1. Important Safety Information
Please read this safety information carefully before using the appliance.
Danger
- Water and electricity are a dangerous combination. Do not use this appliance in wet surroundings (e.g., in the bathroom or near a shower or swimming pool).
- Keep the adapter dry.
- Do not let water run into the appliance or spill water onto the appliance.
- This appliance is for indoor use only.
Warning
- If the adapter, cord, or appliance has been damaged in any way, liquid has spilled or objects have fallen into and/or onto the appliance, the appliance has been exposed to rain or moisture, does not operate normally, or has been dropped or damaged, it should not be operated.
- Only use the appliance in combination with the adapter supplied.
- If the adapter (cord) is damaged, always have it replaced with one of the original type in order to avoid a hazard.
Caution
- The appliance has no on/off switch. To disconnect the appliance, remove the adapter from the wall socket. The adapter must remain easily accessible at all times.
- If you often wake up too early or with a headache, reduce the set light intensity level and/or the set Sunrise Simulation time.
- If you often wake up by the alarm sound, increase the set light intensity level or the set Sunrise Simulation time.
2. Product Overview
What's in the Box
Upon unpacking, please ensure all items are present and in good condition:
- User Manual
- Wake-Up Light Unit
- Power Cord
- 5V/2A Adapter
- CR2032 Battery (Pre-Installed)

Image: Niditon Wake-Up Light Alarm Clock with packaging and smartphone showing app interface.

Diagram: Contents of the box including the Wake-Up Light, power accessories, and user manual.
Device Layout and Buttons
Familiarize yourself with the device's display and control buttons:

Diagram: Front view of the Wake-Up Light with labeled buttons and display areas.
The display shows time, alarm status, FM radio status, and other indicators. Buttons are located around the device for various functions.
| Icon/Button | Function |
|---|---|
| ⏰ | Alarm 1 On/Off (Press) / Alarm 1 Setting (Press and Hold) |
| ⏰⏰ | Alarm 2 On/Off (Press) / Alarm 2 Setting (Press and Hold) |
| ⏱ | Snooze / Sunrise Light On/Off |
| ◀/▶ | Frequency +/- (Volume +/- when FM is on) |
| ☀ | Light Brightness - / Set - |
| ☀+ | Light Brightness + / Set + |
| ★ | Color Light On/Off / Confirm |
| FM | FM Radio On/Off |
| Sleep | Sleep Timer (Press) / Sleep Sound Options (Press and Hold) |
| Dimmer/Time Set | Dimmer (Press) / Time Setting (Press and Hold) |
3. Setup Guide
3.1 Initial Power On
Before first use, ensure the pre-installed CR2032 battery's insulation sheet is removed to activate memory mode. This battery preserves your settings during power outages.

Diagram: Pulling out the insulation sheet from the battery compartment.
Connect the Wake-Up Light to a power source using the provided 5V/2A adapter. Some functions may be limited if a lower power adapter is used.

Image: Wake-Up Light connected to its power adapter.
Place the Wake-Up Light approximately 16-20 inches (40-50 cm) from your head, typically on a bedside table, for optimal effect.
3.2 Setting the Clock Time
You must set the clock time when you first plug in the appliance.
- Press the "Light Brightness - / Set -" or "Light Brightness + / Set +" button to adjust to 12-hour or 24-hour format. Press the "Color Light On/Off / Confirm" button to confirm.
- Press the "Light Brightness - / Set -" or "Light Brightness + / Set +" button to set the Hours. Press the "Color Light On/Off / Confirm" button to confirm.
- Press the "Light Brightness - / Set -" or "Light Brightness + / Set +" button to set the Minutes. Press the "Color Light On/Off / Confirm" button to complete.
For subsequent time adjustments, press and hold the "Dimmer / Time Set" button on the right side of the device to enter the time setting process.

Image: Wake-Up Light displaying the time, ready for setting.
3.3 App Control Setup
The Wake-Up Light can be controlled via a smartphone application, referred to as "Halo Light" APP. Download the official app from your device's app store. Follow the in-app instructions to pair your device via Bluetooth.

Image: Smartphone displaying the 'Halo Light' app interface for controlling the Wake-Up Light.
4. Operating Instructions
4.1 Alarm Functions
The device supports two independent alarms (Alarm 1 and Alarm 2).
Setting an Alarm (Alarm 1 Example)
Press and hold the "Alarm 1 On/Off" button to enter the Alarm 1 setting process.
- Use the "Light Brightness - / Set -" or "Light Brightness + / Set +" buttons to set the alarm hours. Confirm with the "Color Light On/Off / Confirm" button.
- Use the "Light Brightness - / Set -" or "Light Brightness + / Set +" buttons to set the alarm minutes. Confirm with the "Color Light On/Off / Confirm" button.
- Use the "Light Brightness - / Set -" or "Light Brightness + / Set +" buttons to select an alarm sound. Confirm with the "Color Light On/Off / Confirm" button.
- OFF: No Sound
- S01-S07: Wake-Up Ringtones (Bird Singing, Ocean Wave, Beep, Piano, Stream, Valley Echo, Bell)
- FM Radio: Wakes you up to the last listened FM channel.
- Use the "Light Brightness - / Set -" or "Light Brightness + / Set +" buttons to adjust the alarm volume (level 01-20). Confirm with the "Color Light On/Off / Confirm" button.
- Use the "Light Brightness - / Set -" or "Light Brightness + / Set +" buttons to set the sunrise simulation time (10-60 minutes before the alarm). Confirm with the "Color Light On/Off / Confirm" button.
- Use the "Light Brightness - / Set -" or "Light Brightness + / Set +" buttons to set the maximum brightness of the sunrise light (level 01-20). Confirm with the "Color Light On/Off / Confirm" button to complete.
Alarm 2 is set in the same manner as Alarm 1.

Image: Wake-Up Light displaying an alarm time, indicating alarm setting in progress.
Turning Alarms On/Off
Press the respective "Alarm 1 On/Off" or "Alarm 2 On/Off" button to toggle the alarm on or off. The alarm icon will appear/disappear on the display.
Snoozing
When the alarm sounds, tap the "Snooze / Sunrise Light On/Off" button to activate snooze. The light remains on, but the sound is muted for 9 minutes, after which the alarm will sound again.
To turn off the alarm completely when it's sounding, press the "Alarm 1 On/Off" or "Alarm 2 On/Off" button. The alarm profile will be deactivated for that day. The light and sound will automatically turn off 30 minutes after the alarm has gone off if no action is taken.
4.2 Sunrise Simulation and Lighting
The Wake-Up Light gently prepares your body for waking up by gradually increasing light intensity and changing color from deep morning red to bright daylight over a set period (10-60 minutes).

Image: Sunrise simulation in action, controlled via smartphone app.
Using Sunrise Light as a Lamp
Press the "Snooze / Sunrise Light On/Off" button to turn on the sunrise light. Use the "Light Brightness - / Set -" or "Light Brightness + / Set +" buttons to adjust brightness (01-20). Press the "Snooze / Sunrise Light On/Off" button again to turn it off.
Colored Lights
Press the "Color Light On/Off / Confirm" button to turn on the colored lights. Repeatedly press this button to cycle through 11 lighting effects:
- Color Modes (1-5): Red, Green, Cyan, Blue, Purple
- Effect Modes (6-11): Autochromic, Clockwise, Counterclockwise, Aurora, Flame, Snowy Mountain
Adjust brightness using the "Light Brightness - / Set -" or "Light Brightness + / Set +" buttons (01-20). Press the "Color Light On/Off / Confirm" button again to turn off the colored light when in C-11 mode.
4.3 Fall-Asleep Mode
The Fall-Asleep mode helps you relax and fall asleep with calming sounds and dimming light.
Sleep Sound Options
Press and hold the "Sleep Timer" button to enter sleep sound settings. Use the "Light Brightness - / Set -" or "Light Brightness + / Set +" buttons to choose from:
- S-01: Meditation
- S-02: Chirp
- S-03: Ocean Wave
- FM Radio: Plays the last listened FM channel.
Confirm your selection with the "Color Light On/Off / Confirm" button.

Image: Fall-asleep mode with natural sounds and soft lighting.
Sleep Timer
Press the "Sleep Timer" button repeatedly to set the duration: ALL (continuous), OFF, 15/30/60/90/120 minutes. The setting will automatically save and start after 2 seconds.
Sound Volume
Use the "Frequency +/-" buttons to adjust the sound volume (level 01-20) while it is playing.
4.4 FM Radio
Searching for FM Channels
Press the "FM Radio On/Off" button to turn on the FM radio. Press and hold the "FM Radio On/Off" button for 2 seconds to automatically search for channels (76.0MHz to 108MHz). After the initial search, you can cycle through saved channels by pressing the "FM Radio On/Off" button.
To manually adjust channels after an automatic search, press and hold the "Frequency +/-" buttons.
Tip: Ensure the antenna is fully unwound and reposition the device for the best reception.

Image: Wake-Up Light displaying FM radio frequency.
FM Volume
When FM is enabled, use the "Frequency +/-" buttons to adjust the radio volume (01-20).
Press the "FM Radio On/Off" button again to turn off the radio.
4.5 USB Charging
You can use the USB port on the device to charge your USB-powered devices (maximum 1000 mA).

Image: Smartphone charging via the Wake-Up Light's USB port.
5. Maintenance
5.1 Cleaning and Storage
- Clean the appliance with a soft cloth.
- If you are not going to use the appliance for an extended period, remove the adapter from the wall socket and store the appliance in a safe, dry location where it will not be crushed, banged, or subject to damage.
5.2 Battery Replacement
The pre-installed CR2032 battery typically lasts for 2 years. When the battery is exhausted, please replace it to maintain the memory function for your settings.
Environmental Note: Do not dispose of the product with normal household waste. Hand it in at an official collection point for recycling. Follow your country's rules for the separate collection of electrical and electronic products to help preserve the environment and human health.
6. Troubleshooting
- Device does not power on: Ensure the 5V/2A adapter is correctly connected to a working power outlet and the device. Check if the insulation sheet has been removed from the battery compartment.
- Waking up too early or with a headache: Reduce the set light intensity level and/or the set Sunrise Simulation time.
- Not waking up to alarm sound: Increase the set light intensity level or the set Sunrise Simulation time.
- Poor FM radio reception: Fully unwind the antenna and try repositioning the device to find a better signal.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | JN01 |
| Rated Input Voltage Adapter | 100-240V |
| Rated Input Frequency Adapter | 50/60Hz |
| Rated Output Power Adapter | 10W |
| USB Charging Port Output | 5V, 1000mA |
| Nominal Light Output (Level 1-20) | 1 - 210 lux at 45cm |
| Nominal Light Color (Mode 1-12) | 1600W |
| Dimensions (Height x Width x Depth) | 17 x 17 x 8 cm |
| Weight Main Unit / Adapter | Approx. 0.3kg / 0.04kg |
| Cord Length Adapter | 120cm |
| Operating Temperature | 0°C to 40°C |
| Relative Humidity | 15% to 90% (non-condensing) |
| FM Operating Frequency | 76.0 MHz - 108.0 MHz |
| Package Length | 18 cm |
| Package Width | 18 cm |
| Package Height | 9 cm |
| Package Weight | 0.503 kg |
8. User Tips
- Leverage App Control: Many users find the smartphone app (Halo Light APP) to be a convenient and intuitive way to control all features, including lighting, radio, and alarm settings.
- Experiment with Sounds: Explore the various natural sounds and FM radio options for both waking up and falling asleep to find what works best for your personal preference.
9. Support
For further assistance or inquiries, please refer to the following resources:
- Official Store: niditon.aliexpress.com
- Email Support: gztmsy@dingtalk.com
- PDF User Manual: A detailed PDF version of this manual is available for download here.