Introduction
This manual provides instructions for the safe and efficient operation of your PINTUDY Mini UPS Router Optical Cat Adapter, Model DC1018L. This device serves as an uninterruptible power supply (UPS) for various low-power DC devices and can also function as a portable charging solution for mobile phones and other USB-powered gadgets.

Image: The Mini UPS device shown alongside a smartphone, highlighting its dual functionality as both an uninterruptible power supply and a portable charging solution.
Package Contents
Please check the package for the following items:
- 1 x PINTUDY Mini UPS (Model DC1018L)
- 1 x AC Power Cable
- Multiple DC Output Cables (various connectors)
- 1 x Screwdriver (for battery compartment)
- 1 x User Manual (this document or similar)

Image: A visual representation of the package contents, including the main UPS unit, various DC output cables, an AC power cable, a screwdriver, and the user manual.
Setup
Battery Installation
This device requires four 18650 lithium batteries (not included) for operation. Follow these steps for proper installation:
- Locate the battery compartment on the underside of the UPS unit. Use the provided screwdriver to open it.
- Insert four 18650 lithium batteries (standard voltage 3.7V) according to the polarity indicators inside the compartment.
- Ensure the battery discharge rate is not lower than 2C (2C/3C recommended).
- When installing multiple batteries, ensure that the voltage of all four batteries is consistent (error should be less than 0.05V) to prevent damage and ensure optimal performance.
- Close the battery compartment securely.

Image: A detailed view of the UPS's battery compartment, open to show the internal structure and battery slots. Text overlays provide critical instructions for inserting 18650 lithium batteries, emphasizing correct direction, discharge rate, and voltage consistency across batteries.
Connecting to Power and Devices
- Connect the AC power cable to the "INPUT 85-265VAC" port on the UPS and then to a wall outlet.
- Select the appropriate DC output voltage (5V, 9V, 12V, 15V, or 24V) using the selector switch or dedicated ports.
- Connect the appropriate DC output cable from the UPS to your device (e.g., router, optical modem, camera).
- For network devices, you can also use the POE (Power over Ethernet) or LAN ports if supported by your equipment.
Operating Instructions
Powering On/Off
Press the power button to turn the UPS on or off. Indicator lights will show the battery status.
Voltage Selection
The UPS offers multiple output voltages:
- Dedicated ports for 5V, 9V, and 12V.
- A selector switch for 15V and 24V outputs.
- A USB port for 5V output, suitable for charging mobile phones or other USB-powered devices.
Always ensure the selected voltage matches the requirements of your connected device to prevent damage.

Image: An overhead view of the Mini UPS, clearly displaying all its input and output ports, including RESET, POE, LAN, a voltage SELECTOR switch (for 15V/24V), USB, and dedicated DC output ports for 5V, 9V, and 12V, along with the AC input.
Uninterruptible Power Supply Function
When connected to AC power, the UPS will power your devices and charge the internal batteries. In the event of a power outage, the UPS will automatically switch to battery power, providing seamless operation for your connected devices like routers, optical modems, switches, access control systems, or cameras.

Image: The Mini UPS unit positioned in a setting that suggests continuous operation during a power failure, emphasizing its role in preventing disconnections for Wi-Fi and router equipment.
Maintenance
Battery Care
- To prolong battery life, avoid fully discharging the batteries frequently.
- If the UPS will not be used for an extended period, store it with a partial charge (around 50-80%) and recharge it every few months.
- Use only high-quality 18650 lithium batteries that meet the specified requirements.
Cleaning
Wipe the exterior of the UPS with a soft, dry cloth. Do not use liquid cleaners or solvents.
Troubleshooting
Device Not Powering On
- Ensure the 18650 batteries are correctly installed with proper polarity and are sufficiently charged.
- Verify that the AC power cable is securely connected to both the UPS and the wall outlet.
- Check if the power button has been pressed firmly.
Connected Device Not Receiving Power
- Confirm that the correct output voltage is selected on the UPS for your device.
- Ensure the DC output cable is securely connected to both the UPS and your device.
- Check if the connected device itself is functioning correctly.
Specifications
| Feature | Detail |
|---|---|
| Model | DC1018L |
| Brand | PINTUDY |
| Input Voltage | AC 85-265V, 50/60Hz |
| Output Voltage | DC 5V, 9V, 12V, 15V, 24V (selectable), USB 5V |
| Output Power | 18W (Max) |
| Battery Type | 4 x 18650 Lithium Batteries (3.7V, ≥2C discharge rate, NOT included) |
| Color | Black |
| Package Dimensions (L x W x H) | 21 cm x 19 cm x 5 cm |
| Package Weight | 0.543 kg |
User Tips
- Battery Quality Matters: For extended backup times, invest in high-capacity, reputable 18650 lithium batteries. Users have reported 8+ hours of backup with good quality batteries during outages.
- Batteries Not Included: Please note that this UPS does NOT come with integrated batteries. You will need to purchase and install four 18650 lithium batteries separately.
- Voltage Consistency: When installing multiple 18650 batteries, ensure their voltages are as close as possible (error less than 0.05V) to ensure balanced charging and discharging, which prolongs battery life and device performance.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact your seller or refer to the official product page. Keep your purchase receipt as proof of purchase.
A detailed user manual may also be available in PDF format: View User Manual (PDF)