1. Introduction
Thank you for choosing the Zigbee Temperature & Humidity Sensor. This device is designed to monitor environmental conditions in your home, providing real-time temperature and humidity data. It integrates seamlessly with Zigbee gateways and smart home platforms like Tuya Smart Life, and is compatible with voice assistants such as Amazon Alexa and Google Assistant.

2. Product Description
The sensor is a compact device designed for easy placement. It features a status indicator and a reset button for network configuration.

Dimensions

3. Specifications
| Attribute | Value |
|---|---|
| Item Name | Zibee Temperature & Humidity Sensor |
| Wireless Protocol | Zigbee 3.0 |
| APP Compatibility | Tuya & Smartlife |
| Battery Type | 2*AAA (not included) |
| Working Voltage | DC 3V |
| Quiescent Current | ≤30uA |
| Low Voltage Undervoltage | ≤2.7V |
| Working Temperature | -10°C ~ +50°C |
| Working Humidity | 10% - 90% RH |
| Wattage | 0.3W |
| Certification | CE |
4. Setup
4.1 Precautions
- Do not install the product outdoors, on an unstable base, or anywhere unprotected from rain.
- The installation surface should be smooth, flat, dry, and clean.
4.2 Battery Installation
- Open the battery cover.
- Install two AAA batteries (not included), paying attention to the correct positive (+) and negative (-) polarity.
4.3 Network Configuration (Pairing)
The Zigbee version product must be connected to a Zigbee gateway to function properly and upload data to the server APP.
- Power on the product: Ensure batteries are correctly installed.
- Quick Connection Mode:
- Press the RESET button for 5 seconds, then release.
- The status indicator LED will flash slowly.
- Follow the prompts in your Zigbee gateway app to add the device.
- Compatibility Mode (if quick connection fails):
- Press and hold the RESET button for 10 seconds, then release.
- The status indicator LED will flash quickly.
- Follow the prompts in your Zigbee gateway app to add the device.
4.4 Installation
Install the product on a wall using double-sided tape or place it in the desired measurement area. The installation position is for reference only; use the sticker to affix the product securely.

5. Operating Instructions
Once successfully paired with your Zigbee gateway and integrated into your smart home app (Tuya Smart Life recommended), the sensor will begin monitoring temperature and humidity.
5.1 Real-time Monitoring
View current temperature and humidity readings directly within the Tuya Smart Life app or your integrated smart home system (e.g., Home Assistant).

5.2 Alerts and Automation
Set custom alerts for low or high temperature/humidity thresholds within the app. The sensor can trigger notifications or automate other smart devices (e.g., turn on a humidifier via a smart plug) when these thresholds are met.

5.3 Voice Control
Integrate with Amazon Alexa or Google Assistant to query temperature and humidity information hands-free.

5.4 Data History
The app provides historical data and graphs for temperature and humidity, allowing you to track environmental changes over time.

6. Maintenance
6.1 Battery Replacement
The sensor uses 2 AAA batteries. When the battery level is low (indicated by ≤2.7V), replace them promptly to ensure continuous operation. Follow the battery installation steps in Section 4.2.
6.2 Cleaning
Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or immerse the device in water.
7. Troubleshooting
- Device not connecting/slow response:
- Ensure you have a Zigbee gateway and it is properly configured.
- Try re-pairing the device using the "Quick Connection Mode" or "Compatibility Mode" (Section 4.3).
- Check the distance between the sensor and the Zigbee gateway. Obstacles can affect signal strength.
- Verify that the batteries are correctly installed and have sufficient charge.
- Inaccurate readings:
- Ensure the sensor is not placed near heat sources (e.g., direct sunlight, heating vents) or sources of moisture (e.g., directly above a humidifier).
- Allow some time for the sensor to stabilize after initial setup or relocation.
- Note that some sensors may round temperature readings to whole degrees (e.g., 22°C instead of 22.3°C).
- Device not authorized: This message typically indicates a problem with the Zigbee network or gateway integration. Consult your gateway's manual or support.
- Cannot set temperature range: This functionality is typically managed within the Tuya Smart Life app's automation or scene settings, not directly on the sensor.
8. User Tips
- Home Assistant Integration: Many users report excellent compatibility with Home Assistant when using a Zigbee dongle (e.g., Sonoff Zigbee 3.0 USB dongle Plus E) and Zigbee2MQTT. The sensors are often recognized immediately.
- Battery Life: Zigbee sensors generally offer better battery life compared to Wi-Fi sensors. However, battery life can vary based on reporting frequency and environmental conditions.
- Accuracy: While generally accurate, some users note that temperature readings might be rounded to whole degrees in certain app interfaces. For precise monitoring, consider this characteristic.
- Automation: Leverage the Tuya Smart Life app's automation features to create rules based on temperature and humidity, such as triggering notifications or controlling other smart devices.
- Multiple Sensors: For comprehensive monitoring, consider deploying multiple sensors across different rooms. They tend to show consistent readings relative to each other.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download: User Manual (PDF).