Fccemc F1 Style Triangle LED Brake Light

Contents

Fccemc F1 Style Triangle LED Brake Light User Manual

Model: F1 Style Triangle LED Brake Light

1. Product Overview

The Fccemc F1 Style Triangle LED Brake Light is a universal automotive warning lamp designed to enhance vehicle visibility and safety. Featuring a distinctive triangular design with 20 high-power LEDs, it functions as a brake light, offering a flashing sequence before a steady illumination, and can also be configured as a running light. Its robust construction ensures durability and weather resistance.

Fccemc F1 Style Triangle LED Brake Light held in hand with a car in the background showing the light installed.

Figure 1: Fccemc F1 Style Triangle LED Brake Light

2. Safety Warnings

  • Voltage Compatibility: Install only on 12V DC vehicle electrical systems. Connecting to a wrong voltage (e.g., 24V or household power) will cause burnout or fire.
  • Polarity: Observe polarity (+/-) strictly. Reverse connection will damage the product.
  • Fuse Protection: Install with proper fuse protection to prevent overcurrent, short circuit, and fire risk.
  • Professional Installation: Installation by a qualified electrician is highly recommended. Improper installation may cause vehicle failure or accident.
  • Road Legal Use: This product is not E-marked and may not be road legal in all regions. Use on public roads is at your own risk.
  • Child Safety: Keep out of reach of children.

3. Setup and Installation

3.1 Pre-Installation Checklist

  • Ensure your vehicle's power supply is 12V DC.
  • Gather necessary tools: wire strippers, crimpers, screwdriver (if using screws), cleaning cloth, and isopropyl alcohol.
  • Disconnect the vehicle's battery before starting installation to avoid short circuits.

3.2 Wiring Instructions

The light comes with pre-assembled wiring. Identify the following wires:

  • Black Wire: Connect to vehicle's negative (-) terminal or chassis ground.
  • Red Wire: Connect to vehicle's positive (+) brake light circuit. This will activate the light when the brakes are applied (flashing 5 times then steady).
  • Blue Wire (or Yellow Wire): Connect to vehicle's ACC (Accessory) power or small light circuit for a constant-on running light function.
Wiring diagram showing black wire to negative, blue wire to small light or ACC, and red wire to brake.

Figure 2: Wiring Diagram

3.3 Mounting the Light

Clean and thoroughly dry the installation surface (e.g., the backside of your bumper) before mounting.

Black shell light with included bracket and adhesive tape.

Figure 3: Light with Mounting Accessories

Two installation methods are provided:

  1. Method 1: Double-sided Adhesive Paste
    Apply the provided double-sided adhesive tape to the back of the light and firmly press it onto the clean, dry installation surface. This method is suitable for smooth surfaces.
  2. Method 2: Screw Fixing Design
    Use the included adjustable bracket and screws to securely attach the light. The bracket can be opened or bent to fit various bumper shapes and models. This method provides a more secure and permanent installation.
Installation method using screws and bracket.

Figure 4: Screw Fixing Installation

Demonstration of bending the bracket to fit different car models.

Figure 5: Adjustable Bracket

4. Operating Instructions

Once installed and wired correctly, the Fccemc F1 Style Triangle LED Brake Light operates automatically based on its connection:

  • Brake Light Function: When connected to the brake light circuit (red wire), the light will flash 5 times rapidly and then remain steadily on as long as the brakes are applied. This sequence significantly improves the reaction time of following motorists.
  • Running Light Function: When connected to the ACC or small light circuit (blue wire), the light will illuminate steadily, acting as an additional rear running light for enhanced visibility.

Video 1: Product Operation Demonstration

The bright LEDs and distinctive triangular shape serve as an effective anti-collision warning, especially in adverse weather conditions or at night.

Car driving in the rain with the F1 Style LED brake light illuminated, demonstrating its visibility in bad weather.

Figure 6: Visibility in Bad Weather

5. Maintenance

  • Cleaning: To clean the light, use a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the ABS shell.
  • Wiring Inspection: Periodically check the wiring connections to ensure they remain secure and free from corrosion.
  • Water Resistance: The light features a sealed, waterproof design. However, avoid directing high-pressure water jets directly at the light during car washes to prevent potential water ingress over time.

6. Troubleshooting

ProblemPossible CauseSolution
Light does not illuminateNo power, incorrect wiring, reversed polarity, blown fuseCheck power connection, ensure wires are securely connected, try reversing polarity, check vehicle's fuse for the circuit.
Light stays on constantly (when expecting brake function)Wired to ACC/running light circuit instead of brake circuitEnsure the red wire is connected to the brake light positive (+) and the blue wire (if used) to ACC.
Light flashes but does not stay on (when expecting steady on)Incorrect wiring for desired modeVerify wiring according to desired function (red for brake, blue for constant).
Light is dim or flickersPoor connection, insufficient power, faulty unitCheck all wiring connections for tightness and corrosion. Ensure vehicle's electrical system is stable. If problem persists, contact support.

7. Specifications

FeatureDetail
ModelF1 Style Triangle LED Brake Light
BrandFccemc
Voltage12V DC
LED Quantity20 high power LEDs
Light ColorRed
Shell MaterialABS
Shell Colors AvailableBlack, Red, White
Dimensions (W x H x D)9.5 cm x 7.5 cm x 2.5 cm
Item TypeStrobe Light / Car Decorative Light
FeaturesFlash warning, waterproof design, low power consumption, universal fit
ComplianceEU RoHS, REACH, LVD 2014/35/EU, EMC 2014/30/EU
Diagram showing the dimensions of the F1 Style LED brake light: 9.5cm width, 7.5cm height, 2.5cm depth.

Figure 7: Product Dimensions

8. User Tips

  • Testing Polarity: If the light does not work immediately after installation, try reversing the polarity of the connecting wires.
  • Customizing Function: For a constant light (e.g., as a running light), connect the blue wire to your vehicle's ACC or small light circuit. For brake light functionality (flashing then steady), connect the red wire to your brake light circuit.
  • Vehicle Inspection: Be aware of local vehicle inspection regulations. Some users have noted that an additional flip-flop relay might be required for compliance in certain regions when using this as a rear fog lamp.
  • Secure Mounting: For long-term durability, especially on bumpy roads, consider using the screw-fixing method with the bracket rather than just adhesive.

9. Frequently Asked Questions (FAQ)

Q: Is this light compatible with 24V systems?
A: No, this light is designed for 12V DC vehicle electrical systems only. Connecting it to 24V will damage the product and poses a fire risk.
Q: Can this light stay on permanently without flashing?
A: Yes, by connecting the blue wire to your vehicle's ACC (Accessory) power or small light circuit, the light can remain steadily on.
Q: What if the light doesn't work after installation?
A: First, ensure all connections are secure and the vehicle's power is on. If it still doesn't work, try reversing the polarity of the LED light connecting wires (swap positive and negative connections).

10. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact your seller or the manufacturer directly.

Manufacturer Information:

Guangzhou Zhengji Information Technology Co., Ltd
Address: Room 311, Building 2, Jiahe Creative Industry Park, Huangbian North Road, Baiyun District, Guangzhou City, Guangdong Province, China, 510440
Tel: +86-13535102100
E-mail: zj634216187@163.com

EU Authorized Representative:

Apex CE Specialists GmbH
Address: Grafenberger Allee 277, 40237 Dusseldorf, DE
Tel: +49 21312066043
E-mail: Info@apex-ce.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.