MAGIC COLORM KIA Sportage QL KX5 Fog Light Assembly

Contents

User Manual

KIA Sportage QL KX5 LED Fog Light Assembly

Model: KIA Sportage QL KX5 Fog Light Assembly | Brand: MAGIC COLORM

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new LED Fog Light Assembly for KIA Sportage QL KX5 (2016-2018). Please read this manual thoroughly before installation and use to ensure proper function and safety.

KIA Sportage QL KX5 with installed LED fog lights and the two fog light assemblies
Figure 1: KIA Sportage QL KX5 with the LED Fog Light Assembly installed, alongside the product units.

Video 1: Product Display - A visual overview of the LED Fog Light Assembly.

2. Safety Information

  • Do not modify or disassemble the product's circuitry, as this may cause malfunctions or safety hazards.
  • Do not use in damp, high temperature, or flammable/explosive environments.
  • Do not adjust the lights during driving to avoid distractions.

3. Product Overview

The MAGIC COLORM LED Fog Light Assembly is designed to enhance visibility and safety for KIA Sportage QL KX5 models from 2016 to 2018. It features an optical design for efficient light distribution, high brightness LEDs, and a durable ABS housing.

Close-up of the LED fog light assembly showing optical design, high brightness light, and ABS housing
Figure 2: Product Details - Highlighting optical design, high brightness, and ABS housing.

4. Setup and Installation

  1. Unboxing and Initial Check: After unboxing, verify that all components are present and undamaged. It is recommended to connect the fog lights to the vehicle's 12V power source for a functional test before proceeding with the full installation.
  2. Planning Installation Location: Identify the designated area or reserved slot on the vehicle's front bumper for the fog lights.
  3. Surface Preparation: Thoroughly clean the installation surface to ensure it is free of dust, oil, and moisture. This guarantees a secure fit.
  4. Secure Connections: Ensure all wiring harnesses are securely connected and properly fastened, with no risk of loosening. The product features a standard plug-and-play design for non-destructive installation.
    Close-up of the fog light assembly showing the plug-and-play connector
    Figure 3: Easy Installation - Illustrating the plug-and-play connector for simple setup.
  5. Final Mounting: Mount the fog light assemblies securely into the prepared locations.

Installation Effect:

Before and after installation comparison of fog lights on a KIA Sportage QL KX5
Figure 4: Installation Effect - Visual comparison of the vehicle before and after fog light installation.

5. Operation

Fog lights are primarily designed to improve forward visibility in low-visibility conditions such as rain, fog, heavy snow, or dust. They provide compliant light penetration to effectively enhance driving safety in adverse weather conditions.

Important:

  • Do not misuse fog lights in normal weather or well-lit conditions to avoid causing glare to other road users.
Image showing the lighting effect of the LED fog lights, including ground scattering
Figure 5: Lighting Effect - Demonstrating the ground scattering effect and overall brightness.

6. Maintenance

  • Usage Environment: Avoid exposing the fog lights to extreme temperatures, excessive humidity, or corrosive environments for extended periods to ensure longevity.
  • Vehicle Storage: If the vehicle will be parked and unused for an extended period, it is recommended to turn off the power to all added lighting devices, including the fog lights, to prevent unnecessary battery drain or component wear.
  • Cleaning: Regularly clean the fog light lenses with a soft cloth and mild cleaning solution to maintain optimal light output. Avoid abrasive cleaners.

7. Troubleshooting

Problem Possible Cause / Solution
Fog Lights Not Illuminating
  • Check if the vehicle's power supply is normal.
  • Inspect whether the fog light fuse is blown and replace if necessary.
  • Verify that the power and wire connections are secure and reliable.
Abnormal Lighting (e.g., Unstable Brightness)
  • Check for loose or oxidized wiring harness connectors and secure/clean them.
  • Inspect the vehicle's voltage stability.
Overheating Lens or Condensation Inside
  • Stop using immediately.
  • Overheating may indicate an electrical issue.
  • Condensation may affect sealing.
  • Contact a professional for inspection.

For issues not covered here or if troubleshooting steps do not resolve the problem, please contact customer support.

8. Specifications

Feature Detail
Product Name Car Fog Light Assembly
Brand MAGIC COLORM
Compatibility KIA Sportage QL KX5 (2016, 2017, 2018)
Item Type LED Headlight, Day Light, Fog Lamp Assembly
Special Features LED Headlight
Material ABS+LED
Voltage 12 V
Color Black (Housing) / White (Light)
Item Weight About 3.5KG
Package Weight 3.14 KG
Package Dimensions (L x W x H) 47 cm x 35 cm x 21 cm
Origin Mainland China
Dimensions diagram of the fog light assembly components
Figure 6: Product Dimensions - Detailed measurements of the fog light assembly and related parts.

9. User Tips

While no specific user reviews or Q&A were provided, general tips for car lighting accessories often include:

  • Always ensure your vehicle's battery is disconnected before performing any electrical work.
  • Test the lights thoroughly before fully reassembling the bumper or trim to ensure all connections are correct and the lights function as expected.
  • Periodically check wiring for signs of wear or corrosion, especially in areas exposed to road spray or debris.

10. Support

For any questions, concerns, or assistance regarding your LED Fog Light Assembly, please contact the store customer service where you purchased the product.

A detailed user manual in PDF format is also available for reference: View User Manual (PDF).

© 2023 MAGIC COLORM. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.