Anbernic RG CubeXX

Contents

ANBERNIC RG CubeXX Handheld Game Console

User Manual

Introduction

This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your ANBERNIC RG CubeXX handheld game console. Please read this manual thoroughly before using your device to ensure optimal performance and longevity.

ANBERNIC RG CubeXX Handheld Game Console in White, Gray, and Black

The ANBERNIC RG CubeXX Handheld Game Console, available in multiple colors.

Package Contents

Ensure all items are present in your package:

  • ANBERNIC RG CubeXX Handheld Game Console
  • Type-C Charging Cable
  • User Manual (this document and a physical copy)
  • Gift Box
  • Linux 64-bit System (pre-installed)
Contents of the RG CubeXX box including console, Type-C cable, user manual, and gift box

Included accessories with the RG CubeXX.

Setup Guide

1. Charging the Device

Before first use, fully charge your RG CubeXX. Use the provided Type-C cable and a 5V/1.5A charger.

  • Red light (solid): Device is charging.
  • Green light: Device is fully charged.
  • Red light (twinkling): Battery is low.
  • Yellow light: Device is charging.
Internal view of the RG CubeXX showing the 3800mAh battery

The RG CubeXX features a 3800mAh battery for extended playtime.

2. Inserting a Memory Card

The device supports dual TF card slots (TF1/INT for internal storage, TF2/EXT for external storage).

  1. Ensure the memory card is formatted to FAT32.
  2. Carefully insert the memory card into the designated TF2/EXT slot.
  3. Upon insertion, the system will automatically create new folders for each supported game platform.

3. Initial Settings

Access the Settings menu from the main interface to configure your device.

  • Language Settings: Navigate to Settings > Language Settings. Available languages include Chinese, English, Japanese, Korean, Russian, French, German, Spanish, and Portuguese.
  • Backlight Brightness: Adjust screen brightness via Settings > Backlight Brightness (5 levels available).
  • Backlight Time: Set the screen timeout duration in Settings > Backlight Time (options: 1, 2, 5, 10 minutes, and always on).
  • Key Customization: Customize button mappings for the device and gamepad in Settings > Button Custom.
  • Joystick Light: Configure the 16 million color RGB joystick lighting effects (constant light, breath, rainbow, marquee, chasing, gaming) and adjust color/brightness via Settings > Joystick light.
High-precision dual joysticks with RGB lighting effects

Customize your joystick lighting with various RGB effects.

Operating Instructions

1. Main Interface Navigation

The main interface provides access to various functions:

  • Game Rooms: Select 'Internal Card' or 'External Card' and choose your desired game platform.
  • RA Game: Similar to Game Rooms, for RetroArch games.
  • Apps: Access video player, music player, e-book reader, file manager, and expert mode.
  • Favorites: Press the START button in the game center to add games to this section.
  • History: View recently played games. This list can be cleared in settings.
  • Search: Quickly find games. Use the X key to delete keywords and the Y key to confirm searches.
  • Settings: Access all device settings.

2. Game Buttons and Ports Overview

Diagram of RG CubeXX buttons and ports

Refer to the diagram for the layout of game buttons and ports.

  • D-Pad: Directional Pad for movement.
  • Left/Right Joysticks: Analog input for precise control.
  • Game Keys (A, B, X, Y): Action buttons.
  • L1/L2, R1/R2: Shoulder buttons.
  • MENU: Access system menu.
  • SELECT/START: Standard game control buttons.
  • VOL-/VOL+: Adjust volume.
  • Power Key: Turn device on/off.
  • RESET: Reset button.
  • HD Port: For connecting to an external display.
  • TF1/INT, TF2/EXT: Memory card slots.

3. Game Import

To play games, place your game files into the corresponding platform folders on your FAT32 formatted memory card (TF2/EXT slot).

The RG CubeXX supports a wide range of retro game formats:

Table of supported game formats including PSP, PS1, NDS, N64, GBA, MAME, and more

Supported game formats for the RG CubeXX.

Supported formats include: Ported games, PSP, PS1, SS, DC, NDS, N64, ARCADE, GBA, GBC, GB, SFC, FC, MAME, MD, GG, PCE, NGPC, SMS, WSC.

4. Game Settings (Display)

In the Game Settings menu, you can adjust the display quality:

  • Choose between high-definition, scan line, fast, or dot matrix display effects to suit your preference.

5. Game Streaming

Stream AAA games from your computer to the handheld:

  1. Ensure both the game console and your computer are connected to the same Wi-Fi network.
  2. On the RG CubeXX, navigate to Settings > Moonlight.
  3. Enter your computer's IP address to initiate pairing.
  4. Enter the PIN code displayed on your computer to successfully pair.
  5. Select 'Connect' to begin streaming.
  6. To exit streaming, press MENU + START.
Diagram showing multiple entertainment modes including handheld, streaming, screen casting, and multiplayer

The RG CubeXX supports various entertainment modes, including game streaming.

6. Bluetooth Settings

Connect Bluetooth accessories to your RG CubeXX:

  1. Go to Settings > Bluetooth Settings.
  2. Select 'Enable Bluetooth'.
  3. Press the X key to scan for available devices.
  4. Select the desired controller or accessory from the list to connect.

7. RA Emulator Shortcuts

Utilize these shortcuts within the RetroArch emulator for enhanced control:

Shortcut Function
MenuAccess RetroArch Menu
Menu + R2Fast Forward
Menu + L2Slow Motion
Menu + R1Save State
Menu + L1Load State
Menu + YDisplay Frame Rate
Menu + BScreenshot
Menu + XPause
Menu + STARTQuit Emulator
Menu + VOL+Adjust Brightness
Menu + Left/Right DirectionSelect Save State Slot

8. Online Play

To play online with another RG CubeXX console:

  1. Ensure both consoles are connected to the same Wi-Fi network.
  2. Note down the IP addresses of both consoles by navigating to NETWORK SETTINGS > IP ADDRESS.
  3. On both consoles, launch the same game within RetroArch.
  4. For Console A (Host): In the RetroArch menu, select Netplay > Host > Start Netplay Host.
  5. For Console B (Slave): In the RetroArch menu, select Netplay > Connect to Netplay Host, enter Console A's IP address, and press the START button to connect.

Maintenance

1. Battery Care

  • Avoid fully discharging the battery frequently.
  • Charge the device regularly, even if not in use, to maintain battery health.
  • Use only the provided Type-C cable and a compatible 5V/1.5A charger.
  • Do not expose the device to extreme temperatures.

2. Cleaning

  • Wipe the device with a soft, dry, lint-free cloth.
  • For stubborn marks, slightly dampen the cloth with water; avoid harsh chemicals.
  • Keep ports free of dust and debris.

3. Storage

  • Store the device in a cool, dry place away from direct sunlight.
  • If storing for an extended period, charge the battery to about 50% before storage.

Troubleshooting

  • Device not turning on: Ensure the battery is charged. Connect to a charger and check the indicator light.
  • Charging issues: Verify the Type-C cable and charger are working correctly. Check the charging indicator light status.
  • Games not appearing: Ensure your memory card is FAT32 formatted and games are placed in the correct platform folders. Check if the card is properly inserted into the TF2/EXT slot.
  • Slow game performance (e.g., PSP games): Some more demanding games may run slower. Adjust game quality settings or try different emulator cores if available.
  • Wi-Fi/Bluetooth connectivity issues: Ensure Wi-Fi and Bluetooth are enabled in settings. Restart the device and try reconnecting.
  • Device freezing/unresponsive: Press the RESET button to restart the device.

Specifications

Feature Detail
Brand NameAnbernic
ModelRG CubeXX
Display Size3.95 inches
Screen TypeIPS
Screen Resolution720*720
Operating SystemLinux
CPUH700 quad-core ARM Cortex-A53, 1.5GHz frequency
GPUDual-core G31 MP2
RAMLPDDR4 1GB
Storage32GB TF/MicroSD (Expandable up to 512GB)
Battery Capacity3800mAh
Battery TypeLi-polymer
Battery LifeUp to 6.5 hours
Charging5V/1.5A, supports C2C charger
CommunicationWi-Fi, Bluetooth-compatible
Dimensions (Width)89.6 mm
Dimensions (Height)17.9 mm
Dimensions (Depth)157.2 mm
MaterialPlastic
Games Included5000+ (may vary by SKU)
Supporting LanguageJapanese, French, German, Spanish, Portuguese, Russian, English, Korean, Simplified Chinese
Hall Effect JoysticksYes
RGB Lighting JoysticksYes
Close-up of the 3.95-inch IPS screen with 720x720 resolution

The 3.95-inch IPS screen offers a full view angle and 720x720 resolution.

Warranty and Support

For detailed warranty information and technical assistance, please refer to the official ANBERNIC support channels.

An electronic version of this user manual is available for download: Download User Manual (PDF)

For technical support services, visit: https://win.anbernic.com

User Tips

  • SD Card Replacement: It is highly recommended to replace the included SD card with a higher quality, reliable brand for better performance and longevity, as some users have reported issues with the stock card.
  • Custom Firmware: For advanced users, exploring custom firmware like Rocknix or Knulli can enhance the device's capabilities and customization options.
  • Game Performance: The RG CubeXX generally handles PS1 and earlier generation systems (e.g., GBA, Genesis, Pico-8) very smoothly. Performance for more demanding systems like N64 may vary depending on the specific game, emulator, and settings.
  • Comfort: The device's design has been noted by users to be comfortable even for those with larger hands.
  • Game Library: While many units come pre-loaded with a substantial game library, the inclusion of 5000+ games on a 64GB card can vary. Users are encouraged to manage and add their own game ROMs.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.