METALFISH Block Case

Contents

METALFISH BlockCase Aluminum Open Frame Case

User Manual

1. Product Overview

The METALFISH BlockCase is an aluminum open frame computer case designed for enthusiasts and builders who prioritize airflow, accessibility, and a unique aesthetic. It supports various motherboard form factors and offers flexible mounting options for GPUs and cooling solutions.

Two assembled METALFISH BlockCase open frame PCs, one with a vertical GPU and the other with a horizontal GPU and liquid cooling.
The METALFISH BlockCase in two configurations, showcasing vertical and horizontal GPU mounting.
METALFISH BlockCase features list: ATX/MATX Mainboard, GPU Mount Vertically, GPU Mount Horizontally, ATX/SFX PowerSupply, 180/240 Liquid Cooler, 2.5/3.5 Inch HDD.
Key features and supported components of the BlockCase.

2. Package Contents

Before assembly, please verify that all components listed below are present in your package.

Various components of the BlockCase laid out on a table, including aluminum profiles, screws, and brackets, next to an instruction sheet.
Unboxed components and the instruction manual.

Included Accessories:

  • Aluminum Profiles (various lengths for vertical bars and cross bars)
  • Handle
  • Mainboard Fixing Studs
  • Power Switch Panel
  • Alu FootPads
  • Plastic Cover
  • M4 Screws
  • M3 Screws (Threaded Inserts)
  • L-shaped Slide Nuts
  • Slide Nuts (for M4 screws)
  • GPU Bracket
  • Support Bracket
  • PSU Fixing Plate
  • Liquid Cooler/Fan Fixing Plate
  • HDD Fixing Plate
  • Fastening Screws

Each type of screw and small component is typically provided in a precisely labeled baggie for easy identification.

3. Setup and Installation

Follow these steps carefully for proper assembly of your BlockCase. Refer to the provided diagrams for visual guidance.

Close-up of BlockCase installation steps diagram showing aluminum profile location details, mainboard bracket installation, and base bracket installation.
Detailed installation steps for the BlockCase.

Step 1: Mainboard Bracket Installation

  1. Identify the aluminum cross bars: NO.1 CrossBar is for the top, and NO.2 CrossBar has three fixing positions.
  2. Install the mainboard studs onto the designated holes on the cross bars.
  3. Fix the vertical bars with the cross bars. Note the orientation: Hole#1 (closest to the edge) should have its end facing up.
  4. Position the mainboard according to its form factor:
    • Hole#2: For ITX mainboard position.
    • Hole#3: For M-ATX mainboard position.
    • Hole#4: For ATX mainboard position. If using ATX, ensure the cross bar is fixed in Hole 4.
  5. Secure the connections using the Threaded Insert M3 Screws. Ensure they are tightened properly.

Step 2: Install the Base Bracket

  1. Assemble the components for the case's base bracket, including the L-shaped Slide Nuts and Fastening Screws.
  2. Attach the base bracket to the main frame as shown in the diagram.

Step 3: Mainboard Bracket Fixed to the Base Bracket

  1. Align the groove insertions of the aluminum profiles.
  2. Use the fastening nuts to secure the mainboard bracket and the chassis bracket together.
  3. Ensure the groove insertion of the case bracket is properly aligned.
  4. Secure the mainboard bracket and base bracket. The mainboard bracket can be moved left or right to adjust its position before final tightening.

Component Installation

  • Motherboard: The case supports ATX, M-ATX, and ITX motherboards.
  • GPU: Graphics cards can be mounted either vertically or horizontally.
  • Power Supply: Compatible with ATX and SFX power supply units.
  • Cooling: Supports 180mm and 240mm liquid coolers. Dedicated fixing plates are provided for liquid coolers/fans.
  • Fans: Supports 9cm, 12cm, and 14cm fans.
  • Storage: Includes fixing plates for 2.5-inch and 3.5-inch HDDs.
Assembled METALFISH BlockCase with a vertical GPU, liquid cooler, and RGB lighting, viewed from the front-right.
An example of a fully assembled system with a vertical GPU mount.
Assembled METALFISH BlockCase with a horizontal GPU, liquid cooler, and RGB lighting, viewed from the front-left.
An example of a fully assembled system with a horizontal GPU mount.

4. Operating Your Open Frame PC

Once assembled, your open frame PC offers several advantages:

  • Superior Airflow: The open design allows for unrestricted airflow, which can lead to lower component temperatures compared to traditional enclosed cases.
  • Easy Accessibility: All components are easily accessible for upgrades, maintenance, or troubleshooting without needing to open side panels.
  • Showcase Your Build: The open frame design is ideal for showcasing high-end components, custom liquid cooling loops, and RGB lighting.

5. Maintenance

Maintaining an open frame case is crucial for longevity and performance.

  • Regular Dusting: Due to its open nature, dust accumulation can be more prominent. Regularly use compressed air or a soft brush to clean dust from components and the frame.
  • Check Connections: Periodically inspect all screws and connections to ensure they remain tight and secure.
  • Cable Management: While not enclosed, good cable management is still recommended for aesthetics and to prevent cables from interfering with fans or airflow.

6. Troubleshooting

If you encounter issues during or after assembly, consider the following:

  • Components Not Fitting: Double-check the orientation of aluminum profiles and brackets against the installation diagrams. Ensure you are using the correct mounting holes for your motherboard size.
  • Power Issues: Verify all power supply connections to the motherboard, GPU, and other components. Ensure the power switch panel is correctly wired.
  • Loose Connections: If components are unstable, re-tighten all screws and ensure all slide nuts are properly seated.
  • Missing Features: The included power switch panel does not typically include a reset button or power/HDD LEDs. These can be added separately by sourcing standard PC case buttons/LEDs and wiring them to your motherboard's front panel headers.

7. Specifications

FeatureSpecification
Brand NameMETALFISH
Model NumberBlock Case
Chassis TypeDesktops (Open Frame)
ApplicationDesktop
Form Factor (Motherboard)ATX, M-ATX, ITX
MaterialAluminum alloy, Steel
Case Size (L x W x H)260 x 200 x 340 mm
Case Weight1.8 kg
Internal 2.5" Drive Bays2
Internal 3.5" Drive Bays2
Radiator Size SupportUp to 240 MM
Power Supply MountedBottom
Power Supply SupportATX, SFX
GPU MountVertical or Horizontal
RGB Support (Case)No (components may have RGB)
With Power SupplyNo
With FanNo
With Side Panel WindowNo

8. User Tips

  • The open frame design provides excellent airflow, helping to keep your components cool during operation.
  • Enjoy easy access to all your PC's ports and internal components for quick adjustments or upgrades.
  • Consider adding a separate reset button and power/HDD activity LEDs if these features are desired, as they are not included with the standard power switch panel. Components from old cases can often be repurposed.
  • This case is highly suitable for use as a test bench or for showcasing your PC build due to its open and accessible nature.
  • The 2020 aluminum profiles used in the construction allow for extensive customization. You can design and 3D print additional mounting accessories for fans, GPU supports, custom power buttons, or extra storage drives.

9. Frequently Asked Questions (FAQ)

Q: Does this support ITX motherboards?
A: Yes, the installation diagram indicates support for ITX, M-ATX, and ATX motherboards.
Q: Is it the whole thing or just the mount?
A: This product is a complete open frame computer case kit, including all necessary aluminum profiles, brackets, and screws for assembly, not just a single mounting bracket.
Q: How many mm should the power button be?
A: The kit includes a standard power switch panel. If you wish to add a custom power button, reset button, or LEDs, standard PC case components can often be recycled or purchased separately. The exact dimensions for custom buttons are not specified, but standard PC case buttons are generally compatible with typical PC front panel headers.
Q: What is the total packaged weight?
A: The total packaged weight of the BlockCase is approximately 1.309 kg.

10. Warranty and Support

For detailed information regarding product warranty, returns, or technical support, please refer to the official user manual PDF or contact the seller directly.

A comprehensive user manual in PDF format is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.