QIACHIP KR0548-2CH

Contents

QIACHIP EWelink Smart WiFi Relay Smart Switch User Manual

Model: KR0548-2CH

Brand: QIACHIP

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your QIACHIP EWelink Smart WiFi Relay Smart Switch. This versatile device allows you to control various electrical appliances, such as LED lights, lamps, bulbs, and garage doors, using Wi-Fi (eWelink APP, Alexa, Google Home) or RF wireless remote controls. Please read this manual carefully before use to ensure proper functionality and safety.

QIACHIP Smart WiFi Relay Module and Wireless Wall Switches

Figure 1: QIACHIP Smart WiFi Relay Module and Wireless Wall Switches

2. Safety Information

  • Ensure the power is disconnected before performing any wiring or maintenance.
  • Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
  • Do not expose the device to moisture or extreme temperatures.
  • Keep out of reach of children.
  • Observe all local electrical codes and regulations.

3. Specifications

Feature Specification
Brand Name QIACHIP
Model Number KR0548-2CH
Communication Method RF, Wi-Fi (2.4G)
RF Working Frequency 433.92MHz
Input Voltage DC 5V, 12V, 24V, 48V (DC 7V-48V range)
Max Current 10A
Working Temperature -30 ~ +80 Celsius
Controllable Remotes Up to 32PCS
Quiescent Current <50MA
Voice Control Support Google Home, Amazon Alexa
App Name eWelink APP
Dimensions 53mm x 29mm
State of Assembly Ready-to-Go
Certification CE, RoHS
Application Led light lamp bulb switch, Home garage control system
Smart Switch Module Dimensions and Control Methods Overview

Figure 2: Module dimensions (53x29mm) and overview of control methods.

4. Setup Instructions

4.1. Wiring the Smart Relay Module

The smart relay module supports DC 7V-48V input. Connect the power supply and the device to be controlled as shown in the diagram below. Ensure correct polarity for DC connections.

Wiring Diagram for Garage Door Opener

Figure 3: Example wiring for a garage door opener. Input: DC 7-48V.

Note: The relay has NO (Normally Open) and COM (Common) terminals. Connect your device to these terminals. When the relay is activated, the NO and COM terminals will close, completing the circuit.

To use the eWelink app for control, follow these steps:

  1. Download the eWelink App: Search for "eWelink" in your smartphone's app store (Google Play Store or Apple App Store) and install it.
  2. Register/Login: Open the eWelink app and register a new account or log in with an existing one.
  3. Add Device:
    • Power on the smart relay module.
    • In the eWelink app, tap the "+" icon to add a new device.
    • Select the appropriate device type (e.g., "Quick Pairing" or "Bluetooth Pairing" if available).
    • Follow the on-screen prompts to connect the device to your Wi-Fi network. This typically involves entering your Wi-Fi SSID and password.
    • Once connected, the device will appear in your eWelink app, ready for control.

For more detailed app pairing instructions, refer to the official eWelink documentation or the PDF manual available at User manual (PDF).

4.3. RF Remote Control Pairing

To pair a wireless RF remote control with the smart relay module:

  1. Enter Pairing Mode: Press the pairing button on the smart relay module (refer to the module diagram for button location). The indicator light will change, indicating it's in pairing mode.
  2. Press Remote Button: Press the desired button on your RF remote control.
  3. Confirmation: The indicator light on the module will flash or change color to confirm successful pairing.
  4. Repeat for additional remote buttons or remotes as needed (up to 32 remotes can be paired).
Wireless Switch Battery Installation

Figure 4: Sliding back cover for AAA battery installation in wireless switches.

Note: Wireless wall switches typically use AAA batteries. To install or replace batteries, slide open the back cover as shown in Figure 4.

4.4. Voice Control Integration (Alexa/Google Home)

To integrate with Amazon Alexa or Google Home:

  1. Ensure your smart relay module is successfully paired with the eWelink app.
  2. Open the Amazon Alexa app or Google Home app on your smartphone.
  3. Navigate to the "Skills & Games" (Alexa) or "Works with Google" (Google Home) section.
  4. Search for "eWelink" and enable the skill/service.
  5. Link your eWelink account when prompted.
  6. Discover devices. Your smart relay switch should now be controllable via voice commands.
Voice Control with Alexa and Google Home

Figure 5: Voice control demonstration with Amazon Alexa and Google Home.

5. Operating Instructions

5.1. Manual Control

If your smart relay module has a physical button, you can press it to manually toggle the connected device on or off.

5.2. RF Remote Control

Once paired, simply press the corresponding button on your RF wireless remote control to turn the connected device on or off.

Open the eWelink app, select your smart relay device, and use the on-screen toggle to control the connected appliance. The app also allows for advanced features:

  • Timing Function: Set schedules for automatic on/off operations. You can configure one-time timers or recurring daily/weekly cycles.
  • Scene Creation: Group multiple smart devices and control them with a single tap or command.
  • Sharing Control: Share device control with family members.
Timing Function in eWelink App

Figure 6: Example of timing function setup in the eWelink app.

5.4. Voice Control

After successful integration with Alexa or Google Home, use voice commands such as:

  • "Alexa, turn on [Device Name]"
  • "Hey Google, turn off [Device Name]"

Replace "[Device Name]" with the name you assigned to your smart switch in the eWelink app.

6. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement (for wireless switches): If your wireless wall switch becomes unresponsive, replace the AAA batteries as shown in Figure 4.
  • Firmware Updates: Periodically check the eWelink app for available firmware updates for your smart relay module to ensure optimal performance and security.

7. Troubleshooting

  • Device not connecting to Wi-Fi:
    • Ensure your Wi-Fi network is 2.4GHz. The device does not support 5GHz Wi-Fi.
    • Check if the Wi-Fi password entered in the eWelink app is correct.
    • Move the device closer to your Wi-Fi router.
    • Restart your Wi-Fi router and the smart relay module.
  • RF Remote not pairing:
    • Ensure the remote control has fresh batteries.
    • Make sure the smart relay module is in pairing mode (indicator light active).
    • Try pairing again, ensuring the remote is close to the module.
  • Voice control not working:
    • Verify that the eWelink skill/service is enabled and linked correctly in your Alexa or Google Home app.
    • Ensure the device name in eWelink matches the name used in voice commands.
    • Check your internet connection.
  • Device unresponsive:
    • Check the power supply to the smart relay module.
    • If connected via Wi-Fi, check your internet connection and router status.
    • Try restarting the module by disconnecting and reconnecting its power.

8. User Tips

  • This product is highly effective for controlling garage gate openers, providing convenient smart access.
  • Users have reported good Wi-Fi signal reception, contributing to reliable operation.
  • The device is generally easy to set up and use, making it a practical addition to smart home systems.
  • Consider the specific voltage requirements (DC 7V-48V) for your application before wiring.

9. Warranty and Support

For warranty information, technical support, or further assistance, please contact QIACHIP customer service or refer to the official product page where you purchased the device. Additional item guides and documents, including a detailed user manual in PDF format, can be found via the seller's resources or by directly accessing the PDF: User manual (PDF).

© 2023 QIACHIP. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.