MECHEN V02

Contents

MECHEN V02 Digital Voice Recorder User Manual

Model: V02

1. Introduction

Thank you for purchasing the MECHEN V02 Digital Voice Recorder. This manual provides detailed instructions on how to set up, operate, and maintain your device. Please read it carefully to ensure optimal performance and longevity of your recorder.

MECHEN V02 Voice Recorder - Front and Back View

Figure 1: MECHEN V02 Digital Voice Recorder (Front and Back)

2. Package Contents

Please check the box for the following items:

  • MECHEN V02 Digital Voice Recorder
  • USB-C Charging/Data Cable
  • Earphones
  • User Manual
Package Contents of MECHEN V02 Voice Recorder

Figure 2: Contents of the MECHEN V02 Voice Recorder Package

3. Device Overview

Familiarize yourself with the buttons and ports of your MECHEN V02 voice recorder:

  1. Earphone Jack: For connecting headphones.
  2. USB Port: Type-C port for charging and data transfer.
  3. Microphone: Built-in microphone for recording.
  4. LCD Screen: Displays device status, menu, and playback information.
  5. Stop/Save/Lock/Unlock Button: Stops recording, saves files, locks/unlocks the screen.
  6. Play/Pause/Confirm Button: Plays/pauses audio, confirms menu selections.
  7. Recording Button (REC): Starts recording.
  8. Speaker: Built-in speaker for audio playback.
  9. Power On/Off Button: Slides up to power on, slides down to power off.
  10. Menu/Volume Button: Accesses menu options, adjusts volume.
  11. Previous/Rewind/Volume+ Button: Navigates to previous track, rewinds, increases volume.
  12. Next/Fast Forward/Volume- Button: Navigates to next track, fast forwards, decreases volume.
  13. Return Button: Returns to the previous menu.

4. Setup

4.1. Charging the Device

Before first use, fully charge the voice recorder. Use a 5V 1A power adapter (not included) or connect to a PC via the provided USB-C cable. A full charge typically takes about 2 hours with an adapter. Charging via PC may take longer.

Faster Charging with Type-C USB

Figure 3: Charging the device via USB-C

4.2. Connecting to a PC

In the power-on state, connect the voice recorder to your PC using the USB-C cable. The device will appear as a removable disk drive in 'My Computer' or 'This PC', allowing you to transfer files.

5. Operating Instructions

5.1. Power On/Off

  • To Power On: Push the power button (9) upwards.
  • To Power Off: Push the power button (9) downwards.

5.2. Lock/Unlock Screen

  • To Lock: Long press the Stop/Save/Lock/Unlock button (5).
  • To Unlock: Short press the Stop/Save/Lock/Unlock button (5).

5.3. Volume Control

Press the Menu/Volume button (10) to activate volume control. Use the Volume+ button (11) to increase volume and Volume- button (12) to decrease volume.

5.4. Recording

5.4.1. Normal Recording

  1. Ensure the device is powered on.
  2. Press the big round Recording button (7) on the front panel to start recording.

5.4.2. Pause Recording

During recording, press the Play/Pause/Confirm button (6) to pause. Press it again to resume recording.

5.4.3. Save Recording

Press the Stop/Save/Lock/Unlock button (5) to stop recording and save the current file.

5.4.4. Recording Library

Recordings are automatically named with a timestamp. The latest saved recording will appear at the bottom of the recording library.

5.4.5. Recording Settings

Access these settings via the Menu button.

  • Record From:
    • Built-in MIC: Uses the internal microphone. For optimal audio quality, especially in quiet environments, an external amplification device might be beneficial.
    • Line In: Allows direct recording from external audio sources (e.g., mobile phones, cassette players, CD players) using an audio cable connected to the earphone jack. This is ideal for full mixes and loud signals.
  • Recording Sensitivity: Levels 1 to 7 are available. Higher sensitivity captures fainter sounds but may also record more background noise.
  • Recording Monitor: When enabled, you can listen to the audio being recorded through connected earphones. This helps assess audio quality in real-time. (Note: Recording Monitor and AVR Mode cannot be active simultaneously).
  • AVR Mode (Voice Activated Recording): Turn on AVR mode and press REC. The recorder will automatically start recording when sound reaches a set standard and pause when sound falls below it. Sensitivity levels 1-7 are available. Higher sensitivity means the device captures lower decibel sounds. Caution: Do not use for critical lectures or meetings, as low-decibel speech might be skipped.
  • Segment Recording: Automatically splits recordings into segments of 30, 60, 90, or 120 minutes, saving each segment independently. This aids in managing long recordings.
  • Timed Recording: Schedule recordings to start and end at specific times, with options for Single, Everyday, or Working day cycles.
  • Noise Reduction Switch: Enable to reduce background noise for clearer recordings.
  • Noise Reduction Settings: Levels 1 to 7. Higher levels provide more aggressive noise reduction.
Advanced DSP Noise Reduction and Recording Quality Options

Figure 4: Advanced DSP Noise Reduction and Recording Bitrates

Voice Activated Recording (VOR) with sensitivity levels

Figure 5: Voice Activated Recording (VOR) with adjustable sensitivity

Simple Operation - Start, Play/Pause, Stop/Save

Figure 6: Simple and Easy Recording Operation

5.5. Playback

5.5.1. Folder Management

Access the 'Folder' menu to view all saved recordings and music files. Files are displayed chronologically, with the oldest at the top.

5.5.2. Music Playback

The 'Music' menu allows you to browse and play audio files by All Songs, Artists, Albums, Genres, and Playlists. The device automatically extracts ID3 tags for organization.

5.5.3. Play Mode

Configure playback options:

  • Repeat: Options include Repeat Off, Repeat 1 (current track), and Repeat All.
  • Shuffle: Play tracks in a random order (On/Off).

5.5.4. A-B Repeat

This feature allows you to loop a specific section of an audio track.

  1. During playback, press the Menu button, then select 'Repeat settings' > 'Repeat mode'.
  2. The screen will return to playback, showing 'A-B' with 'A' flashing.
  3. Press Volume- (12) to set the start point (A). 'B' will then flash.
  4. Press Volume- (12) again to set the end point (B). The device will now repeat this section.
  5. Press Play (6) to exit A-B repeat mode.

You can also set the number of replay times (1-10) and replay interval (1-10 seconds).

5.5.5. Sound Settings

Customize your listening experience:

  • Equalizer: Choose from Off, Rock, Funk, Hip Hop, Jazz, Classical, Techno.
  • Variable Speed Playback: Adjust playback speed from -8 to 8.

5.5.6. Bookmarks

Add up to 10 bookmarks within a file to quickly return to specific points, useful for long recordings or audiobooks.

5.6. System Settings

Access these settings via the Menu button.

  • Display Settings: Adjust screensaver, brightness, and backlight timer.
  • Password Settings: Set a 4-digit password (default is 0000, turned off by default). If forgotten, enter 8888 to unlock.
  • Shutdown Settings: Configure Sleep Timer (1-99 minutes) and Power Off Timer (5, 10, 20, 30 minutes).
  • Date and Time: Set the current date and time for accurate timestamps on recordings.
  • Languages: Select your preferred language (English, French, German, Italian, Spanish, Japanese, etc.).
  • Information: View software version and available storage space.

6. Maintenance

6.1. Device Care

  • Do not scratch the recorder body.
  • Avoid operating the power button while saving a recording.
  • If the device is not used for a long time, charge it every other month to preserve battery life.

6.2. Formatting Device

You can format the device via the 'Format device' option in the settings menu. Warning: Formatting will delete all data on the device. Ensure you have backed up any important files before proceeding.

6.3. Factory Settings

The 'Factory settings' option will reset all device settings to their default state.

7. Troubleshooting

  • Device not turning on: Ensure the device is charged. Connect it to a power source and try again.
  • Cannot transfer files to PC: Ensure the USB cable is securely connected to both the recorder and the PC. Try a different USB port or cable.
  • Poor recording quality: Check recording sensitivity settings. Ensure the microphone is not obstructed. If using the built-in microphone, consider using an external amplification device for better signal. For line-in recording, ensure the source device's volume is appropriate.
  • External microphone not working for direct voice input: The device's earphone jack primarily functions as a line-in for external audio sources (like phones, players) or for connecting earphones. It is not designed for direct external microphone input for voice recording. Use the built-in microphone for voice recording.
  • Forgot password: If you forget your device password, enter '8888' to unlock the device.
  • Device freezes: Try pressing and holding the power button for 10 seconds to force a restart.

8. Specifications

FeatureSpecification
Screen Display0.85 inch, IPS screen, 128*128
Format of RecordingsMP3, WAV
Bit Rate (MP3)32kbps, 64kbps, 128kbps, 192kbps
Bit Rate (WAV)512kbps, 768kbps, 1024kbps, 1536kbps
Format of MusicMP3/WAV/APE/WMA/FLAC
Time of Charging2 hours
Support SystemWindows 7/Windows 10/11/ Mac OS 10
USB PortType C USB 2.0
Headset Jack3.5mm
Headphone output power10mW@32Ω, 20mW@16Ω
Battery260mAh Li Polymer
Working Temperature0°C~40°C
Product Dimensions109mm*26.3mm*12.2mm
Net Weightabout 55g

9. User Tips

  • Check AVR Mode: If you plan to carry the recorder for extended periods, ensure AVR (Voice Activated Recording) mode is configured as desired to avoid unintended long recordings.
  • Built-in Speaker: Utilize the built-in speaker for convenient playback without needing headphones.
  • High-Quality Recording: For critical audio capture, select WAV format with higher bitrates (up to 1536kbps) for superior sound fidelity.
  • Line-In Functionality: The 3.5mm jack serves as both a headphone output and a line-in port, allowing direct recording from other audio devices.
  • Sturdy Design: The recorder features a robust casing and responsive buttons, making it durable and easy to operate.

10. Frequently Asked Questions (FAQ)

Q: Can I use an external microphone for recording my voice?
A: The 3.5mm jack is primarily for connecting earphones or for 'Line In' recording from other audio devices. It is not designed for direct external microphone input for voice recording. Please use the built-in microphone for voice capture.
Q: How do I transfer recordings to my computer?
A: Connect the recorder to your computer using the provided USB-C cable. The device will appear as a removable drive, and you can drag and drop files.
Q: What should I do if the device is unresponsive?
A: Try pressing and holding the power button for about 10 seconds to perform a hard reset. Ensure the device is charged.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.