if the parking monitoring function is enabled during driving, or if the ambient temperature exceeds 70°C. Ensure parking monitoring is off during normal operation and avoid extreme heat.
User Tips
- TF Card Quality: Always use a high-quality, genuine Class 10 MicroSD card from a reputable brand to prevent recording errors and ensure reliable performance.
- Regular Formatting: Format your TF card regularly (e.g., monthly) directly through the dash cam's menu to maintain optimal recording stability.
- Check WiFi Feature: If your model supports WiFi, refer to the specific instructions for connecting to your phone and downloading videos. For models without WiFi, videos are typically accessed by removing the TF card and inserting it into a computer.
- Optimal G-Sensor Setting: Adjust the G-sensor sensitivity to prevent unnecessary file locking from minor bumps, but ensure it's sensitive enough to detect actual collisions.
- Parking Monitor Usage: Remember to disable the parking monitor function when driving to avoid unexpected shutdowns or continuous recording that can drain the battery.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the official product page where you purchased the device. Keep your proof of purchase for any warranty claims.
A PDF version of this user manual is available for download: User Manual (PDF)