1. Product Overview
The INKBIRD WiFi Gateway and Bluetooth Temperature Humidity Sensor Set (IBS-M2S-B with 3x ITH-11-B) offers a comprehensive solution for remote monitoring of indoor and outdoor temperature and humidity. This system provides gateway networking, historical data checking, and timely alarm notifications, enabling you to maintain up-to-date environmental information and take appropriate action when necessary.
The set includes:
- 1 x WiFi Gateway (IBS-M2S-B)
- 3 x Temperature-Humidity Sensors (ITH-11-B)
- 6 x AAA Batteries
- 3 x Lanyards
- 1 x Label Stickers
- 1 x User Manual (this document)

Figure 1: Product components and app interface

Figure 2: Key features of the Wireless Thermo-Hygrometer Set
2. Specifications
2.1 IBS-M2S-B WiFi Gateway (Receiver)
- Input Voltage: AC 100~240V 50/60Hz
- Longest Bluetooth Transmission Distance: up to 80m / 262ft (without interference)
- Number of ITH-11-B Sensors Supported: up to 10 sensors simultaneously
2.2 ITH-11-B BLE Sensor (Transmitter)
- Power Source: 2 x AAA/3.0V batteries (included)
- Battery Life: 9 months
- Temperature Measurement Range: -40℃~60℃ (-40°F~140°F)
- Temperature Display Accuracy: 0.1°C (0.1°F)
- Temperature Measurement Accuracy: ±0.2°C (±0.36°F)
- Humidity Measurement Range: 0%~99% RH
- Humidity Measurement Accuracy: ±2% RH (non-condensing)
- Humidity Display Accuracy: 1%
- Temperature-Humidity Sampling Period: 3 seconds
- Waterproof Rating: IP65
- Warranty: 1 Year
3. Product Diagram
3.1 IBS-M2S-B WiFi Gateway

Figure 3: IBS-M2S-B WiFi Gateway
3.2 ITH-11-B Bluetooth Sensor

Figure 4: Dimensions of IBS-M2S-B Gateway (left) and ITH-11-B Sensor (right)
4. Key Definitions (IBS-M2S-B WiFi Gateway)
- WiFi Indicator: Shows the status of the WiFi connection.
- WiFi Button: Press and hold for 5 seconds to reset the WiFi pairing. After resetting, follow the pairing steps to reconnect to the WiFi network.
- Reset Button: Press and hold for 5 seconds to unbind all sensors. After unbinding, follow the connection steps to rebind each sensor.
5. Setup
5.1 APP Installation
Search for the "INKBIRD" App on Google Play or the App Store, or scan the QR code below to download it directly.
Figure 5: QR Code for INKBIRD App Download
Notes:
- Your iOS devices must be running iOS 12.0 or above to download the app smoothly.
- Your Android devices must be running Android 7.1 or above to download the app smoothly.
- The device supports a 2.4GHz Wi-Fi router only.
- APP Location Permission Requirement: The app requires location information to discover and add nearby devices. INKBIRD ensures your location information is kept strictly confidential and is only used for the app's location function.
5.2 Registration
- Open the app, select your Country/Region, and a verification code will be sent to you.
- Enter the verification code to confirm your identity, and the registration is complete.
5.3 ITH-11-B Bluetooth Sensor Battery Installation
When using the ITH-11-B sensor for the first time, open the back cover and remove the insulating strip from the battery compartment. Ensure the batteries are installed with the correct polarity (+ and - signs). Then replace the back cover. It is recommended to thread the lanyard before replacing the cover for convenience.
Video 1: Demonstrates battery installation and initial setup of the ITH-11-B sensor.

Figure 6: Battery installation for ITH-11-B sensor. Note the 9+ months super long battery life with included 2 AAA batteries (1200mAh).
5.4 Connecting the Devices
There are two methods to connect the ITH-11-B Bluetooth sensor to the IBS-M2S-B gateway.
Connection Method 1: Adding sensors via the gateway's App page
- Firstly, plug in the IBS-M2S-B WiFi Gateway and start it up correctly. Then follow the App installation and registration steps to establish the App connection. If the app connection has already been completed, skip this step.
- Secondly, install the battery of the ITH-11-B Bluetooth sensor (as described in 5.3), start it up correctly, and place it as close as possible to the IBS-M2S-B WiFi Gateway.
- Open the INKBIRD app and click the "+" icon on the top right corner to add a device. The app will search for nearby devices. Select the relevant device (ITH-11-B) and click "add" or "confirm" to add it. The sub-device will automatically establish a connection.
Note: If adding the device fails, repeat steps 1-3 to complete the addition.

Figure 7: One IBS-M2S-B gateway can connect to 10 INKBIRD Bluetooth thermo-hygrometers simultaneously, with an 80m/262ft open distance.
Connection Method 2: Binding the gateway from the sensor's App settings page
- First, insert the batteries correctly into the ITH-11-B Bluetooth sensor, switch it on, and place it as close to your smartphone as possible.
- Secondly, open the INKBIRD app and click "+" on the top right corner to find and add the ITH-11-B Bluetooth sensor. Follow the instructions in the app to establish a Bluetooth connection.
- Thirdly, plug in the IBS-M2S-B WiFi Gateway and start it up correctly. Then follow the App installation and registration steps to establish the App connection. If the app connection has already been completed, skip this step.
- Finally, place the ITH-11-B Bluetooth sensor as close to the gateway as possible. Enter the sub-device setting page in the app, go to the "Bind" page, select the gateway, and then the ITH-11-B Bluetooth sensor will automatically establish a connection with the gateway.

Figure 8: WiFi + Bluetooth Dual Mode Remote Monitoring setup. Bluetooth 5.0 offers 80m/262ft open distance, while WiFi 2.4G provides unlimited connection distance.
6. Operating the Device and App
6.1 Monitoring Data
Once connected, you can view temperature, humidity, VPD (Vapor Pressure Deficit), and dew point data directly from the INKBIRD app. The app displays data graphs to provide insight into environmental changes.

Figure 9: App interface for checking all data including temperature, humidity, dew point, and VPD.
6.2 Personalizing Settings and Alarms
The app allows you to personalize various settings for your sensors:
- Change temperature unit (℃/℉).
- Set high/low temperature and humidity alarms.
- Change the data recording interval (1, 2, 5, or 10 minutes).
- Calibrate temperature and humidity readings.
With a WiFi connection, you will receive instant notifications for high/low temperature alarms, high/low humidity alarms, and low battery alarms directly on your smartphone, no matter your location.

Figure 10: Example of an app notification for high humidity.
6.3 Data Storage and Export
- The ITH-11-B thermo-hygrometer can save up to 300 days of offline data.
- The IBS-M2S-B gateway can store 1-year historical data in the cloud.
- The smartphone app can save an unlimited amount of historical data, which can be exported via email.
6.4 Wide Range of Applications
The compact and lightweight design, along with the IP65 waterproof function, makes the ITH-11-B sensor suitable for various indoor and outdoor environments, including:
- Homes
- Baby rooms
- Refrigerators
- Reptile terrariums
- Greenhouses
- Wine cellars
- Courtyards
- RVs
- Incubators
- Outdoor activities

Figure 11: Diverse applications of the INKBIRD sensor.
7. Maintenance
7.1 General Care
- Do not disassemble the product if you are not a professional.
- Ensure the sensor is not covered with dust, as dust may lead to inaccurate measurements.
- Do not use alcohol to clean the sensor.
7.2 Battery Replacement
The ITH-11-B sensor uses 2 AAA batteries. When the battery level is low, replace them following the instructions in section 5.3. The sensor is designed for 9 months of continuous monitoring on a single set of batteries.
8. Troubleshooting Guide
| Issue | Possible Solutions |
|---|---|
| The gateway cannot connect to the network | a. Make sure the 2.4GHz WiFi signal is stable, and place the WiFi gateway as close to the router as possible. b. Make sure there are as few barriers as possible between the WiFi gateway and the router. c. Enable Bluetooth and positioning functions, allow the App to obtain location information, and allow the local network (iOS System). |
| Unable to add sub-devices | Reset the WiFi gateway and the registration of ITH-11-B Bluetooth sensors. Remove and reinstall the battery of the ITH-11-B Bluetooth sensor, and then try again to add sub-devices. |
| ITH-11-B Bluetooth sensor is offline. | a. ITH-11-B Bluetooth sensor is out of power. b. The ITH-11-B Bluetooth sensor is too far away from the gateway or there are obstacles between them. Move the sensor as close as possible to the gateway. |
| Incorrect temperature/humidity detection | Leave the sensor in a ventilated place for one day, and be careful not to block the sensing area. |
9. User Tips
- Gateway Connection: Ensure the gateway is connected to a stable 2.4GHz WiFi network. If experiencing issues, check for network blocks and consider using a VPN for initial registration if necessary.
- Bluetooth Range: When connecting sensors directly via Bluetooth to a smartphone without the gateway, be aware that the range may be significantly reduced. For extended range and remote monitoring, ensure the sensors are connected through the WiFi gateway.
10. Important Notes & Warnings
- Pay attention to the safe use of electronic products and keep children away.
- Do not disassemble the product if you are not a professional.
- Be sure that the sensor is not covered with dust as dust may lead to inaccurate measurements.
- Do not use alcohol to clean the sensor.
10.1 FCC Requirement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
10.2 IC Warning
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference received, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
11. Warranty & Customer Support
This item carries a 1-year warranty against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of INKBIRD, be either repaired or replaced without charge. For any problems in use, please feel free to contact us at support@inkbird.bird.com. We will do our best to help you.
Manufacturer: Shenzhen Inkbird Technology Co., Ltd.
Office Address: Room 1803, Guowei Building, No.68 Guowei Road, Xianhu Community, Liantang, Luohu District, Shenzhen, China
Factory Address: 6th Floor, Building 713, Pengji Liantang Industrial Area, No.2 Pengxing Road, Luohu District, Shenzhen, China