WESA MZ-01-BM

Contents

WESA MZ-01-BM Wood Wall Mounted Switch User Manual

Model: MZ-01-BM | Brand: WESA

1. Product Overview

The WESA MZ-01-BM is a stylish and functional wood-grain wall-mounted rocker switch, designed to meet EU standards. Crafted from flame-retardant plastic, it combines a classic aesthetic with modern safety features. This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your switch or socket unit.

WESA MZ-01-BM Wood Wall Mounted Rocker Switch

Image: WESA MZ-01-BM single rocker switch with wood-grain finish.

Video: A 12-second product showcase demonstrating the WESA MZ-01-BM switch rotating to show its design and rear mounting plate.

2. Specifications

AttributeValue
Brand NameWESA
Model NumberMZ-01-BM
Item TypeSWITCHES
Switch TypePush Button Switch
Current16A
MaterialPlastic
FeaturesWall mounted
CertificationRoHS, LVD, CE
Warranty10 years
OriginDe(origin)
Package Length13 cm
Package Width12 cm
Package Height5 cm
Package Weight0.121 kg

3. Installation and Wiring

3.1 Safety Precautions

  • Always turn off the main power supply at the circuit breaker before attempting any electrical installation.
  • If you are unsure about electrical wiring, consult a qualified electrician.
  • Ensure all connections are secure and properly insulated.
  • Do not exceed the rated current of 16A.

3.2 Mounting the Switch/Socket

  1. Turn off the power supply.
  2. Carefully remove the existing switch/socket or prepare the wall box for installation.
  3. Connect the wires according to the appropriate wiring diagram below.
  4. Secure the switch/socket unit to the wall box using screws.
  5. Attach the faceplate.
  6. Restore power and test the functionality.

3.3 Wiring Diagrams

Refer to the diagram below for specific wiring configurations. Ensure correct connection of Live (L), Neutral (N), and Earth (E) wires as applicable to your unit type.

Dimensional drawings and wiring diagrams for WESA switches and sockets

Image: Dimensional drawings and wiring diagrams for 1 Gang 1 Way Switch, 2 Gang 1 Way Switch, 1 Socket No Ground, 1 Socket with Ground, 2 Socket No Ground, and 2 Socket with Ground.

3.3.1 1 Gang 1 Way Switch / 2 Gang 1 Way Switch Wiring

  • Connect the Live (L) input wire to the switch's L terminal.
  • Connect the output wires (L1, L2, L3) from the switch to the respective light fixtures.
  • Ensure the Neutral (N) wire is connected directly to the light fixtures.

3.3.2 1 Socket Not Ground Wiring

  • Connect the Live (L) wire to the L terminal of the socket.
  • Connect the Neutral (N) wire to the N terminal of the socket.

3.3.3 1 Socket with Ground Wiring

  • Connect the Live (L) wire to the L terminal of the socket.
  • Connect the Neutral (N) wire to the N terminal of the socket.
  • Connect the Earth (E) wire to the E terminal of the socket.

3.3.4 2 Socket Not Ground Wiring

  • Connect the Live (L) wire to the common L terminal for both sockets.
  • Connect the Neutral (N) wire to the common N terminal for both sockets.

3.3.5 2 Socket with Ground Wiring

  • Connect the Live (L) wire to the common L terminal for both sockets.
  • Connect the Neutral (N) wire to the common N terminal for both sockets.
  • Connect the Earth (E) wire to the common E terminal for both sockets.

4. Operation

The WESA MZ-01-BM switch operates as a standard rocker switch. Press the top part of the rocker to turn the connected device (e.g., light) ON, and press the bottom part to turn it OFF. For socket units, simply plug in your appliance and ensure the socket is receiving power.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to wipe the surface of the switch/socket. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
  • Inspection: Periodically check the switch/socket for any signs of damage, loose connections, or discoloration. If any issues are found, turn off the power and consult a qualified electrician.
  • Environmental Conditions: Ensure the switch/socket is installed in an environment within its specified operating conditions (e.g., temperature, humidity).

6. Troubleshooting

  • No Power to Device:
    • Check if the main power supply is ON.
    • Verify that the switch is in the 'ON' position.
    • Inspect wiring connections for looseness or damage (ensure power is OFF before inspection).
    • Test the connected device with another power source to rule out device malfunction.
  • Switch Not Responding:
    • Turn off power, then turn it back on after a few seconds.
    • If the issue persists, it may indicate an internal fault. Professional inspection is recommended.

7. User Tips

  • For a cohesive look, consider pairing switches and sockets from the same WESA wood-grain series.
  • Always ensure the wall box is adequately sized for the unit to prevent cramped wiring, which can lead to overheating or short circuits.

8. Warranty and Support

The WESA MZ-01-BM switch comes with a 10-year warranty from the date of purchase, covering manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

For further assistance or detailed technical information, you may refer to the official user manual PDF available online: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.