Introduction
This manual provides essential information for the safe and efficient use of your E-SIMPO E27/E26 Multi-Bulb Lamp Holder Splitter. Please read these instructions carefully before installation and operation, and retain them for future reference.
The E27/E26 Multi-Bulb Lamp Holder Splitter is designed to convert a single E27 or E26 screw socket into multiple (3, 4, or 5) E27/E26 sockets, allowing for multi-bulb lighting. This product is ideal for increasing brightness in various applications such as home lighting, chandeliers, wall lamps, photo lighting, and workshop lighting. It features a stable connection and easy installation, expanding your lighting options.
Safety Warnings
Failure to follow these safety warnings may result in electric shock, fire, or personal injury.
- Electrical Safety: For indoor dry use only; do not use in damp or outdoor environments.
- Power Limit: Total single bulb ≤ 60W to prevent overheating and fire. Do not exceed the total rated power of the splitter to avoid overheating.
- Operation Safety: Do not touch the splitter or bulbs during operation due to high temperature.
- Installation Safety: Do not disassemble, modify, or forcibly twist the product.
- Fire Safety: Keep away from flammable materials such as cloth, paper, and plastic.
Product Information
Image: E27/E26 Multi-Bulb Lamp Holder Splitter (3-in-1 and 4-in-1 versions shown)
| Item | Details |
|---|---|
| Product Name | E27 1-to-3 / 1-to-4 / 1-to-5 Lamp Holder Splitter |
| Function | Convert single E27 socket to 3/4/5 E27 sockets for multi-bulb lighting |
| Material | High temperature resistant plastic (PBT Housing) + copper conductive contacts |
| Compatible Base | Standard E27 screw socket (input & output), also compatible with E26 |
| Application | Home lighting, chandeliers, wall lamps, photo lighting, workshop lighting |
| Features | Stable connection, easy installation, expandable lighting source, increase brightness |
| Environment | Indoor dry place only |
Technical Specifications
| Parameter | Specification |
|---|---|
| Input | E27 Male Thread |
| Output | 3 × E27 / 4 × E27 / 5 × E27 Female Sockets |
| Rated Voltage | AC 110V - 240V |
| Rated Current | ≤ 2A |
| Max. Total Power | ≤ 180W |
| Max. Per Socket | ≤ 60W |
| Working Temperature | -20°C ~ 180°C |
| Protection Class | IP20 |
| Flame Retardant | V-0 level |
For more detailed specifications, you may refer to the User Manual (PDF).
Installation Steps
Before you begin, ensure the power supply is completely turned off.
- Turn off the power supply completely before installation.
- Screw the male E27 end of the splitter clockwise into the original lamp holder until tight.
- Screw E27 bulbs into each output socket clockwise until firmly fixed.
- Restore power and check if all bulbs light up normally.
Image: Illustration of the E27/E26 Multi-Bulb Lamp Holder Splitter installation process.
Operation
Once installed, the E27/E26 Multi-Bulb Lamp Holder Splitter operates by simply turning on the power supply to the original lamp holder. All connected bulbs will illuminate simultaneously. Ensure that the total wattage of all bulbs does not exceed the maximum total power of the splitter (≤ 180W) and that each individual bulb does not exceed 60W.
Maintenance & Storage
| Item | Operation Method |
|---|---|
| Cleaning | Turn off power and cool fully; wipe with a dry cloth only. |
| Inspection | Regularly check for cracks, deformation, or poor contact. |
| Storage | Store in a dry, cool, and dust-free environment. |
| Replacement | Stop use immediately if cracked, burnt, or damaged. |
Troubleshooting
| Fault Phenomenon | Possible Cause | Solution |
|---|---|---|
| Bulbs not lighting | Loose installation or power failure | Reinstall splitter and bulbs tightly |
| Flickering | Poor contact or oxidized threads | Clean contacts and screw firmly again |
| Overheating | Overloaded total power or poor ventilation | Reduce bulb power and improve heat dissipation |
User Tips
- This splitter is designed to be stationary. The individual lamp sockets are fixed and do not swivel or adjust.
- Consider using this product in areas where increased brightness from a single light source is desired, such as kitchens or workshops.
- Always ensure bulbs are screwed in firmly to prevent flickering or poor contact.
Warranty and Support
This E-SIMPO product comes with a 3-year warranty. For warranty claims or technical support, please contact the E-Simpo Store directly. Ensure you retain your purchase receipt as proof of purchase.
For further assistance, you can refer to the comprehensive User Manual (PDF).