RACBOX 3.0 Inch Hella 3R G5 Bi Xenon Projector Lens LED Headlight Bulb

Contents

RACBOX 3.0 Inch Bi-Xenon Projector Lens LED Headlight Bulb User Manual

Model: 3.0 Inch Hella 3R G5 Bi Xenon Projector Lens LED Headlight Bulb

Batch/Serial Number: 001

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your RACBOX 3.0 Inch Bi-Xenon Projector Lens LED Headlight Bulbs. Please read this manual thoroughly before use to ensure proper function and safety.

1.1. Product Overview

The RACBOX LED Headlight Bulbs are designed as an auxiliary accessory for automotive lighting, intended for the normal replacement and upgrade of original car lights. They are compatible with 3.0 Inch Hella 3R G5 Bi Xenon Projector Lenses and are suitable for use with D1S, D1R, D2S, D2R, D3S, D3R, D4S, D4R Xenon bulb types. These products meet relevant national automotive lighting industry standards and have undergone strict quality testing.

The projector lens features a clear glass lens and a metal reflective cup for bright and clear light. Its bi-xenon design allows for both high and low beam functions, controlled by a high-quality anti-seize motor for durability and long lifespan.

The B3 LED bulbs offer a 6000K comfort daylight color temperature, stable cooling with a 12000RPM fan, and a plug-and-play design with a whole aluminum aviation grade shell for quick installation.

1.2. Manufacturer Information

Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com

EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND, info@apex-ce.com

2. Safety & Warnings

2.1. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Product Components and Features

Pair of 3.0 Inch Bi-Xenon Projector Lenses with LED bulbs
Figure 1: Pair of 3.0 Inch Bi-Xenon Projector Lenses with LED bulbs.
Internal components of the projector lens
Figure 2: Internal components of the projector lens, highlighting the clear glass lens, metal reflective cup, anti-seize motor, and bi-xenon design.
Key features of the LED bulb
Figure 3: Key features of the LED bulb, including 6000K color temperature, 12000RPM cooling fan, plug-and-play design, and aviation-grade aluminum shell.
Comparison of B3 LED vs HID Xenon start-up speed
Figure 4: Comparison showing B3 LED achieves 100% brightness in 0.1 seconds, while HID Xenon takes 6-10 seconds.

4. Specifications

Attribute Value
Item Type 3inch Bi-Xenon Headlight Projector Lens
Brand Name RACBOX
Voltage 12 V
Color Temperature 6000K
Car Brand Compatibility Universal for Cars
Lens Size 3.0 Inch
Beam Pattern High Low Beam
Bulb Required (for projector) D1S D1R D2S D2R D3S D3R D4S D4R Xenon bulbs (LED bulbs are replacements for these types)
Origin Mainland China
Package Weight 1.02 kg
Package Dimensions 18 cm (L) x 12 cm (W) x 6 cm (H)

4.1. Product Dimensions

Detailed dimensions of the 3.0 Inch Bi-Xenon Projector Lens
Figure 5: Detailed dimensions of the 3.0 Inch Bi-Xenon Projector Lens (e.g., 70mm/2.7in lens diameter, 80mm/3in height, 102mm/4in length).
Dimensions of the B3 LED headlight bulb
Figure 6: Dimensions of the B3 LED headlight bulb (e.g., 40mm height, 42mm width), showing it's 1:1 size with HID Xenon lamp for easy replacement.
Dimensions of the adapter for the projector lens
Figure 7: Dimensions of the adapter for the projector lens (e.g., 65mm/2.5in outer diameter, 52mm/2in inner diameter, 15mm/0.6in thickness).

5. Installation Instructions

Professional installation is recommended for this product.

  1. Turn off the engine and ensure the lamp is cool before beginning installation.
  2. Disconnect the power connector of the original bulb.
  3. Remove the factory halogen bulb.
  4. Install the LED bulb into the headlight housing.
  5. Connect the LED driver and fix it properly.
  6. Reconnect the power and test the light function.
  7. Reassemble the headlight assembly.

Note: If the light does not turn on after installation, please reverse the plug polarity and retest.

Step-by-step installation guide for the LED bulb into the projector lens
Figure 8: Visual guide for LED bulb installation: 1. Fix the clip on the LED bulb. 2. Fix the LED bulb to the headlight. 3. Connect the wire plug to the LED bulb.

Video 1: Product overview and installation demonstration.

6. Operating Instructions

Once installed, the LED headlight bulbs will operate automatically with your vehicle's headlight system. The bi-xenon projector lens allows for switching between high and low beam functions.

6.1. Beam Patterns

High/Low beam pattern diagram
Figure 9: Diagram illustrating the light refraction for both high beam and low beam settings, showing the clear cut-off line to prevent blinding oncoming drivers.
Illustration of Left-Hand Drive (LHD) beam pattern
Figure 10: Example of a Left-Hand Drive (LHD) beam pattern, suitable for vehicles where the steering wheel is on the left (e.g., Russia, USA).

Ensure you select the correct Left-Hand Drive (LHD) or Right-Hand Drive (RHD) version of the projector lens based on your vehicle's configuration to ensure proper beam pattern and avoid dazzling other drivers.

7. Maintenance

The RACBOX LED Headlight Bulbs and projector lenses are designed for long-lasting performance with minimal maintenance.

  • Regularly check your headlight assembly for any signs of damage or loose connections.
  • Keep the lens surface clean from dirt, dust, and debris to maintain optimal light output. Use a soft, damp cloth for cleaning.
  • Avoid using harsh chemicals or abrasive materials on the lens or housing.
  • The LED bulbs feature an integrated cooling fan. Ensure the fan is not obstructed to prevent overheating.

8. Troubleshooting

  • Light does not turn on: Check all electrical connections. If the bulb still does not light up, try reversing the polarity of the plug. Ensure the bulb is correctly seated in the projector lens.
  • Flickering lights: This may indicate an unstable power supply or a compatibility issue with your vehicle's CANBUS system. Ensure your vehicle's electrical system is stable and consider using additional CANBUS decoders if flickering persists.
  • Dim light output: Check for any obstructions on the lens. Ensure the bulb is fully inserted and properly aligned within the projector.
  • Uneven beam pattern: Verify that the projector lens and bulb are correctly installed and aligned. Ensure you have the correct LHD/RHD version for your vehicle.

9. User Tips

  • Before purchasing, always verify the size of your existing headlight projector lens (e.g., 2.5 inch vs. 3.0 inch) to ensure compatibility with these 3.0 inch projector lenses.
  • Confirm the correct bulb type (e.g., D1S, D3S) required by your vehicle's projector to match with the compatible LED bulbs.
  • For optimal performance and safety, consider professional installation, especially if you are unfamiliar with automotive electrical systems.

10. Warranty & Support

For detailed warranty information and customer support, please refer to the official user manual PDF provided by the seller. This document contains comprehensive information regarding product guarantees and how to obtain assistance.

You can access the full user manual (PDF) here.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.