bonacell RH-518 Wired Game Controller

1. Introduction

Thank you for choosing the bonacell RH-518 Wired Game Controller. This controller is designed to enhance your gaming experience on PlayStation 5, PlayStation 4, and PC platforms. It features a responsive touchpad, dual vibration motors, a 6-axis gyro sensor, and programmable buttons for versatile gameplay. Please read this manual carefully before use to ensure proper operation and to keep it for future reference.

Figure 1: bonacell RH-518 Wired Game Controller

2. Device Layout

Familiarize yourself with the buttons and features of your controller:

Figure 2: Controller with labels for PlayStation 5, PlayStation 4, Steam Deck, and PC compatibility.

• R1/R2 & L1/L2: Shoulder and Trigger Buttons
• Touchpad: Capacitive dual-point touchpad
• SHARE Button: For sharing gameplay content
• L3/Left Stick: Left analog stick (press for L3)
• Cross Key (D-pad): Directional input
• OPTIONS Button: Access in-game menus
• R3/Right Stick: Right analog stick (press for R3)
• Turbo Button (T): Activates rapid-fire mode
• PS Button: System menu access
• PR/PL Buttons: Programmable rear buttons
• SET Button: For macro programming
• Headphone Jack: 3.5mm stereo jack for audio

3. Setup

3.1. Connecting to PlayStation 5 (PS5)

1. Ensure your PS5 console is powered on and booted up.
2. Plug the controller's USB-C cable directly into an available USB port on your PS5 console.
3. The controller will automatically connect and be ready for use.

3.2. Connecting to PC

1. Power on your PC.
2. Connect the controller to your computer via the USB-C cable.
3. The PC will automatically install the necessary drivers. The controller defaults to original PS5 mode.
4. To switch to XINPUT (PC360) mode, press and hold the SHARE and OPTIONS keys simultaneously for 3 seconds.

Figure 3: Wired connection ensures lower latency and stability. Cable features nylon wrapping and double-layer protection.

4. Operating Instructions

4.1. TURBO Function

The TURBO function allows for rapid-fire input, giving you a competitive edge.

1. To Activate: Press and hold any desired function key (e.g., X, Square, Circle, Triangle, R1, L1, etc.), then press the Turbo (T) button. The selected function key will now operate in rapid-fire mode.
2. To Deactivate: Press and hold the function key that has the TURBO function active, then press the Turbo (T) button again. The rapid-fire mode for that key will be canceled.

Figure 4: Activate Turbo function for rapid-fire gameplay.

4.2. MACRO Programming Function

The controller features programmable buttons (PR/PL) for advanced operations.

1. Enter Programming Mode: Press and hold the SET button for 3 seconds. The 'P' indicator light will flash slowly, and the controller motor will vibrate, indicating it's in programming mode.
2. Record Macro: Press any sequence of function keys you wish to record (e.g., Up, Down, Left, Right, X, Circle, Square, Triangle, L1, L2, L3, R1, R2, R3). The macro can record a maximum of 16 key presses.
3. Assign and Save Macro: After recording your sequence, press either the PL or PR button. The motor will vibrate, and the 'P' indicator will remain solid, confirming that the macro has been successfully assigned to the chosen programmable button.

Figure 5: Programmable rear buttons (PR, PL) for custom commands.

4.3. Clear Macro Programming Function

To clear a previously programmed macro:

1. Enter Programming Mode: Press and hold the SET button for 3 seconds. The 'P' indicator light will flash slowly, and the controller motor will vibrate.
2. Clear Macro: Press either the PL or PR button (the one with the macro you want to clear). The 'P' indicator will remain solid, and the motor will vibrate, confirming that the macro setting has been canceled for that button.

5. Maintenance

• Keep the controller clean by wiping it with a soft, dry cloth.
• Avoid storing the product in humid or high-temperature environments.
• Do not expose the controller to direct sunlight or heat sources.
• Prevent liquids from entering the controller, as this can damage internal components.
• Do not drop, hit, or apply excessive force to the controller.

6. Troubleshooting

6.1. Controller Not Recognized on Smart Android TV

• Confirm that the USB interface on your smart Android TV is functioning correctly.
• Ensure the power supply to your smart Android TV is sufficient, as insufficient power can lead to unstable USB voltage.
• Try unplugging the controller from the current USB port on your TV and connecting it to another USB port.

6.2. Controller Not Usable in Game

• Verify if the game itself supports controller peripherals. Some games may only support keyboard/mouse input.
• Access the game's settings and configure the Gamepad options before attempting to use the controller.

6.3. Gamepad Not Vibrating

• Check if the game you are playing supports vibration feedback.
• Ensure that the vibration function is enabled within the game's settings or the console/PC's controller settings.

7. Specifications

Figure 6: Built-in 6-axis gyro sensor for motion control and dual vibration motors for immersive feedback.

Figure 7: Features include Hall design joysticks for no drift, high-quality buttons for tactile feel, and Hall-effect linear triggers with less than 0.1mm response interval.

8. User Tips

• Hall Effect: This controller features Hall Effect technology for both triggers and thumbsticks, providing precise and drift-free control.
• PS5 Game Compatibility: The controller is designed to work with PS5 games, not just PS4 games played on a PS5.
• PC Mode Switching: Remember to switch between original PS5 mode and XINPUT (PC360) mode on PC by holding SHARE+OPTIONS for 3 seconds, depending on game compatibility.

9. Precautions

• Do not store this product in humid or high-temperature environments.
• Avoid physical damage: Do not knock, beat, stick, pierce, or attempt to disassemble the product.
• Keep away from liquids: Prevent water or other liquids from entering the Gamepad.
• Do not charge or store the Gamepad near fire or other heat sources.
• Do not place heavy objects on the product.
• Avoid touching the port with bare hands or inserting foreign objects into the port.
• Unauthorized disassembly will void the warranty.
• Children should use this product under adult supervision.

10. Warranty and Support

For technical support, warranty services, or to download the latest drivers, please refer to the QR code provided on the cover of the original PDF manual. Keep your purchase receipt for warranty claims. The warranty card in the original manual can be used to record service details.