Introduction
Thank you for purchasing the LUMINTOP W3 Multi-Light Sources Mini Rechargeable LEP Flashlight. This manual provides detailed instructions for the safe and efficient use of your new flashlight. Please read it thoroughly before operation and keep it for future reference.

Package Contents
Please check the package for the following items:
- 1 x LUMINTOP W3 Flashlight
- 1 x 18350 Li-ion Battery
- 1 x USB-C Charging Cable
- 1 x Lanyard
- 2 x Spare O-rings
- 1 x User Manual

Setup
Battery Installation
- Unscrew the tail cap of the flashlight.
- Important: Before first use, remove the insulation sheet located inside the battery compartment.
- Insert the provided 18350 Li-ion battery with the positive (+) terminal facing towards the flashlight's head.
- Screw the tail cap back on securely.

Charging
The LUMINTOP W3 features a built-in, internal waterproof USB-C charging port.
- Locate the USB-C charging port on the flashlight body.
- Connect the provided USB-C charging cable to the port and a power source.
- Observe the indicator light:
- Standby (not charging): Green indicates normal battery voltage. Red indicates low battery voltage.
- During Charging: The green light blinks.
- Fully Charged: The green light remains constant.
- When not charging, ensure the rubber plug fully covers the charging port to prevent moisture, corrosive liquids, or conductive objects from causing circuit malfunctions.

Operation
The LUMINTOP W3 is operated via a stainless-steel side switch. The flashlight offers multiple light sources and modes for various situations.

Basic Controls
| Action | From OFF | From ON |
|---|---|---|
| 1 x Click | Power ON (default Floodlight, with mode memory) | Power Off |
| 2 x Click | Spotlight | Switch between Floodlight and Spotlight |
| 3 x Click | Strobe | Strobe |
| 4 x Click | Combo (Floodlight + Spotlight) | Combo |
| 5 x Click | Lockout (repeated 5 clicks or loosen battery to unlock) | / |
| Press & Hold | Red Light | Floodlight: Cycle through High-Low, release to confirm. Red Light: Cycle through modes (Red SOS, Eco, Red light) |
| 7 x Click | Turn indicator light ON or OFF | Turn indicator light ON or OFF |
Battery Level Indicator
When the battery voltage is low, the switch indicator will turn red. Please recharge or replace the battery promptly.

Light Modes Overview
- Spotlight: Provides a focused beam for long-distance illumination.
- Floodlight: Offers a wide beam angle for close-range and wide-area illumination.
- Combo Light: Combines floodlight and spotlight for maximum output.
- Red Light: Gentle on human eyes, preserves night vision, suitable for astronomy, camping, wildlife observation, and as a warning/signal light.
- Strobe/SOS: For signaling or self-defense.



Turbo Glow Feature
The turbo glow bezel ring on the head and tubes on the tail make the lamp more eye-catching and easy to locate in the dark. Note: Turbo-glow material requires prior light exposure to shine. Recommended to charge it using a flashlight or UV light.

Specifications
| Category | Value | |
|---|---|---|
| Floodlight Output | Eco | 5 LM |
| Low | 80 LM | |
| High | 320 LM | |
| Spotlight Output | 300 LM | |
| Combo Output | 550 LM | |
| Red Light Output | 50 LM | |
| SOS Output | 50 LM | |
| Strobe Output | 200 LM | |
| Floodlight Runtime | Eco | 36H |
| Low | 4H | |
| High | 5M+1H20Min | |
| Spotlight Runtime | 3M+1H | |
| Combo Runtime | 3M+50M | |
| Red Light Runtime | 2H | |
| SOS Runtime | 4H | |
| Strobe Runtime | 1H | |
| Distance | 700m (Max) | |
| Intensity | 122500cd (Max) | |
| Impact Resistant | 1m | |
| Waterproof | IPX8, underwater 2m | |
| Light Source | White laser emitter + Red & white COB LED | |
| Power | 15W (Max) | |
| Battery | 1 X 18350 Li-ion battery | |
| Size | 26 * 24 * 79mm | |
| Net Weight | Approx. 88g (battery included) | |
Notice: The above approximate data are lab-tested and may vary due to the difference between the environment and batteries. The runtime on High, Spot light, and Combo are accumulated due to over-heat protection settings.

Maintenance
- Battery Maintenance: Charge the battery every 3 months to maintain performance, especially during extended periods of non-use.
- Charging Port Protection: When not charging, ensure the rubber plug fully covers the charging port to prevent moisture, corrosive liquids, or conductive objects from causing circuit malfunctions.
- Storage: For extended periods of non-use, loosen the tail cap and remove the battery to prevent battery leakage and damage to the flashlight.
- Cleaning: Keep the threads and O-rings clean and lubricated to ensure smooth operation and waterproof integrity.
Safety and Warnings
- Battery Warning: Contains a battery. Do not disassemble, heat above 100°C, or incinerate.
- Choking Hazard: Contains small parts. Not suitable for children under 3 years old. Keep out of reach of children.
- High-Intensity Light: Do not shine directly into eyes – risk of eye damage.
- Avoid Pointing At: Do not point the flashlight at people, animals, moving vehicles, or flammable materials.
- Accidental Activation: Always engage the lockout feature (5 clicks from OFF) or loosen the tail cap during transport or storage (e.g., in a pocket or backpack) to prevent accidental activation.
- Non-replaceable Light Source: The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
- Heating Notice: High brightness modes generate significant heat. This is normal. Limit usage based on comfort.
- Step-down Behavior: Due to thermal regulation, brightness may automatically reduce and restore based on the flashlight's temperature. Repeated use of turbo mode may trigger step-down cycles.
- Runtime Notes: Listed runtimes are lab-tested under ANSI standards. Real-world performance may vary depending on environmental conditions and battery usage.
- No Forced Cooling: Do not immerse the flashlight in cold water immediately after high brightness use. Rapid temperature change can cause thermal expansion and contraction, potentially leading to seal failure and water ingress. Allow the flashlight to cool naturally.
- Water Resistance: The flashlight is IPX8 rated, allowing operation underwater up to 2 meters for 30 minutes. However, it is not designed for diving. Do not operate switches underwater.

Troubleshooting
- Flashlight not turning on: Ensure the insulation sheet has been removed from the battery compartment. Check if the battery is inserted correctly with the positive terminal facing the head. Ensure the tail cap is screwed on tightly. The flashlight might be in lockout mode (5 clicks to unlock).
- Dimming or unexpected shutdown: The battery voltage might be low. Recharge the battery promptly. The flashlight might be reducing output due to overheat protection; allow it to cool down.
- Indicator light not working: Ensure the indicator light is not turned off (7 clicks to toggle ON/OFF).
- Charging issues: Ensure the USB-C cable is properly connected and the power source is active. Check the charging port for debris.
User Tips
- The W3 is praised for its compact size and powerful output, making it a great choice for everyday carry (EDC).
- Its multi-light sources (LEP, flood, red) offer versatility, with the red LED being particularly useful for preserving night vision during outdoor activities.
- For first-time LEP flashlight users, the W3 offers an excellent introduction to this technology with its impressive throw and comprehensive features.
- While the eco mode is useful, note that its position in the red light cycle might require a longer press to access other red light modes.
Warranty and Support
Warranty Policy
- 30 Days Free Replacement: Within 30 days of purchase, if any manufacturing defects occur under normal use, the product can be repaired or replaced free of charge.
- 5 Years Free Repair: Within 5 years of purchase, LUMINTOP will repair products free of charge for issues arising from normal use. (Note: Products with built-in batteries have a 2-year warranty; chargers and separate batteries have a 1-year warranty).
- Lifetime Paid Repair: After the free warranty period, LUMINTOP offers lifetime paid repair services. Charges will apply only for replacement parts, excluding labor costs.
Exclusions
The warranty does not cover:
- Normal wear and tear.
- Damage caused by improper maintenance or abuse.
- Damage due to force majeure (e.g., natural disasters).
- Problems caused by human factors or unauthorized modifications.
Contact Information
Shenzhen Lumintop Optoeletronic Co., Ltd.Address: 701, Zhichuang Industrial Building, Chengxin Road, Baolong Community, Baolong Subdistrict, Longgang District, Shenzhen, China 518116
Website: www.lumintop.com
Tel: +86-755-88838666
E-mail: service@lumintop.com
Environmental Disposal Information
This symbol on electrical and electronic products and their accompanying documentation indicates that such products shall not be disposed of as general household waste. Instead, they shall be sent to designated recycling stations where they will be received free of charge for appropriate disposal, treatment, reuse, and recycling.
Proper disposal of waste products helps preserve valuable natural resources and reduces adverse impacts of improper waste disposal on human health and the environment. Please contact relevant authorities in your area for information about your nearest WEEE (Waste Electrical and Electronic Equipment) collection points. Improper disposal of such wastes may result in fines or other penalties in accordance with the law.
