1. Introduction
Thank you for choosing the DESLOC A100F Keyless Entry Door Lock. This smart deadbolt offers multiple unlocking methods including fingerprint, PIN code, and traditional mechanical keys, providing enhanced security and convenience for your home. Please read this manual carefully before installation and use to ensure proper function and longevity of your lock.
2. Safety Information
- Do not attempt to disassemble or repair the lock yourself. Refer to qualified personnel for service.
- Keep mechanical keys in a safe and accessible location outside your home, but not inside the property secured by the lock.
- Change the default Master PIN code immediately after installation.
- Avoid exposing the lock to extreme temperatures or direct sunlight for prolonged periods, although it is designed for outdoor use within specified temperature ranges.
- Ensure all batteries are inserted correctly according to polarity markings.
- Do not use corrosive cleaners or abrasive materials on the lock's surface.
3. Package Contents
Verify that all components are present before beginning installation:
- Exterior Lock
- Front Rubber Pad
- Mounting Plate
- Interior Lock
- Deadbolt
- Reset Tool
- Strike Plate
- Mechanical Key (5 included)
- Deadbolt/Strike Plate Screws
- Mounting Plate Screws
- Interior Lock Screws (2 types)
- 4 AA Batteries
4. Lock Body Overview
Familiarize yourself with the different parts of the lock:
5. Specifications
| Feature | Detail |
|---|---|
| Batteries | 4 x AA |
| Working Temperature | -30°C ~ 70°C (Not Condensation) |
| Door Thickness | 35~50mm |
| Material | Zinc Alloy |
| Unlock Mechanism | Fingerprint/Key/Password |
| Password Groups | 99 Groups |
| Fingerprint Groups | 50 Groups |
| Relative Humidity | <95% |
| Waterproof Rating | IP54 |
6. Installation
A detailed user manual in PDF format is available for comprehensive installation instructions. You can reference it here: User Manual (PDF).
6.1 Door Compatibility
Before installation, ensure your door meets the following requirements:
- Door Thickness: 1-3/8" to 2" (35mm-50mm)
- Hole Diameter (Cross-bore): 2-1/8" (54mm)
- Backset Size: 2-3/8" or 2-3/4" (60mm or 70mm)
- Suitable Door Types: Wooden Door, Steel Door, Other (Single Cylinder type)
Deadbolt Adjustment: If your deadbolt requires adjustment (e.g., for a 70mm backset), turn the faceplate 180° to extend its length.
6.2 Installation Steps
Follow these steps for proper installation:
- Fix the Deadbolt: Fix the deadbolt with 2 deadbolt screws and keep it retracted. Ensure the word "TOP" on the deadbolt is facing up.
- Attach Exterior Lock: Attach the exterior lock to the front rubber pad and secure it onto the door.
- Route Paddle and Cable: Make sure the paddle is slid through the deadbolt and the cable threaded through the door hole.
NOTE: Route the cable below the deadbolt. The deadbolt must be in the unlock position, and the paddle must be in 'horizontal' status. - Fix Mounting Plate: Peel the tape off the mounting plate and ensure the cable through the door is positioned near the mounting plate. Then, fix the exterior lock with 2 screws. You can fix screws selectively.
- Insert Cable and Paddle: Insert the cable into the wire connector and ensure it is properly and securely installed. Insert the paddle into the hole at the back of the thumb turn.
NOTE: When pressing the indoor panel against the door, try to conceal the wires inside the door or place them in the designated wire-housing areas on the indoor panel. - Fix Back Body: Open the battery cover. Fix the back body to the mounting plate with 3 screws.
- Install Batteries: Place 4 AA batteries in position and close the battery cover.
NOTE: Insert AA batteries into the interior assembly while the door is locked. - Set Lock Direction: This lock requires the deadbolt to be engaged to identify the open direction. Please make sure the deadbolt is engaged after installation.
NOTE: If the deadbolt is retracted, a red light will flash, accompanied by a sound alarm to indicate that the lock's opening direction is not set. Please rotate the thumb turn to engage the deadbolt and set the opening direction.
7. Operation
The DESLOC A100F offers multiple ways to unlock and manage access:
Watch this video for a demonstration of the DESLOC A100F's features, installation, and various unlocking methods.
7.1 Basic Functions
- Low Battery Alarm: The lock will emit 6 short beeps and flash a red light 6 times when batteries are low.
- Lockout for Incorrect PIN: After 3 unsuccessful PIN code entries, the keypad will be locked for 180 seconds, accompanied by a light flash and an alarm.
- Reset Lock: Press the reset button (located on the interior lock, see 'Reset Lock' diagram in the PDF manual) for 3 seconds. You will hear 1 long beep and see a blue light flash once, followed by 3 short beeps and a red light flashing 3 times. After a reset, the lock restores to factory default settings: Master PIN code reverts to 123456, and all User PIN codes and User fingerprints are erased.
7.2 PIN Code Management
The factory default Master PIN code is 123456. It is highly recommended to change this immediately after installation.
- Change Master PIN Code:
- Enter
123456 +
- Press
4 +
- Enter New Master PIN code (6 digits)
+
- Repeat New Master PIN code (6 digits)
+
- Enter
- Add User PIN Code (up to 98 codes):
- Enter Master PIN code
+
- Enter
1 +
+ 1 + 
- Enter ID number (02-99)
+
- Add User PIN code (4-9 digits)
+
- Repeat User PIN code (4-9 digits)
+
- Enter Master PIN code
- Delete Some User PIN Codes:
- Enter Master PIN code
+
- Enter
2 +
+ 1 + 
- Enter ID number (02-99)
+
- Enter Master PIN code
- Delete All User PIN Codes: (This will delete user PIN codes but not the Master PIN code.)
- Enter Master PIN code
+
- Enter
3 +
+ 1 + 
- Enter Master PIN code
7.3 Fingerprint Management
The lock supports up to 50 user fingerprints.
- Add User Fingerprint:
- Enter Master PIN code
+
- Enter
1 +
+ 2 + 
- Enter ID number (01-50)
+
- Press your finger on the fingerprint reader 5 times until successful.
- Enter Master PIN code
- Delete Some User Fingerprints:
- Enter Master PIN code
+
- Enter
2 +
+ 2 + 
- Enter ID number (01-50)
+
- Enter Master PIN code
- Delete All User Fingerprints:
- Enter Master PIN code
+
- Enter
3 +
+ 2 + 
- Enter Master PIN code
- Delete All User PIN Codes and All User Fingerprints:
- Enter Master PIN code
+
- Enter
3 +
+ 3 + 
- Enter Master PIN code
7.4 Lock Modes
- Auto Lock Mode: The lock will automatically lock after a set duration.
- Enter Master PIN code
+
- Enter
5 +
- Enter duration (3-30 seconds)
+
- Enter Master PIN code
- Cancel Auto Lock Function: This programming will keep the door open all the time.
- Enter Master PIN code
+
- Enter
5 +
- Enter
00 +
- Enter Master PIN code
7.5 Sound Control
You can mute or unmute your lock (the feature is on by default).
- Turn Sound On/Off:
- Enter Master PIN code
+
- Enter
6 +
- To turn sound OFF, enter
1 +
- To turn sound ON, enter
2 +
- Enter Master PIN code
NOTE: When the lock is muted, you won't hear any beeping for programming, low battery alerts, or system alerts.
8. Light and Sound Indication
| Event | Lock Response |
|---|---|
| Unlock/Correct Setting | 1 short beep and blue light flashing |
| Lock | 2 short beeps and red light flashing |
| Incorrect Entry/Operation Error | 1 short beep and red light flashing |
| Wrong PIN Code Entry 3 Times | 3 long beeps and red light flashing 3 times |
| Low Voltage | 6 long beeps and red light flashing 6 times |
| Power On | 1 long beep and 3 short beeps, and then blue light flashing |
| Latch Alarm | When the door is not completely closed, the lock will continuously make two long beeps and flashing red LED for reminding |
9. Maintenance
- Cleaning: Clean the lock's surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
- Battery Replacement: Replace all four AA batteries when the low battery alarm sounds. Always use new, high-quality alkaline batteries.
- Fingerprint Sensor: Keep the fingerprint sensor clean and dry for optimal performance. Wipe it gently with a soft cloth if it appears dirty.
- Keypad: Ensure the keypad is free from dirt or debris that might obstruct button presses.
10. Troubleshooting
- Lock not responding: Check if the batteries are dead. Replace them if necessary. If the lock is completely unresponsive, use the mechanical key or connect a Type-C power bank to the backup power port.
- PIN code not working: Ensure you are entering the correct PIN code. If you've forgotten it, perform a factory reset (see Section 7.1) and reprogram.
- Fingerprint not recognized: Ensure your finger is clean and dry, and placed correctly on the sensor. Try re-registering your fingerprint if issues persist.
- Lock is loose: Check all mounting screws and tighten them if necessary.
- Door not locking/unlocking smoothly: Check for any obstructions in the door frame or deadbolt path. Ensure the deadbolt is properly aligned.
11. User Tips
- Regularly Change PINs: For enhanced security, consider changing your Master and User PIN codes periodically.
- Test Fingerprints: After adding new fingerprints, test them multiple times to ensure reliable recognition.
- Keep Mechanical Keys Accessible: Always keep at least one mechanical key in a secure location outside your home for emergency access, especially in case of battery failure.
- Monitor Battery Life: Pay attention to the low battery alerts and replace batteries promptly to avoid being locked out.
- Clean Sensor Regularly: A clean fingerprint sensor ensures quick and accurate recognition.
12. Warranty & Support
The DESLOC A100F Keyless Entry Door Lock comes with a 12-month warranty from the date of purchase.
For technical support, warranty claims, or any inquiries, please contact us:
- Website: www.desloc.com
- Email: support@desloc.com
- Phone: +1 (888) 572 6136