ludengchaoshi XG-Ceiling fan lights

Contents

Modern LED Pendant Light Fixture User Manual

Model: XG-Ceiling fan lights

1. Introduction

This manual provides instructions for the safe installation, operation, and maintenance of your Modern LED Pendant Light Fixture. Please read this manual thoroughly before installation and use, and keep it for future reference.

2. Package Contents

Before installation, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with installation and contact customer support.

  • Main Light Fixture (1 PC)
  • Cross Mounting Plate (1 PC)
  • Expansion Tubes (4 PCS)
  • Self-tapping Screws (4 PCS)
  • Round Head Screws (4 PCS)
  • Ceiling Plate (1 PC)

3. Safety Information

  • Always turn off the power supply at the main circuit breaker before installation, maintenance, or cleaning.
  • Installation must be performed by a qualified electrician or in accordance with local electrical codes.
  • Ensure the mounting surface can support the weight of the fixture.
  • Do not connect the fixture to an ungrounded electrical system.
  • Keep children away from the installation area.

4. Setup and Installation

Refer to the diagram below for visual guidance during installation.

Installation Diagram for Pendant Light

Figure 1: Pendant Light Installation Steps

  1. Prepare Mounting Plate: Use the cross mounting plate to mark the drilling positions on the ceiling. Drill holes at the marked spots. Insert the expansion tubes into the drilled holes using a hammer.
  2. Secure Mounting Plate: Align the cross mounting plate with the expansion tubes. Secure it to the ceiling using the self-tapping screws and a screwdriver. Ensure it is firmly attached.
  3. Wiring: Connect the household electrical wires to the fixture's wires. Connect the neutral wire (usually blue or white) from the ceiling to the fixture's neutral wire. Connect the live wire (usually brown or black) from the ceiling to the fixture's live wire. Ensure all connections are secure and insulated.
  4. Adjust Height: Adjust the length of the steel suspension cables to achieve the desired height for the light fixture.
  5. Attach Ceiling Plate: Push the ceiling plate up against the ceiling, aligning its side holes with the holes on the cross mounting plate. Secure the ceiling plate using the round head screws and a screwdriver.
  6. Final Check: Ensure all components are securely fastened. Restore power to the circuit.

Important Notes for Installation:

  • Before installation, ensure the power is cut off.
  • Installation and maintenance must be carried out by professional technical personnel.

5. Operating Instructions

5.1 Control Methods

Pendant light showing wall control and remote control options

Figure 2: Two Control Methods

Your light fixture supports two primary control methods:

  • Wall Switch Control: Use your existing wall light switch to turn the fixture ON/OFF.
  • Remote Control: For models equipped with a remote control, use it to power ON/OFF, adjust brightness, and change color temperature.

5.2 Intelligent Poleless Dimming

Intelligent Poleless Dimming showing White, Neutral, and Warm light

Figure 3: Dimming Options

The fixture features intelligent poleless dimming, allowing you to freely control bright colors and brightness to suit your preference and create different atmospheres.

  • White Light: Provides a clear and bright light color, ideal for tasks requiring high visibility.
  • Neutral Light: Offers a comfortable natural light color, suitable for general illumination.
  • Warm Light: Creates a romantic and cozy atmosphere with its soft, warm glow.

Use the remote control (if provided) to cycle through these color temperatures and adjust brightness levels.

5.3 Height Adjustment

Pendant light with arrow indicating adjustable up and down height

Figure 4: Adjustable Height

The pendant light's height can be adjusted to best fit your space and aesthetic preference. During installation (Step 4), you can set the desired length of the suspension cables. If further adjustment is needed after installation, carefully loosen the cable grips at the ceiling canopy, adjust the cable length, and then re-secure the grips. Ensure the power is off before making any adjustments.

6. Maintenance and Care

  • Cleaning: Always turn off the power and allow the fixture to cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
  • Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
  • LEDs: This fixture uses integrated LED lights, which are not user-replaceable. If the LEDs fail, professional service may be required.

7. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.
  • No power to the fixture.
  • Loose wiring connection.
  • Faulty wall switch.
  • Check circuit breaker and wall switch.
  • Turn off power and check wiring connections.
  • Test wall switch or consult an electrician.
Remote control not working.
  • Dead batteries in remote.
  • Remote not paired (if applicable).
  • Obstruction between remote and fixture.
  • Replace remote control batteries.
  • Refer to remote pairing instructions (if any).
  • Ensure clear line of sight.
Light flickers.
  • Loose wiring.
  • Incompatible dimmer switch (if using a non-supplied dimmer).
  • Turn off power and check wiring connections.
  • Ensure dimmer switch is compatible with LED fixtures.

If you encounter problems not listed here or if solutions do not resolve the issue, please contact customer support.

8. Specifications

FeatureSpecification
Brand Nameludengchaoshi
Model NumberXG-Ceiling fan lights
Item TypePendant Lights
Installation TypeCord Pendant
Installation MethodSelf-Contained
StyleModern Style
Power SourceAC
Voltage90 - 260 V
Is DimmableYes
Switch TypeREMOTE CONTROL
Luminous Flux2000-82000 (lm)
Lighting Area5-10 square meters
MaterialMetal
Is Bulbs IncludedNo (Integrated LED)
Is Smart DeviceYes
CertificationCE, EMC, FCC, GS, ROHS
OriginMainland China

9. User Tips

  • Optimal Placement: For dining tables, ensure the light is centered and hung at a height that illuminates the table without obstructing views or causing glare.
  • Ambiance Control: Experiment with the different light temperatures (white, neutral, warm) and brightness levels to match the mood or activity in your room.
  • Remote Control Care: Keep the remote control in a safe place and replace batteries regularly to ensure consistent performance.

10. Warranty and Support

This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or replacement parts, please contact the seller or manufacturer directly. You may also refer to the original PDF user manual for additional details: View PDF User Manual.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.