1. Product Overview
The WESA BZ-01-HEI is a versatile wall-mounted electrical component available as a rocker light switch or a power socket, designed for residential and commercial applications. It features a flame-retardant plastic panel and a classic push-button or socket design, adhering to EU standards. This manual provides essential information for safe installation, operation, and maintenance.


2. Safety Information
Before installation or use, please read and understand all safety instructions. Improper installation or use can lead to electric shock, fire, or personal injury.
- Always disconnect power at the circuit breaker or fuse box before installing or servicing the switch/socket.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Do not use if the product appears damaged.
- Ensure proper grounding where applicable.
- This product is designed for indoor use only.

3. Setup and Installation
The WESA switch/socket is designed for wall-mounted installation. Follow these general steps for installation. For detailed wiring diagrams and specific instructions, refer to the comprehensive user manual PDF.
- Power Disconnection: Turn off the main power supply to the circuit at the breaker panel. Verify power is off using a voltage tester.
- Prepare Wiring: Carefully strip the insulation from the ends of the electrical wires (Live, Neutral, Ground, if applicable) according to local standards.
- Connect Wires: Connect the wires to the appropriate terminals on the back of the switch/socket. Refer to the wiring diagram below for guidance. Ensure all connections are secure.
- Mounting: Insert the switch/socket into the wall box. Secure it using the provided screws or mounting clips.
- Attach Faceplate: Snap or screw the decorative faceplate onto the mounted switch/socket.
- Restore Power: Turn the main power supply back on at the breaker panel.
- Test Functionality: Test the switch/socket to ensure it operates correctly.


For a comprehensive guide including detailed wiring diagrams and safety precautions, please refer to the official user manual PDF: View User Manual (PDF)
4. Operating Instructions
Operating the WESA wall rocker switch or socket is straightforward:
- Rocker Switch: Press the top or bottom of the rocker switch to toggle the connected light or appliance ON or OFF.
- Socket: Insert the plug of your appliance into the socket. Ensure the plug is fully inserted for a secure connection.
5. Maintenance
To ensure the longevity and proper functioning of your WESA switch/socket, follow these maintenance guidelines:
- Cleaning: Wipe the surface with a soft, dry cloth. For stubborn marks, use a slightly damp cloth with mild soap, then dry thoroughly. Avoid abrasive cleaners or solvents.
- Inspection: Periodically check for any visible damage, loose connections, or signs of wear. If any issues are found, disconnect power and consult a qualified electrician.
- Avoid Overloading: Do not exceed the rated current (16A) for sockets to prevent overheating and potential damage.
6. Troubleshooting
If you encounter issues with your WESA switch or socket, consider the following common troubleshooting steps:
- No Power to Device/Light:
- Check the circuit breaker or fuse box to ensure the power is ON for that circuit.
- Verify that the device or light fixture itself is working by testing it in another outlet or with another switch.
- Ensure all wiring connections are secure (only if you are qualified to inspect electrical wiring).
- Switch Not Responding:
- Ensure the switch is properly installed and not loose in the wall box.
- If the switch feels unusually stiff or loose, it may indicate internal damage. Discontinue use and replace.
- Socket Not Providing Power:
- Test the socket with a different appliance to rule out appliance malfunction.
- Check for tripped GFCI (Ground Fault Circuit Interrupter) outlets or breakers in the circuit.
If problems persist after these steps, consult a qualified electrician.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | WESA |
| Model Number | BZ-01-HEI |
| Item Type | SWITCHES |
| Switch Type | Push Button Switch |
| Current Rating | 16A |
| Material | Plastic (Flame Retardant) |
| Features | Wall mounted |
| Certification | RoHS, LVD, CE |
| Origin | Mainland China |
| Package Weight | 0.086 kg |
| Package Dimensions (L x W x H) | 10 cm x 10 cm x 5 cm |
8. Warranty and Support
The WESA BZ-01-HEI switch/socket comes with a 10-year warranty, ensuring long-term reliability and performance. For technical support, detailed product information, or warranty claims, please refer to the official user manual PDF or contact your retailer.
9. User Tips
- Professional Installation: For optimal safety and performance, especially with complex wiring, consider having the switch/socket installed by a certified electrician.
- Aesthetic Integration: The simple and modern design of the WESA switch allows for seamless integration into various interior styles, from modern to classic.
- Regular Checks: Periodically check the switch/socket for any signs of wear or damage, particularly if it's in a high-traffic area.