1. Product Overview
The Nordic Modern Long Arm Wall Light is a versatile and stylish lighting solution designed for various indoor applications such as study rooms, bedrooms, and bedside reading. It features an adjustable long arm and a durable iron construction, providing focused illumination where needed.
Figure 1: Black Wall Light in Living Room
Figure 2: Red Wall Light in Study Area
2. Setup and Installation
This section provides detailed instructions for safely installing your wall light. Please read all instructions carefully before beginning installation.
2.1 Tools Required
- Cross Screwdriver (2#)
- Slotted Screwdriver (#0)
- Hammer
- Percussion Drill
2.2 Installation Steps
Figure 3: Wall Light Installation Diagram
- Prepare Power Supply: Turn OFF the household power supply at the circuit breaker to prevent electric shock.
- Connect Test Wire (Optional): If testing the circuit, connect a test wire to the household power supply. If the light shows any abnormal phenomenon, immediately cut off the power supply. If no abnormality, cut off the power again before proceeding. Use a #0 Phillips screwdriver to remove the test wire.
- Mount Hanging Board: Use the hanging board as a template. Mark the drilling points on the wall. Use a percussion drill to create holes with a diameter of 6mm and a depth of at least 35mm.
- Insert Expansion Plugs: Gently tap the expansion rubber plugs into the drilled holes with a hammer until they are flush with the wall surface.
- Secure Hanging Plate: Align the self-tapping screws with the expansion plugs. Use a 2# Phillips screwdriver to twist them clockwise to securely fasten the hanging plate to the wall.
- Wire Connection: Connect the neutral and live wires from your household power supply to the corresponding terminals on the lamp. Ensure the ground wire is connected to the central ground interface.
- Attach Lamp Body: Align the '7'-shaped hole on the lamp body with the screw on the hanging plate. Rotate the lamp body to fasten it securely.
- Tighten Screws: Use a slotted screwdriver to tighten any remaining hanging board screws.
- Complete Installation: Once all connections are secure and the lamp is firmly mounted, turn ON the household power supply.
Safety Note: If you are unsure about any part of the electrical installation, please consult a qualified electrician.
2.3 Connection Type
Your wall light comes with one of two connection types:
- Wall Wire: Designed for direct wiring into your home's electrical system (requires professional installation).
- Plug Wire: Features a power cord with a plug for easy connection to a standard wall socket.
3. Operating Instructions
3.1 Turning On/Off
The wall light is equipped with a knob switch. Rotate the knob to turn the light ON or OFF.
3.2 Adjusting the Light
The lamp features a long arm with rotatable joints, allowing you to adjust the angle and direction of the light. Gently pivot the arm and lamp head to achieve your desired lighting position.
Figure 4: Rotatable Arm Angles Diagram
4. Maintenance
- Cleaning: To clean the lamp, ensure the power is off. Wipe the metal surfaces with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Ensure the power is off and the bulb has cooled down. Unscrew the old E27 bulb and screw in a new one. Compatible bulbs include LED, CFL, or incandescent bulbs (max 30W).
5. Troubleshooting
- Light Does Not Turn On:
- Check if the power supply is connected and turned on.
- Ensure the bulb is correctly screwed in and not faulty.
- Verify the knob switch is in the 'ON' position.
- Light Flickers:
- Ensure the bulb is fully tightened.
- Check for loose wiring connections (only if you are qualified to do so, otherwise consult an electrician).
- Try a different bulb to rule out a faulty bulb.
- Abnormal Operation: If you notice any unusual behavior (e.g., smoke, burning smell, excessive heat), immediately turn off the power supply at the circuit breaker and disconnect the lamp. Do not attempt to repair it yourself; contact support.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | TAONUANSHU |
| Model Number | T-A-001 |
| Material | Metal (Iron Body, Iron Shade) |
| Voltage | 90 - 260 V AC |
| Light Source | LED (Bulb Included) |
| Base Type | E27 |
| Max Wattage | 30W |
| Luminous Flux | 249-2000 Lumens |
| Lighting Area | 5-10 square meters |
| Installation Type | Wall Mounted (Self-contained) |
| Switch Type | Knob Switch |
| Dimmable | No |
| Available Colors | Black, Red, White |
| Features | Folding arm, Reading lamp |
| Certifications | CCC, CE, CQC, EMC, ROHS, SAA |
| Product Dimensions | Height: 26cm, Width: 25cm, Base Width: 5cm |
| Package Dimensions | 50cm (L) x 35cm (W) x 30cm (H) |
| Package Weight | 3.0 kg |
Figure 5: Wall Light Dimensions Diagram
7. User Tips
- Connection Choice: When ordering, ensure you select the correct connection type (wall wire for permanent installation or plug wire for socket use) that best suits your needs.
- Adjustability: Take full advantage of the rotatable arm to direct light precisely where you need it, making it ideal for reading or task lighting.
- Bulb Selection: While an LED bulb is included, you can experiment with different E27 bulb types (within the 30W limit) to achieve your preferred light temperature and brightness.
8. Warranty and Support
8.1 Warranty
This TAONUANSHU wall light comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
8.2 Customer Support
For any questions, technical assistance, or warranty claims, please contact the seller or retailer from whom you purchased the product. Provide your model number (T-A-001) and a detailed description of the issue for faster service.