Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your TYLZA 15-inch Beverage Cooler (Model TYBC100). Please read this manual thoroughly before using the appliance to ensure safe and efficient operation. Keep this manual for future reference.
Important Safety Information
To reduce the risk of fire, electric shock, or injury when using your appliance, follow these basic precautions:
- Read all instructions before using the appliance.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- This appliance is intended to be used in household and similar applications.
- Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- Do not damage the refrigerant circuit.
- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Setup and Installation
Unpacking
Carefully remove all packaging materials. Ensure all components are present and undamaged. Keep packaging materials away from children.
Placement
Your TYLZA beverage cooler is designed for both freestanding and built-in under-counter installation. Choose a location that is well-ventilated and away from direct sunlight or heat sources.
Ensure adequate clearance around the unit for proper ventilation, especially if built-in. The built-in front vent design allows for flush installation.
Leveling the Appliance
The cooler is equipped with adjustable feet to ensure it is perfectly level on any surface. Adjust the feet by turning them clockwise or counter-clockwise until the appliance is stable and level.
Electrical Connection
Before plugging in the appliance, ensure the voltage matches the rating label. Allow the unit to stand upright for at least 2-4 hours before connecting it to power to allow the refrigerant to settle.
Door Reversal (if applicable)
The door hinge is reversible. If you wish to change the door swing direction, refer to the detailed instructions in the full PDF manual (if available) or contact customer support.
Operating Instructions
Control Panel Overview
The smart touch control panel is located at the top of the cooler door. It features intuitive controls for various functions:
- Light Button: Controls the internal LED lighting.
- Temperature Lock: Locks the control panel to prevent accidental changes.
- °C/°F Button: Toggles between Celsius and Fahrenheit temperature display.
- Increase Temp (+): Increases the set temperature.
- Decrease Temp (-): Decreases the set temperature.
- ON/OFF Button: Powers the unit on or off.
Setting the Temperature
- Press the ON/OFF button to turn on the cooler.
- Use the (+) or (-) buttons to adjust the desired temperature. The display will show the set temperature.
- The smart temperature sensor will automatically adjust the cooling process to maintain the set temperature efficiently.
Temperature Memory Function
The cooler is equipped with a temperature memory function. In case of a power outage, the unit will automatically revert to the last set temperature once power is restored.
Loading the Cooler
Arrange beverages on the removable wire racks. Ensure proper air circulation by not overcrowding the shelves. The racks are designed for easy removal and adjustment.
Door Lock
The cooler features a door key lock located at the bottom to secure your beverages and prevent accidental access, especially by children.
Maintenance and Care
Cleaning the Interior
Unplug the appliance before cleaning. Use a soft cloth with a mild, non-abrasive cleaner to wipe down the interior surfaces. The removable wire racks can be washed with warm soapy water.
Cleaning the Exterior
Wipe the exterior with a soft, damp cloth. For stainless steel surfaces, use a stainless steel cleaner. Avoid harsh chemicals or abrasive pads.
Door Seal Maintenance
Regularly check and clean the high elastic sturdy door seal to ensure it remains free of debris and maintains a tight seal, which is crucial for energy efficiency.
Defrosting
This appliance features an automatic defrost system. However, if excessive frost builds up, manually defrost the unit by unplugging it and allowing the frost to melt. Collect melted water and wipe the interior dry before restarting.
Power Saving Tips
- Avoid opening the door frequently.
- Ensure the door seal is clean and intact.
- Do not place the cooler near heat sources.
- Keep the condenser coils clean (located at the back or bottom, depending on the model).
Troubleshooting Guide
Before contacting customer service, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not operate. | Not plugged in; circuit breaker tripped; power outage. | Ensure plug is secure; check circuit breaker; verify power supply. |
| Temperature is not cold enough. | Door not closed properly; excessive door openings; warm items added; poor ventilation; temperature setting too high. | Check door seal; reduce door openings; allow time for new items to cool; ensure proper clearance; lower temperature setting. |
| Appliance is noisy. | Unit not level; items vibrating inside; normal compressor operation. | Adjust leveling feet; rearrange items; some noise from compressor/fan is normal. The unit features a super quiet compressor. |
| Door does not close properly. | Unit not level; door gasket dirty/damaged; shelves out of place. | Level the unit; clean/inspect gasket; ensure shelves are correctly positioned. |
Specifications
| Feature | Detail |
|---|---|
| Model | TYBC100 |
| Installation Method | Self-contained (Built-in or Freestanding) |
| Appearance | Modern Style |
| Door Type | Double Layer Tempered Glass Door (UV protection) |
| Handle Material | Stainless Steel Metal Handle |
| Control Type | Smart Touch Control Panel |
| Compressor | High-efficiency, low noise, low vibration |
| Temperature Sensor | Smart Temperature Sensor |
| Special Features | Temperature Memory Function, Door Key Lock, Adjustable Feet, Removable Wire Racks, Front Vent Design |
| Dimensions (Approx.) | Front View: 15.76" W x 33.46" H Side View: 24.13" D Top View: 14.96" W x 23.03" D |
User Tips
- For optimal cooling, allow the cooler to reach the desired temperature before loading it with beverages.
- When installing as a built-in unit, ensure sufficient space for the front ventilation to operate effectively.
- Utilize the temperature lock feature on the control panel to prevent accidental temperature changes, especially in high-traffic areas or homes with children.
- Regularly check the door seal for any gaps or damage to maintain energy efficiency and consistent cooling.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the manufacturer or your retailer. Ensure you have your model number (TYBC100) and proof of purchase available.
For additional information, you may refer to the official product page or contact customer service.
