Introduction
Thank you for choosing the DESLOC Electronic Keypad Door Lock with Handle Set. This smart lock provides enhanced security and convenience for your home with multiple unlocking methods, including fingerprint, PIN code, and traditional mechanical keys. This manual will guide you through the installation, operation, and maintenance of your new lock.
DESLOC A100F Electronic Keypad Door Lock with Handle Set, including two mechanical keys.
Product Overview
Lock Body Components
Detailed view of the exterior lock showing fingerprint reader, keypad, and light indicator.
The lock consists of an exterior and interior unit:
Exterior Lock Features:
- Light Indicator: Provides visual feedback on lock status.
- Keypad: For PIN code entry.
- Fingerprint Reader: For biometric unlocking.
- Key Hole: For mechanical key override.
- Type-C Backup Power Port: For emergency power in case of battery depletion.
Interior Lock Features:
- Battery Cover: Protects the battery compartment.
- Thumb Turn: Manual locking/unlocking from the inside.
Package Contents
Please check to ensure all components are present before installation:
All included components for the DESLOC A100F lock.
- Exterior Lock
- Front Rubber Pad
- Mounting Plate
- Interior Lock
- Deadbolt
- Reset Tool
- Strike Plate
- Mechanical Key (x2)
- Deadbolt/Strike Plate Screws
- Mounting Plate Screws
- Interior Lock Screws
Specifications
| Feature | Specification |
|---|---|
| Batteries | 4 x AA |
| Working Temperature | -30°C ~ 70°C (Not Condensation) |
| Door Thickness | 35~50mm (1-3/8" to 2") |
| Material | Aluminium Alloy |
| Unlock Mechanism | Fingerprint, Key, Password |
| Password Groups | 99 Groups |
| Fingerprint Groups | 50 Groups |
| Battery Life | 12 months |
| Waterproof Rating | IP54 |
| Auto-lock | Yes |
| Anti-Peeping Password | Yes |
| Handle Direction | Reversible |
The lock uses 4 AA batteries, providing approximately 12 months of battery life.
Installation Guide
The DESLOC A100F is designed for easy installation, typically taking 5-15 minutes.
Easy installation process, typically completed within 5-15 minutes.
1. Prepare Your Door
Ensure your door meets the following requirements:
- Door Thickness: 1-3/8" to 2" (35mm to 50mm)
- Hole Diameter (Cross-bore): 2-1/8"
- Backset Size: 2-3/8" or 2-3/4" (60mm or 70mm)
Verify door dimensions for proper lock fit.
Deadbolt Adjustment: If your backset is 70mm, turn the faceplate 180° to extend the deadbolt length.
2. Install the Deadbolt
- Fix the deadbolt into the door edge using the provided deadbolt screws. Ensure the word "TOP" on the deadbolt is facing up. Keep the deadbolt in the retracted (unlocked) position.
Ensure the deadbolt is correctly oriented and retracted during installation.
3. Install the Exterior Lock
- Attach the exterior lock to the front rubber pad and secure it onto the door.
- Make sure the paddle is slid through the deadbolt and the cable is threaded through the door hole.
NOTE: Route the cable below the deadbolt. The deadbolt must be in the unlock position, and the paddle must be in 'horizontal' status.
4. Install the Mounting Plate and Interior Lock
- Peel the tape off the mounting plate and ensure the cable through the door is positioned near the mounting plate. Fix the exterior lock with 2 screws to the mounting plate.
- Insert the cable into the wire connector, ensuring it is properly and securely installed. Insert the paddle into the hole at the back of the thumb turn on the interior lock.
NOTE: When pressing the indoor panel against the door, try to conceal the wires inside the door or place them in the designated wire-housing areas on the indoor panel.
- Open the battery cover. Fix the interior lock body to the mounting plate with 3 screws.
5. Insert Batteries and Set Direction
- Insert 4 AA batteries into the interior assembly while the door is locked, then close the battery cover.
- Set the Lock Direction: This lock requires the deadbolt to be engaged to identify the open direction. Make sure the deadbolt is engaged after installation. If the deadbolt is retracted, a red light will flash with a sound alarm. Rotate the thumb turn to engage the deadbolt and set the opening direction.
Installation Video Guide
Watch this video for a visual guide on installing and setting up your DESLOC smart lock.
Operating Instructions
Initial Setup: Master PIN Code
The factory default Master PIN code is 123456. It is highly recommended to change this immediately upon receiving the lock.
Change Master PIN Code:
- Press the 'Change Master PIN code' button.
- Enter the current Master PIN code (default: 123456) followed by the '#' key.
- Press '4' followed by the '#' key.
- Enter your new 6-digit Master PIN code followed by the '#' key.
- Repeat your new 6-digit Master PIN code followed by the '#' key to confirm.
Adding User PIN Codes (Up to 98)
- Press the 'Add User PIN code' button.
- Enter the Master PIN code followed by the '#' key.
- Enter '1' followed by the '#' key.
- Enter a 2-digit ID number (02-99) for the user followed by the '#' key.
- Enter the new 4-9 digit User PIN code followed by the '#' key.
- Repeat the new User PIN code followed by the '#' key to confirm.
Adding User Fingerprints (Up to 50)
- Press the 'Adding User fingerprint' button.
- Enter the Master PIN code followed by the '#' key.
- Enter '1' followed by the '#' key.
- Enter a 2-digit ID number (01-50) for the user followed by the '#' key.
- Place the user's finger on the fingerprint reader 5 times, lifting it between each scan, until successful.
Deleting User PIN Codes
Delete Some User PIN Codes:
- Press the 'Delete some of the User PIN codes' button.
- Enter the Master PIN code followed by the '#' key.
- Enter '2' followed by the '#' key.
- Enter '1' followed by the '#' key.
- Enter the 2-digit ID number (02-99) of the PIN code to delete, followed by the '#' key.
Delete All User PIN Codes:
- Press the 'Delete all User PIN codes at a time' button.
- Enter the Master PIN code followed by the '#' key.
- Enter '3' followed by the '#' key.
- Enter '1' followed by the '#' key.
Deleting User Fingerprints
Delete Some User Fingerprints:
- Press the 'Delete some of the User fingerprints' button.
- Enter the Master PIN code followed by the '#' key.
- Enter '2' followed by the '#' key.
- Enter '2' followed by the '#' key.
- Enter the 2-digit ID number (01-50) of the fingerprint to delete, followed by the '#' key.
Delete All User Fingerprints:
- Press the 'Delete all User fingerprints at a time' button.
- Enter the Master PIN code followed by the '#' key.
- Enter '3' followed by the '#' key.
- Enter '2' followed by the '#' key.
Delete All User PIN Codes and Fingerprints
- Press the 'Delete all User at the same time' button.
- Enter the Master PIN code followed by the '#' key.
- Enter '3' followed by the '#' key.
- Enter '3' followed by the '#' key.
Auto-Lock Mode
The lock can be set to automatically lock after a certain duration (3-30 seconds).
- Press the 'Auto lock mode' button.
- Enter the Master PIN code followed by the '#' key.
- Enter '5' followed by the '#' key.
- Enter the desired auto-lock time (3-30 seconds) followed by the '#' key.
Cancel Auto-Lock Function
This programming will keep the door open all the time.
- Press the 'Cancel Auto lock function' button.
- Enter the Master PIN code followed by the '#' key.
- Enter '5' followed by the '#' key.
- Enter '00' followed by the '#' key.
NOTE: You can press '#' to manually lock the door at any time.
Turn Sound On/Off
You can mute or unmute your lock (feature is on by default).
- Press the 'Turn Sound on/off' button.
- Enter the Master PIN code followed by the '#' key.
- Enter '6' followed by the '#' key.
- To turn sound OFF, enter '1' followed by the '#' key.
- To turn sound ON, enter '2' followed by the '#' key.
NOTE: When the lock is muted, you won't hear any beeping for programming, low battery alerts, or system alerts.
Maintenance
- Cleaning: Clean the lock surface with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
- Battery Replacement: Replace all four AA batteries when the low battery alert sounds (6 short beeps and red light flashing 6 times). Do not mix old and new batteries or different types of batteries.
- Fingerprint Sensor: Keep the fingerprint sensor clean and dry for optimal performance.
- Keypad: Ensure the keypad is free from dirt or debris.
- Mechanical Keys: Store your mechanical keys in a safe, accessible location outside your home for emergency access.
Troubleshooting
Light and Sound Indications:
| Event | Lock Response |
|---|---|
| Unlock/Correct Setting | 1 short beep and blue light flashing |
| Lock | 2 short beeps and red light flashing |
| Incorrect Entry/Operation Error | 1 short beep and red light flashing |
| Wrong PIN Code Entry 3 Times | 3 long beeps and red light flashing 3 times |
| Low Voltage | 6 long beeps and red light flashing 6 times |
| Power On | 1 long beep and 3 short beeps, and then blue light flashing |
| Latch Alarm | When the door is not completely closed, the lock will continuously make two long beeps and flashing red LED for reminding |
Common Issues and Solutions:
- Lock is unresponsive: Check battery levels and replace if necessary. Ensure all cables are securely connected.
- Fingerprint not recognized: Ensure your finger and the sensor are clean and dry. Try re-registering your fingerprint.
- PIN code not working: Double-check the PIN code entry. Ensure the lock is not in lockout mode (after 3 incorrect attempts).
- Lockout for Incorrect PIN: After 3 unsuccessful PIN code entries, the keypad will be locked for 180 seconds. Wait for the lockout period to expire.
- Emergency Access: In case of complete battery failure, use the mechanical keys provided or connect a Type-C power bank to the backup power port.
The Type-C backup power port allows temporary power for unlocking if batteries are dead.
User Tips
- Regular Battery Checks: Periodically check the battery status, especially if you notice any sluggishness in operation.
- Backup Keys: Always keep at least one set of mechanical keys in a secure location outside your home.
- Anti-Peeping Feature: When entering your PIN, you can input random digits before or after your actual code to prevent others from guessing your PIN. For example, if your PIN is 123456, you can enter 987+123456+321.
- Fingerprint Enrollment: When enrolling fingerprints, try to use different angles and parts of your finger to ensure better recognition.
- Door Alignment: Ensure your door is properly aligned and closes smoothly. Misalignment can cause the deadbolt to jam or prevent proper locking.
Warranty and Support
Your DESLOC Electronic Keypad Door Lock comes with a 12-month warranty from the date of purchase.
For technical support, warranty claims, or any questions regarding your product, please contact us:
- Website: www.desloc.com
- Email: support@desloc.com
- Phone: +1 (888) 572 6136
For a complete digital version of this user manual, please refer to the official PDF document available on our website.
This manual is based on the official user manual (PDF) provided by DESLOC. The PDF can be found at: DESLOC User Manual (PDF)