1. Safety Information
READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN.
- To reduce the risk of electric shock, ensure the electricity has been turned off at the circuit breaker or fuse box before you begin.
- All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
- The outlet box and support structure must be securely mounted and capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet boxes marked "Acceptable for Fan Support of 35 lbs. (15.9 kg) or less".
- The fan must be mounted with a minimum of 7 ft. (2.1 m) clearance from the trailing edge of the blades to the floor.
- Do not operate the reversing switch while the fan blades are in motion. You must turn the fan off and stop the blades before you reverse the blade direction.
- Do not place objects in the path of the blades.
- To avoid personal injury or damage to the fan and other items, use caution when working around or cleaning the fan.
- Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL-listed and marked suitable for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
- All setscrews must be checked and re-tightened where necessary before installation.
WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.
WARNING: To reduce the risk of fire or electric shock, this fan is NOT suitable for use with solid-state speed controls.
WARNING: To avoid possible electrical shock, make sure that the electricity is turned off at the main power box before starting work. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician.
WARNING: Electrical diagrams are for reference only. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan.
WARNING: To reduce the risk of fire, electrical shock or personal injury, ensure that the fan mounting bracket is supported directly from the building structure or the outlet box marked "Acceptable for Fan Support of 35 lbs. (15.9 kg) or less". Use only the screws provided with the outlet box.
2. Package Contents
Ensure all parts are present before beginning installation. If any parts are missing or damaged, contact customer support.
| Item | Description | Quantity |
|---|---|---|
| A | Fan-motor assembly | 1 |
| B | Pin cover | 1 |
| C | Canopy | 1 |
| D | Downrod | 1 |
| E | Inside canopy | 1 |
| F | Decorative cover | 1 |
| G | Remote control unit | 1 |
| H | Controller | 1 |
| I | Installation instruction | 1 |
Hardware Included
- Tapping Screws (AA): 4 pcs
- Expansion Bolts (BB): 2 pcs
3. Tools Required
The following tools are required for installation:
- Phillips screwdriver
- Flat blade screwdriver
- Step ladder
- Drill
- Wrench
4. Installation Instructions
4.1 Mounting Hanger (Hanging Part)
SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX BEFORE STARTING.
For Wooden Ceiling:
- Use the Mounting Bracket (A) as a guide to mark the spots where the 4 Self Tapping Screws (B) will be drilled.
- Remove the Mounting Bracket (A), drill 4 holes for 3MM diameter, and install the mounting bracket onto the wooden ceiling with the 4 Self Tapping Screws (B).
IMPORTANT: SCREWS MUST BE TIGHTENED TILL SNUG
For Concrete Ceiling:
- Use the Mounting Bracket (A) as a guide to mark the spots where the 2 Expansion Bolts (B) will be drilled.
- Remove the Mounting Bracket (A). Drill 2 holes for 8MM diameter and insert 2 Expansion Bolts (B) into the concrete ceiling. Install the mounting bracket and secure with Flat Washers (C), Spring Washers (D), and Nuts (E).
IMPORTANT: SCREWS MUST BE TIGHTENED TILL SNUG
4.2 Install the Downrod Assembly
- Insert the canopy and the Bolt & Pin cover onto the downrod. Carefully feed motor wires through the downrod assembly.
- Slide the ball down the downrod.
- Put the round latch in.
- Replace the hanger ball at its normal position.
- Secure the two screws.
- Thread the suspender through the suspended clock and coupling cover.
- Then insert the tail of the suspender from the lifting head of the motor.
- Remove the lateral pin out from the suspended head position, secure with R type pin (Clevis pin).
- Tighten the lifting head screws. Tighten the 2 Set Screws on the Coupling to serve as a clamping force on the Downrod to prevent fan shaking during operation.
- Route the Coupling cover, Canopy Ring, Canopy and Hanger Ball through the Downrod in turn, and then install the Lock pin through the hole on the Downrod. Fix it by Screw, then slip down the Coupling Cover in correct position.
4.3 Installing Remote Control Receiver
Once wiring steps are completed, slide the wired remote receiver in between the mounting bracket and the top of the downrod ball for downrod fans.
4.4 Installing the Canopy
- Carefully push the canopy to the bottom of the mounting bracket, make two sliding holes aligned to the two prominent screws on the mounting bracket, and then turn clockwise until tight.
- Push the canopy ring to the bottom of the canopy, slide the inner holes aligned to the two prominent screws on the mounting bracket again, and turn the canopy ring clockwise until tight.
4.5 Remote Control Wiring Diagram
Turn off the electric power during installation and making wire connection.
- Connect the wire from the ceiling fan into the receiver.
- Connect the wire from the receiver with the wire from the house.
The wiring connections are as follows:
- From House: Connect to the receiver.
- From Ceiling Fan: Connect to the receiver.
- Receiver Output: Brown wire for DC IN L, Blue wire for DC IN N.
Video: Demonstration of the IRALAN Ceiling Fan with Light in operation, showcasing its light and fan functions.
5. Operating Instructions
5.1 Using the Remote Control
Note: The remote control must match the same code as the receiver.
- NO/OFF: Turns the fan and light on/off.
- Wind speed 1-6 gear: Adjusts fan speed from 1 (low) to 6 (high).
- Increased brightness: Increases the light brightness.
- Reduced brightness: Decreases the light brightness.
- Fan forward/reverse switch: Changes the direction of fan rotation (for summer/winter modes).
- General (turn off all functions): Turns off all active functions.
- Turn off the fanCode: Specific function for fan control.
- Increased color temperature: Adjusts light to a cooler color temperature.
- Lower color temperature: Adjusts light to a warmer color temperature.
- Natural Wind: Activates a natural breeze simulation mode.
- 2-hour time: Sets a 2-hour timer for operation.
- Night light: Activates a low-brightness night light mode.
Image: IRALAN Invisible Fan with key features: Input Voltage 180-265V, Sound 30dB (Quiet for Sleep), and Control Method: Remote Control + APP. Also shows the remote control unit.
Image: Diagram illustrating the reversible wind function of the IRALAN Ceiling Fan: Downward Airflow for Summer Mode and Upward Airflow for Winter Mode.
5.2 Instruction of APP Control
- Step 1: Scan the QR Code (found in the manual or product packaging) to download the app and install it on your phone.
- Step 2: Turn on the light and search for the light in the app, then pair them.
App functions include:
- Buttons 1-6 control the power of the fan.
- Turning on the light and pressing the pairing button immediately will pair the device.
- Changing the color temperature.
- Power switch for the light.
- Fan on/off control.
6. Care and Maintenance
WARNING: Make sure the power is off before cleaning your fan.
- Because of the fan's natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling.
- Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
- You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a light application of shoe polish.
- You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings.
7. Troubleshooting
| Problem | Solution |
|---|---|
| The fan will not start |
|
| The fan is noisy |
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | IRALAN |
| Model Number | BY-601-500-1 |
| Item Type | Ceiling Fans |
| Control Method | REMOTE CONTROL, APP |
| Switch Type | REMOTE CONTROL |
| Luminous Flux | 2000-82000 LM |
| Power Source | AC |
| Light Source | LED bulbs |
| Is Dimmable | Yes (Stepless dimming) |
| Is Bulbs Included | No |
| Is Batteries Included | No |
| Number of Lights | 1 pcs |
| Body Material | ABS, Iron, PMMA |
| Installation Method | Assembly |
| Certification | CCC, CE |
| Warranty | 2 years |
| Weight | 5.435 kg |
| Origin | Mainland China |
| Style | Modern Style |
| Finish | None |
| Hign-concerned Chemical | None |
| Power | 60W |
| Application Space | 10-20 M² |
| Color Rendering Index (CRI) | Ra>98 |
| Lighting Mode | Side Light |
| Application Scenario | Dining room/bedroom/room |
| Size (48 inch model) | 121x121x35cm |
| E27 Fan Light Dimensions | Approx. 20cm/8inch (height), 40cm/16inch (width) |
| E27 Fan Light Color Temperature | White/warm/natural light |
| E27 Fan Light Installation Method | E27 screw mouth |
Image: Detailed specifications table for the 48" Ceiling Fan with LED Light, including dimensions, power, material, warranty, application space, CCT, lumen, lighting mode, application scenario, and control method.
Image: Diagram showing dimensions and basic information for the E27 fan light model, including product name, material, scenario, color temperature, light source, and installation method. Note: The lamp does not include E27 lamp holder wire; please purchase it separately.
9. Warranty and Support
9.1 Warranty Information
To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and re-installing the product are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by affixing any accessories, is not covered by this warranty.
Because of varying climatic conditions, this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of "wobble" is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Hereby disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.
9.2 Support
For after-sales inquiries, please contact us via email: sxdsltd@163.com
Additional item guides and documents, including a PDF user manual, may be available. Please refer to the official product page or contact support for access to these resources. The PDF user manual can be referenced at: https://manuals.plus/m/f5db2d343961efa2405a047833ee6db649de73751d86d25d534e16240ef698d6
10. User Tips
No specific user tips were available from provided reviews or Q&A content.
11. Frequently Asked Questions (FAQ)
No specific FAQ content was available from provided Q&A data.