Aune SR7000 Full Size Close-Back Wired Headphones

Introduction

Thank you for choosing the Aune SR7000 Full Size Close-Back Wired Headphones. These audiophile-grade headphones are designed to deliver exceptional sound quality with a 50mm dynamic driver and a 55ohm impedance, providing a rich and immersive listening experience. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new headphones.

Package Contents

Please ensure all items are present in the package:

• Aune SR7000 Headphones
• Detachable Audio Cable (if included)
• User Manual (this document, also available as a PDF download)

Setup

1. Unpack: Carefully remove the headphones and all accessories from the packaging.
2. Connect Audio Cable: If your headphones come with a detachable cable, connect the appropriate end to the headphone's audio input jack (usually located on one of the earcups). Ensure it is securely plugged in.
3. Connect to Audio Source: Plug the other end of the audio cable into your desired audio source (e.g., amplifier, DAC, computer, smartphone).
4. Adjust Fit: Place the headphones on your head and adjust the headband for a comfortable and secure fit. The earcups should fully enclose your ears.

Operating Instructions

The Aune SR7000 headphones are designed for straightforward use:

1. Power On Audio Source: Ensure your audio source is powered on and playing audio.
2. Volume Control: Adjust the volume using the controls on your audio source. The SR7000 headphones do not feature inline volume control.
3. Listening: Enjoy your audio.

Note: These are wired headphones and do not require batteries or charging. They do not feature Active Noise-Cancellation or control buttons on the headphones themselves.

Maintenance

To ensure the longevity and optimal performance of your Aune SR7000 headphones, follow these maintenance guidelines:

• Cleaning: Use a soft, dry, lint-free cloth to wipe the earcups and headband. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the drivers or electronic components.
• Storage: When not in use, store the headphones in a clean, dry place, away from direct sunlight and extreme temperatures. Using a headphone stand or case is recommended to prevent damage.
• Cable Care: Avoid sharply bending or twisting the audio cable. Always grasp the plug, not the cable, when disconnecting.
• Avoid Moisture: Do not expose the headphones to water or excessive humidity.
• Avoid Drops and Impacts: Handle the headphones with care to prevent physical damage.

Troubleshooting

If you encounter issues with your Aune SR7000 headphones, try the following steps:

No Sound or Low Volume:

• Ensure the audio cable is securely connected to both the headphones and the audio source.
• Check the volume level on your audio source and ensure it is not muted.
• Test the headphones with a different audio source to rule out an issue with the original device.
• Test with a different audio cable if available.

Distorted Sound:

• Lower the volume on your audio source.
• Ensure the audio cable is fully inserted and not damaged.
• Test with a different audio source or audio file to determine if the distortion is from the source material.

Uncomfortable Fit:

• Adjust the headband and earcup position until a comfortable seal is achieved around your ears.
• Take breaks during long listening sessions.

Specifications

User Tips

• For optimal sound quality, ensure your audio source is capable of driving 55ohm headphones effectively.
• Allow for a 'burn-in' period of several hours of listening for the drivers to settle and achieve their full sonic potential.
• Experiment with different audio file formats and sources to discover the best listening experience.

Warranty and Support

Your Aune SR7000 headphones come with a 12-month warranty from the date of receipt.

Malfunctions: If the product malfunctions within this 12-month period, please contact the seller immediately for assistance. The product must be returned for repair or replacement.

Returns: If any product has issues, it must be returned to the seller before a repair or replacement can be issued. Please note that returns for reasons other than malfunction or product issues are not accepted.

For any questions or support needs, please reach out to the Teching Digital Store directly.