Introduction
This manual provides essential information for the safe and effective use of your QIDEWIN Devil's Eyes LED Wireless Car Moving Eyes Windshield USB Lamp. This innovative product allows for dynamic visual customization on your vehicle's windshield or other surfaces, enhancing its appearance with various animated patterns and messages.
Please read this manual thoroughly before installation and operation, and retain it for future reference.
Safety & Warnings
- DC 12V Automotive Circuits Only: This product is designed exclusively for DC 12V automotive circuits. Connecting it to 220V household power sources is strictly prohibited and will lead to short circuits and product damage.
- Installation Safety: During installation, ensure that the product does not obstruct airbags, seat belt buckles, or dashboard sensors to maintain driving safety.
- No Unauthorized Disassembly: Do not disassemble the product without authorization. Non-professional maintenance may cause circuit faults or safety hazards.
- Compliance: This product requires CE and RoHS 3.0 certifications (LVD 2014/35/EU and EMC 2014/30/EU directives) for EU sales, and FCC/DOT certification for North America.
- Battery Preservation: Avoid leaving ambient lights on when the vehicle is parked for extended periods to prevent battery depletion. It is recommended to turn off the engine within 1 hour after turning off the vehicle.
- Child Safety: Keep the product away from children and avoid ingesting wires or touching high-temperature areas (e.g., heat dissipation areas during prolonged use).
Package Contents
The package typically includes the following components. Please verify all items upon receipt:
- LED Matrix Panel(s) (Quantity may vary based on selected SKU, e.g., 1pc or 2pc)
- USB Power Cable(s) with On/Off Switch
- Remote Control
- User Manual (PDF version available: View User Manual PDF)
Setup and Installation
Follow these steps for proper installation of your LED panel(s):
- Clean Installation Location: Thoroughly wipe the intended installation areas (e.g., car doors, center console, rear windshield) with alcohol to ensure the surface is dry and free of oil stains.
- Fixed Ambient Lighting: Depending on your vehicle model and preference, choose between pasting or embedding the LED light strip/fiber. Arrange the light strip/fiber along the original car cable tray or desired path and press firmly to secure it.
- Connect Power Supply:
- Universal Version: Plug the USB cable into the car cigarette lighter or a suitable USB port to power on.
- Special Car Model: Connect directly to the original car plug without needing to change the wiring.
- Organize Cables: Carefully hide any excess cables within interior gaps to prevent them from interfering with driving operations.
Operating Instructions
Your QIDEWIN LED panel offers multiple ways to control its dynamic effects:
- Power On/Off: Use the switch on the USB cable or the remote control to power the device on or off.
- Function Test: After installation, power on the device and test the color switching, voice control, remote control, and APP control functionalities to ensure they are operating normally.
- Control Methods:
- Remote Control: Use the provided remote control to change patterns, colors, and modes.
- Smartphone App: Download the "ALL-COLOR" app (as indicated in product images) to access advanced customization options, including text input, mass material selection, DIY patterns, and special effects.
- Voice Control: The device supports voice control for certain functions. Refer to the app or remote for specific voice commands.
- Customization: The app allows you to create custom text messages, choose from a library of animations, or design your own patterns.
Maintenance and Storage
- Cleaning: Turn off the device before cleaning. Use a soft, lint-free cloth to gently wipe the surface. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a dry place at room temperature (15°C - 35°C).
- Long-term Storage: If the device will not be used for a long time, charge it to approximately 50% every 3 months to maintain battery health.
Troubleshooting
- Problem: LED panel does not light up.
- Solution:
- Check if the USB cable is securely connected to a 12V power source (cigarette lighter or USB port).
- Ensure the power switch on the USB cable is in the "On" position.
- If using a special car model connection, verify the connection to the original car plug.
- Test with a different USB power source if available.
- Problem: Remote control or app is not responding.
- Solution:
- Ensure the LED panel is powered on.
- For remote control, check if the battery needs replacement.
- For app control, ensure Bluetooth is enabled on your smartphone and the app is correctly paired with the device. Try restarting the app or your phone.
- Problem: Displayed patterns are incorrect or flickering.
- Solution:
- Ensure the power supply is stable and providing sufficient voltage (DC 12V).
- Try resetting the device by unplugging and replugging the power.
- If using the app, ensure it is updated to the latest version.
User Tips
- Connecting Multiple Screens: If you have multiple LED panels (e.g., a 2-piece kit), each panel typically connects via its own USB power cable. Control for multiple panels can often be managed through a single app interface, allowing for synchronized or independent displays. Refer to the app's instructions for multi-device management.
- Preventing Battery Drain: Remember to turn off the LED lights when parking for extended periods, especially if the engine is off, to avoid draining your vehicle's battery.
- Creative Placement: While designed for car windows, the flexible and waterproof nature of the LED panel allows for creative placement in other areas, such as shop windows or event displays, provided a suitable 5V USB power source is available.
Specifications
| Feature | Details |
|---|---|
| Product Name | Car Ambient Light Kit / Automotive Interior Atmosphere Lamp |
| Model Name | Truck Car Devil Eye LED Pixel Panel Light |
| Item Type | Atmosphere lamp |
| Operating Voltage | 5V (USB Powered) |
| Rated Power | 10W |
| Waterproof Level | IP65 |
| Certifications | CE, RoHS, FCC/DOT |
| Dimensions (approx.) | 173mm x 70mm (for 16x32LED-1pc variant) |
| Origin | Mainland China |
Disposal and Recycling
This symbol indicates that this product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.
Please contact your local authorities or the retailer for information on proper disposal methods.
Manufacturer Information
Manufacturer: Guangzhou QIDEWIN Electronic Technology Co., Ltd
Address: China Guangdong Province GuangzhouBaiyun DistrictYongping SubdistrictGuan Ting Xi Jie No:32
EU Authorized Representative: SUCCESS COURIER SL, CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
For further assistance or inquiries, please refer to the official product page or contact the seller.