1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your CNSPEED Car Trunk Boot Release Switch. Designed as a direct replacement for Suzuki Swift models from 2005-2017, this switch ensures reliable performance and ease of use. Please read this manual thoroughly before installation and use.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the product and vehicle:
- Ensure the vehicle's ignition is off and the battery is disconnected before beginning any electrical work.
- Wear appropriate personal protective equipment, such as gloves and eye protection.
- If you are unsure about any step of the installation process, consult a qualified automotive technician.
- Keep the product away from excessive heat, moisture, and corrosive substances.
3. Package Contents
Verify that all items are present in the package:
- 1 x Tailgate Release Switch (OEM: 37178-62J00)
Note: The new type and old type of this product may be sent randomly. Please ensure the part number matches your requirement.
4. Specifications
| Attribute | Value |
|---|---|
| Item Type | Trunk Lock Release Switch / Tailgate Release Switch |
| Color | Black |
| Material | ABS Plastic (High quality plastic, PP+40GF) |
| OEM No. | 37178-62J00, 3717862J00, 37178 62J00 |
| Model Name | YC102805-BK |
| Fitment | For Suzuki Swift 2005-2017 |
| Item Weight | 0.05kg |
| Item Height | 2.6cm |
| Item Width | 8cm |
| Item Length | 13cm |
| Is It Charged | No |
| Origin | Mainland China |
| Features | Rugged, Anti-corrosion, Durable, Simple Installation, High Reliability, Stable Performance, IP68 Waterproof, Plug and Play |
5. Setup & Installation
The CNSPEED Car Trunk Boot Release Switch is designed for simple, direct replacement. No complicated tools are required.
Installation Steps:
- Prepare the Vehicle: Ensure the vehicle is safely parked with the engine off and the parking brake engaged. For electrical components, it is recommended to disconnect the negative terminal of the car battery to prevent accidental short circuits.
- Remove the Old Tailgate Switch: Carefully locate and remove the existing tailgate release switch from your Suzuki Swift (2005-2017 model). This may involve removing interior trim panels to access the switch and its wiring.
- Install the New Wiring Harness Jack: Connect the wiring harness from the vehicle to the new CNSPEED Tailgate Release Switch. Pay close attention to ensure the connection is secure and not loose. A loose connection can lead to intermittent operation or failure.
- Fix the Position: Once the wiring is securely connected, carefully position the new switch into its designated mounting location. Ensure it is properly seated and secured.
- Test Functionality: Reconnect the car battery (if disconnected). Test the new trunk boot release switch to ensure it operates correctly and the trunk opens smoothly.
6. Operation
To operate the trunk boot release, simply press the button on the installed switch. Ensure the vehicle is unlocked or in a state where the trunk release is enabled (e.g., ignition on, but not necessarily running, depending on vehicle's specific logic).
7. Maintenance
The CNSPEED Trunk Boot Release Switch is designed for durability and requires minimal maintenance. Follow these guidelines:
- Regular Inspection: Periodically check the switch for any signs of wear, damage, or loose connections.
- Cleaning: Clean the switch surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the plastic material.
- Environmental Protection: While the switch features IP68 waterproofing, prolonged exposure to extreme conditions should be avoided where possible to maximize lifespan.
8. Troubleshooting
Common Issues and Solutions:
- Trunk does not open when button is pressed:
- Check all wiring connections to ensure they are secure and not loose.
- Verify that the vehicle's electrical system is functioning correctly (e.g., battery charged, fuses intact).
- Ensure the vehicle is unlocked or in the appropriate state for trunk release.
- Confirm that the installed switch is the correct part number for your vehicle model and year.
- Button feels stiff or unresponsive:
- Inspect the button for any debris or obstruction.
- Ensure the switch is properly seated in its mounting position without any binding.
If problems persist after following these steps, it is recommended to consult a professional automotive technician.
9. User Tips
- Verify Part Number: Always double-check the OEM part number (37178-62J00) and vehicle compatibility (Suzuki Swift 2005-2017) before purchasing and installing to ensure a perfect fit and function.
- Quality and Fit: Users have reported that this item fits well and works effectively, comparable to the original part.
- Value for Money: Despite initial skepticism due to pricing, many users find the product to offer excellent performance and value.
10. Warranty & Support
For specific warranty information, please refer to the product listing or contact the seller directly. For technical support or further assistance, please reach out to CNSPEED customer service.
A PDF version of the user manual may be available for download. Please check the product page for the link: User manual (PDF)