Pampsee T5

Contents

Pampsee LED Headlight Bulb Instruction Manual

Model: T5

1. Product Overview

The Pampsee T5 LED Headlight Bulbs are designed to provide superior illumination for motorcycles, scooters, and other vehicles. Featuring a focused beam pattern, high brightness, and durable construction, these bulbs are an upgrade for various socket types.

Pair of Pampsee T5 LED Headlight Bulbs with yellow light output comparison

Figure 1: Pampsee T5 LED Headlight Bulbs and their illumination pattern.

2. Setup and Installation

2.1 General Precautions

  • When installing H1/H3/880/881 models, exercise caution to avoid abrasion of the LED chips.
  • For buckle split structure products, avoid frequent up and down adjustments to maintain the elasticity of the clips.
  • Avoid touching the lamp beads directly with hands or hard objects during installation to prevent damage.

2.2 Installation Steps

The Pampsee T5 LED Headlight Bulbs feature a 1:1 plug-and-play design for easy installation, typically completed within 5 minutes. The wireless, in-line plug-in design eliminates the need for complex wiring.

5 Minutes Easy Installation, 1:1 Plug & Play comparison with halogen bulb

Figure 2: Easy 5-minute, 1:1 Plug & Play installation.

Simple Instant Plug-in, Wireless vs Wired installation comparison

Figure 3: Wireless, in-line plug-in design for hassle-free installation.

Refer to the following diagrams for specific installation procedures based on your bulb socket type:

LED Headlight installation diagram showing steps for various bulb types

Figure 4: Installation steps for LED Headlight Bulbs.

  1. For H1, H3, H4, H7, H13, 9004, 9007 Models (6 steps):
    1. Remove the original bulb.
    2. Insert the LED bulb base into the housing.
    3. Secure the bulb with the retaining clip.
    4. Connect the power connector.
    5. Adjust the bulb angle if necessary (up to 15 degrees rotation).
    6. Ensure the bulb is firmly seated.
  2. For H11, 9005/HB3, 9006/HB4, 9012 Models (5 steps):
    1. Remove the original bulb.
    2. Insert the LED bulb into the housing.
    3. Twist to lock the bulb in place.
    4. Connect the power connector.
    5. Adjust the bulb angle if necessary.

Note: Depending on your car's assembly, you may need to rotate the socket and adjust the fixed metal parts to achieve the optimal light angle.

3. Operating Instructions

These LED headlight bulbs provide a super focused light output, designed to illuminate the road effectively without dark areas or glare.

Perfect Beam Pattern showing super focused light output, no dark area, no glare, with far and near light comparison

Figure 5: Perfect beam pattern for clear visibility.

3.1 Light Modes and Performance

  • Brightness: 8000 Lumens for super bright illumination.
  • Color Temperatures: Available in 3000K (Golden), 6000K (Cold White), and 12000K (Blue) to suit various driving conditions and preferences.
  • Beam Type: Provides both far (long-range) and near (short-range) illumination with a concentrated output.
8000 Lumen Super Brightness comparison with halogen and other lights

Figure 6: Superior brightness compared to standard halogen bulbs.

3.2 All-Weather Performance

The bulbs are designed with IP68 waterproofing, ensuring normal operation in various weather conditions, including rain, snow, fog, and dusty environments.

Full Waterproof IP68, operating temperature -40°C to 150°C, showing performance in rain, snow, fog, dust

Figure 7: IP68 waterproof rating for reliable performance in extreme conditions.

4. Maintenance

To ensure optimal performance and longevity of your LED headlight bulbs, follow these maintenance guidelines:

  • Regular Cleaning: If operating in dusty environments for extended periods, regularly clean the bulbs and surrounding areas to prevent buildup.
  • Fan Cleaning (if applicable): For models with active cooling, regularly clean the fan to ensure efficient heat dissipation. These bulbs feature a fanless design for silent and maintenance-free operation.
  • Lifespan: These LED bulbs have a lifespan of over 50,000 hours, significantly longer than traditional halogen bulbs, reducing the need for frequent replacements.
Say Goodbye to Frequent Substitution, comparing 50000H lifespan of LED vs 300H of halogen

Figure 8: Extended lifespan of LED bulbs reduces replacement frequency.

4.1 Cooling System

The bulbs incorporate an efficient cooling system made of high-conductivity aviation aluminum, ensuring intelligent temperature control and a longer lifespan. The fanless design provides silent and comfortable operation.

Efficient Cooling System with silent, fanless, intelligent temperature control

Figure 9: Advanced fanless cooling system for durability and quiet operation.

5. Troubleshooting

  • Dashboard Warning Lights: These bulbs are designed to be compatible with 99% of vehicles without triggering dashboard warnings. If a warning light appears after installation, ensure the bulbs are correctly seated and your vehicle's electrical system is compatible with LED upgrades. Some sensitive vehicles may require a CANbus decoder (not included) to prevent error messages.
  • Polarity: The bulbs are designed with no polarity, simplifying installation and reducing potential wiring issues.
  • Radio Interference: The design minimizes radio interference, ensuring clear audio reception.
  • Bulb Flashing or Overheating: The fan circuit (if applicable) is designed for independent temperature control. If the ambient or bulb body temperature exceeds 75°C, the fan will run at high speed. If the bulb flashes regularly, it may indicate that the internal assembly temperature is too high (above 90°C) or there is abnormal engine heat. Check for proper ventilation around the bulb.
Suitable for 99% of vehicles, no warnings, no polarity, no radio interference

Figure 10: Compatibility features to prevent common issues.

6. Specifications

FeatureSpecification
Brand NamePampsee
ModelT5
Socket TypesH7, H8, H9, H11, 9005, 9006, 5202
Lumen Output8000Lm
Color Temperature3000K (Golden), 6000K (Cold White), 12000K (Blue)
Waterproof LevelIP68
Work Voltage9-35V DC
MaterialAviation Aluminum
Viewing Angle360 degrees
Placement on VehicleLeft, Right, Front
UsageFog Light
Lifespan>50,000 Hours
Operating Temperature-40°C to 150°C
Package Weight0.07 kg
Package Dimensions (L x W x H)9 cm x 9 cm x 5 cm

7. Warranty and Support

7.1 Warranty Information

This product comes with a 1-year warranty from the date of purchase, provided it is used appropriately and without overhaul. If a service technician identifies a product problem as belonging to our company, warranty service will be provided.

For international customers, warranty service can be obtained by sending a video documenting the product's issues. Please keep the serial number clear and complete during the video review process.

Warranty Card and Certificate of Approval

Figure 11: Warranty Card and Certificate of Approval.

7.2 Additional Resources

A detailed user manual with further information and diagrams is available in PDF format. You can access it via the following link: User Manual (PDF).

8. User Tips

  • Beam Focus: These bulbs provide a super focused light output, which is excellent for projecting light far down the road. If you require a wider, more diffused light pattern typically associated with traditional fog lights, consider the concentrated beam characteristic during use.
  • Error Messages: While designed for broad compatibility, if your vehicle displays a dashboard warning light after installation, ensure the bulbs are correctly seated. Some vehicles with sensitive CANbus systems may require an additional CANbus decoder (not included) to prevent error messages.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.