1. Product Overview
The KuWFi CAT4 Outdoor 4G LTE Router CPF909 is designed to provide robust and wide-range wireless internet connectivity in outdoor environments. It supports 4G LTE networks, offers 2.4G Wi-Fi at up to 300Mbps, and can support up to 64 users simultaneously. Its IP65 rating ensures durability against outdoor elements.
Video: KuWFi CAT4 Outdoor 4G LTE Router Product Overview and Assembly.
Package Contents
- KuWFi CAT4 Outdoor 4G LTE Router CPF909
- Detachable Antennas (2)
- PoE Power Adapter (24V 0.5A)
- Ethernet Cable
- Mounting Bracket and Accessories
- Quick Guide (Z_3.0)
2. Setup Guide
2.1 SIM Card Installation
- Unscrew the bottom cap of the router to access the ports.
- Locate the SIM card slot. This router uses a Standard SIM Card. Ensure you are using the correct size.
- Carefully insert the Standard SIM card into the slot until it clicks into place.
- Replace the bottom cap, ensuring it is securely tightened to maintain the IP65 weather resistance.

Image: Detail of SIM card slot, showing the correct Standard SIM card type.
2.2 Antenna Attachment
- Screw the two detachable antennas onto the designated connectors at the top of the router.
- Ensure they are finger-tight to establish a good connection.
2.3 Power Connection (PoE)
The router is powered via Power over Ethernet (PoE) using the provided PoE adapter.
- Connect one end of an Ethernet cable to the LAN/PoE port on the router.
- Connect the other end of the Ethernet cable to the 'PoE' port on the PoE adapter.
- Connect another Ethernet cable from the 'LAN' port on the PoE adapter to your computer or local network switch.
- Plug the power adapter into a standard electrical outlet.

Image: Diagram illustrating the Power over Ethernet (PoE) connection setup.
2.4 Mounting Options
The router can be mounted using the provided bracket for pole or wall installation.
- Pole Mounting: Use the bracket and included zip ties or clamps to secure the router to a pole.
- Wall Mounting: Use screws to attach the bracket to a wall, then slide the router onto the bracket.

Image: Visual guide for locking the holder, pole mounting, and wall mounting.
3. Operating Instructions
3.1 LED Indicators
The router features several LED indicators to show its status:
- WiFi: Indicates Wi-Fi status.
- 4G: Indicates 4G LTE network status.
- SYS: System status indicator.
- LAN1/LAN2: Status for LAN ports.
- PWR: Power status indicator.
3.2 Accessing the Web Interface
To configure the router, access its web-based management interface:
- Ensure your computer is connected to the router via Ethernet (through the PoE adapter's LAN port) or Wi-Fi.
- Open a web browser and enter the default IP address:
192.168.1.254 - When prompted, enter the default login credentials:
- Username: admin
- Password: admin
- Upon successful login, you will be directed to the router's configuration page.

Image: Product label showing default IP, SSID, password, and WiFi PIN.
3.3 Initial Configuration
It is highly recommended to change the default administrator password immediately after your first login for security reasons.
- Quick Setting: Follow the on-screen wizard for basic internet setup.
- Change Administrator Password: Navigate to the system settings to update your login password.
- Basic Function Setting: Configure essential network parameters.
- Advanced Settings: Explore options for network, security, and system configurations as needed.
3.4 Wi-Fi Connection
To connect devices to the router's Wi-Fi network:
- Default SSID: wireless-4EB0C1
- Default WiFi PIN: 12345678
You can change the SSID and password through the web interface for better security and personalization.
4. Maintenance
To ensure optimal performance and longevity of your KuWFi CPF909 router:
- Regular Cleaning: Periodically wipe the exterior of the device with a soft, dry cloth. Do not use liquid cleaners.
- Firmware Updates: Check the manufacturer's website for any available firmware updates. Keeping the firmware updated can improve performance, add new features, and enhance security.
- Environmental Protection: While the device is IP65 rated for outdoor use, avoid placing it in locations with extreme temperatures or direct, prolonged exposure to harsh weather conditions if possible.
5. Troubleshooting
- No Power: Ensure the PoE adapter is correctly connected to the router and a power outlet. Check the PWR LED.
- No 4G Signal: Verify the SIM card is correctly inserted and active. Check the 4G LED. Try repositioning the router for better signal reception. Ensure your SIM card supports the router's frequency bands (see Specifications).
- No Internet Access: Check the 4G signal. Log into the web interface (192.168.1.254) to verify network settings and APN configuration.
- Wi-Fi Not Connecting: Ensure Wi-Fi is enabled on the router and your device. Double-check the Wi-Fi password (PIN).
- Slow Speed: Check 4G signal strength. Reduce the number of connected devices if exceeding 64 users.
- Forgot Admin Password: If you forget the administrator password, you may need to perform a factory reset. Refer to the full user manual for instructions on how to perform a factory reset.
6. Specifications
| Feature | Specification |
|---|---|
| Model | CPF909 |
| Wi-Fi Transmission Standard | 802.11b, 802.11g, 802.11n |
| 2.4G Wi-Fi Transmission Rate | 300 Mbps |
| Wi-Fi Supported Frequency | 2.4G |
| Max. LAN Data Rate | 300Mbps |
| Wired Transfer Rate | 10/100Mbps |
| WAN Ports | 1 x 10/100Mbps |
| LAN Ports | 2 |
| CAT4 4G Download Speed | Up to 150Mbps |
| CAT4 4G Upload Speed | Up to 50Mbps |
| USIM Slot | Standard SIM Card Slot |
| Supports WPS | No |
| Supports WDS | No |
| Function | Firewall |
| Application | Outdoor |
| With Modem Function | Yes |
| Type | Wireless |
| Power Supply | PoE 24V 0.5A / DC 12V 1A |
| IP Rating | IP65 |
| Dimensions (Main Body) | Length: 19.7cm, Width: 3.9cm |
| Antenna Length | 15.2cm |
| Total Length (with antennas) | 35cm |
| Weight | 0.418 kg |
Supported 4G/3G/2G Bands (EU Version)
Applicable to Europe, Africa, Asia, and other regions.
- 4G LTE FDD: B1/B3/B7/B8/B20 (2100/1800/2600/900/800MHz)
- 4G LTE TDD: B38/B39/B40/B41 (2600/1900/2300/2500MHz)
- 3G WCDMA: B1/B8 (2100/900MHz)
- 2G GSM: B3/B8 (1800/900MHz)

Image: Product features highlighting IP65 rating and supported 4G LTE bands.

Image: Router dimensions and visual representation of mounting methods.
7. User Tips
- Check Band Compatibility: Before purchasing or using, verify that the router's supported 4G LTE bands are compatible with your local network provider's frequencies for optimal performance.
- Power Supply Flexibility: The router supports both 24V PoE and 12V DC power input, offering flexibility in deployment.
- High User Capacity: With support for up to 64 concurrent users, this router is suitable for small to medium-sized outdoor gatherings or business environments.
- Easy Setup: The device is designed for 'plug and play' with a standard SIM card, making initial setup straightforward.
8. Warranty and Support
For warranty information, technical support, or further assistance, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
A detailed user manual in PDF format is available for download: KuWFi CPF909 User Manual (PDF)