1. Introduction
The VISHRT Industrial Endoscope is a portable, high-quality, multifunctional detection system featuring a full-color 4.3-inch IPS screen. It offers powerful video recording functions, capable of capturing 2.0MP images (JPG) and 1080P HD videos (AVI), which can be stored on a TF card. This industrial endoscope is designed for non-destructive testing in complex environments, allowing inspection and observation in areas inaccessible to the human eye. It is particularly useful for automotive engine pipelines and mechanical parts, facilitating diagnosis and processing without dismantling components.
Figure 1: Industrial Endoscope with illuminated probe and coiled cable.
2. Safety Warnings and Precautions
- Warning! Read all safety warnings and instructions before using this product. Failure to follow these warnings and instructions may result in product damage.
- Do not disassemble the product yourself. For malfunctions, contact customer service.
- Prevent objects and liquids from entering the device. Liquid will damage the electronic components and circuit boards.
- Do not use in high-temperature environments to avoid damage to the lens. The product's operating temperature range is -10°C to 50°C.
- If mist appears on the endoscope lens due to weather, turn on the image and run it for about 20 minutes until the image clears.
- The lens may become hot during use, especially when the LED light is at its brightest. This is normal and will not affect the operation or service life of the endoscope.
- Store the device in a dry place when not in use.
- Industrial endoscopes are not suitable for medical use.
3. Product Features
- Full-color high-definition IPS screen for real-time test video viewing.
- Front camera and side camera resolution up to 1080P for image capture and video recording.
- Supports TF card for file storage.
- Over-the-horizon lens technology with a visual distance of 5-500cm.
- Adjustable LED light for use in dark environments.
- IP67 waterproof rating.
Figure 2: IPS Full Color Monitor for accurate color restoration.
Figure 3: High-density curved surface technology for clear display on the 4.3-inch screen.
4. Setup
4.1. Component Overview
Familiarize yourself with the main components of your industrial endoscope:
- Menu/Back Button
- Up/Rotate Image Button
- Down/Rotate Image Button
- OK Button
- Take Pictures/Videos Button
- LED Brightness Adjustment
- Power On/Off Button
- TF Card Slot
- Work Indicator Light
Figure 4: Main unit with 8mm single lens and 4.3-inch IPS screen.
4.2. Inserting the TF Card
To store images and videos, a TF card (MicroSD card) must be inserted. Ensure the device is powered off before inserting or removing the TF card. Confirm the correct orientation of the TF card before inserting. Do not use excessive force to prevent damage to the card slot structure.
Figure 5: Inserting the TF card into the dedicated slot.
4.3. Powering On
Press and hold the Power On/Off button (7) to turn on the device. The screen will display the live feed from the camera.
5. Operating Instructions
5.1. Basic Navigation
- Menu/Return Button (1): Briefly press to enter the menu interface.
- Up/Rotate Image Button (2): In the menu interface, this button functions as "Up". In the image interface, it functions as "Rotate".
- Down/Rotate Image Button (3): In the menu interface, this button functions as "Down". In the graphical interface, this button also functions as "Rotate".
- OK/Switch Button (4): In the menu interface, short press "OK" to confirm. In the image interface, long press the "OK" button to switch between front camera and side camera (only for dual lens cameras).
5.2. Capturing Images and Recording Videos
- Take Picture / Record Video Button (5): Short press to take a picture. Long press to start video recording, then short press again to stop recording.
- Deleting Files: Long press the Menu/Return button (1) for 3 seconds to delete the current video or photo.
5.3. Adjusting LED Brightness
Use the LED Brightness Adjustment (6) to control the illumination of the camera for optimal visibility in various environments.
5.4. Visual Demonstration
Video 1: Demonstration of endoscope operation, including power-on, light adjustment, focus testing on an eye chart, inspection of an engine part, and waterproofing test in a sink.
6. Maintenance
- Cleaning the Lens: If the endoscope lens produces mist, turn on the device and allow it to run for approximately 20 minutes until the mist clears.
- Storage: Store the endoscope in a dry place when not in use to prevent damage.
- Water Resistance: The camera probe is IP67 waterproof, allowing it to be used in wet environments or submerged in water for inspection. However, ensure the main unit and connections remain dry.
7. Troubleshooting
- Mist on Lens: If the endoscope lens fogs up, power on the device and operate it for about 20 minutes. The mist should dissipate.
- Lens Getting Hot: It is normal for the lens to become warm during operation, especially when the LED lights are at maximum brightness. This does not affect the device's performance or lifespan.
- Device Not Powering On: Ensure the battery is charged. If the issue persists, contact customer service.
- No Image on Screen: Check that the camera cable is securely connected to the main unit.
8. Specifications
8.1. Screen
- Screen Type: IPS display
- Screen Size: 4.3 inches
- Camera Resolution: 1920*1080
- Video Resolution: 1280*720
- Port: Type-C charging port, TF memory card slot
8.2. Camera
- Camera Diameter: Single camera, dual camera, or triple camera options available.
- Camera Resolution: 2 million pixels
- Viewing Angle: 70°
- Best Focal Length: 50-80mm for front lens, 20-50mm for side lens (for dual camera).
Figure 6: Comparison of available lens sizes and configurations.
Figure 7: Internal view of Single, Dual, and Triple Lens 1080P HD Camera configurations.
8.3. Other Parameters
- Working Temperature: 0-45°C
- Battery: 2000mAh
- Working Time: 2.5 hours
- Charging Time: 2 hours
9. User Tips
- For optimal clarity, ensure the lens is clean before each use.
- When inspecting very dark areas, gradually increase the LED brightness to avoid overexposure.
- Utilize the rotate function to adjust the image orientation for better viewing, especially in confined spaces.
- Regularly check the TF card for available storage space to ensure you can capture all necessary images and videos.
10. Warranty and Support
For detailed warranty information, technical support, or service inquiries, please refer to the official user manual PDF or contact VISHRT customer service.
A comprehensive user manual in PDF format is available for download: View User Manual (PDF)