DESLOC Smart Fingerprint Deadbolt

Contents

DESLOC Keyless Entry Door Lock

Model: Smart Fingerprint Deadbolt

Introduction

Thank you for choosing the DESLOC Keyless Entry Door Lock. This smart lock provides secure and convenient access to your home through multiple unlocking methods: fingerprint, PIN code, and traditional physical keys. Designed for durability and ease of use, this manual will guide you through the installation, setup, and operation of your new smart lock.

DESLOC Keyless Entry Door Lock installed on a wooden door

DESLOC Keyless Entry Door Lock with fingerprint scanner and keypad.

Product Overview

Unlocking Methods

Your DESLOC smart lock offers versatile access options:

  • Fingerprint Unlock: Fast and secure biometric access with a 99% recognition rate and 0.3s recognition time.
  • PIN Code Unlock: Create and manage multiple user PIN codes for family and guests.
  • Physical Keys: Traditional key access for backup or convenience.
Three images showing fingerprint, PIN code, and physical key unlocking methods

Unlock your door using fingerprint, PIN code, or physical keys.

Lock Body Components

Exterior Lock

  • Light Indicator: Provides visual feedback on lock status.
  • Keypad: For PIN code entry.
  • Fingerprint Reader: For biometric access.
  • Key Hole: For physical key access.
  • Type-C Backup Power Port: For emergency power if batteries are depleted.

Interior Lock

  • Battery Cover: Protects the battery compartment.
  • Thumb Turn: For manual locking and unlocking from the inside.
Hand pressing fingerprint sensor on the lock

Fingerprint unlock offers 99% recognition rate and 0.3s recognition time.

Package Contents

Please check that all components are present in your package:

  • Exterior Lock Assembly
  • Interior Lock Assembly
  • Front Rubber Pad
  • Mounting Plate
  • Deadbolt Latch
  • Strike Plate
  • Strike Box
  • Mechanical Keys (2 included)
  • Reset Tool
  • Various Screws (Deadbolt/Strike Plate Screws, Mounting Plate Screws, Interior Lock Screws)
  • User Manual

Specifications

FeatureDetail
Power Supply4 x AA Dry Batteries (12 months battery life)
Working Temperature-30°C ~ 70°C (-22°F ~ 158°F), Non-condensing
Fit Door Thickness35mm ~ 50mm (1-3/8" to 2")
MaterialAluminium Alloy / Zinc Alloy
Unlock MechanismFingerprint, Password, Mechanical Keys
Password Capacity99 Groups
Fingerprint Capacity50 Groups
Waterproof RatingIP54
Handle DirectionDirection Reversible
Installation MethodPunch-free installation
CertificationCE, FCC
Lock with water droplets, showing IP54 waterproof rating

IP54 waterproof rating ensures premium security and durability.

Interior view of the lock showing 4 AA batteries

Powered by 4 AA batteries, providing up to 12 months of battery life.

Installation Guide

Door Compatibility Check

Before installation, ensure your door meets the following requirements:

  • Door Thickness: 1-3/8" to 2" (35mm to 50mm)
  • Cross-bore Diameter: 2-1/8" (54mm)
  • Backset: 2-3/8" (60mm) or 2-3/4" (70mm)
  • Door Hole Diameter: 1" (25mm)
  • Suitable Door Types: Steel Door, Wooden Door, Other
  • Lock Type: Compatible with Single Cylinder deadbolts. Not compatible with Mortise or Integrated lock systems.
Diagram showing door size and lock size compatibility

Check door and lock dimensions for compatibility before installation.

Deadbolt Adjustment (if needed)

If your door requires a 70mm backset, you may need to adjust the deadbolt. Turn the faceplate of the deadbolt 180° to extend its length from 60mm to 70mm.

Installation Steps

Follow these steps carefully to install your DESLOC Keyless Entry Door Lock:

  1. Install the Deadbolt: Insert the deadbolt into the door edge. Ensure the word "TOP" on the deadbolt is facing upwards. Secure it with 2 deadbolt screws. Keep the deadbolt in the retracted (unlocked) position.
  2. Attach Exterior Lock: Connect the exterior lock assembly to the front rubber pad. Carefully align and secure this assembly onto the door, ensuring the paddle is horizontal and the cable is routed through the door hole, below the deadbolt.
  3. Install Mounting Plate: Peel the adhesive tape from the mounting plate. Position the cable near the mounting plate and secure the mounting plate to the door frame with screws.
  4. Connect Cables: Insert the exterior lock's cable into the wire connector on the interior lock assembly. Ensure it is properly and securely connected.
  5. Insert Paddle: Carefully insert the paddle from the exterior lock into the hole at the back of the thumb turn on the interior lock assembly.
  6. Secure Interior Lock: Open the battery cover of the interior lock. Align the interior lock assembly with the mounting plate and secure it with 3 screws. Ensure all wires are neatly concealed within the door or designated wire-housing areas.
  7. Insert Batteries: With the door in a locked position, insert 4 AA batteries into the battery compartment of the interior lock. Ensure correct polarity. Close the battery cover.
  8. Set Door Handing: The lock needs to learn the door's opening direction. Rotate the thumb turn to fully engage the deadbolt (locked position). This action sets the door handing. If the deadbolt is retracted, a red light will flash and an alarm will sound, indicating the direction is not set.

Watch this video for a detailed installation and setup guide.

Operating Instructions

Initial Setup & Master PIN

The factory default Master PIN code is 123456. It is crucial to change this immediately after installation for security purposes.

Change Master PIN Code

  1. Press the Change Master PIN code button.
  2. Enter 123456 then press #.
  3. Press 4 then press #.
  4. Enter your New Master PIN (6 digits) then press #.
  5. Re-enter your New Master PIN (6 digits) then press # to confirm.

User Management

You can add up to 98 User PIN codes and 50 User Fingerprints.

Add User PIN Code

  1. Press the Add User PIN code button.
  2. Enter a User ID (02-99) then press #.
  3. Enter the Master PIN then press #.
  4. Enter the New User PIN (4-9 digits) then press #.
  5. Re-enter the New User PIN (4-9 digits) then press # to confirm.

Add User Fingerprint

  1. Press the Adding User fingerprint button.
  2. Enter the Master PIN then press #.
  3. Enter a User ID (01-50) then press #.
  4. Place the user's finger on the fingerprint reader 5 times, lifting between each scan, until successful.

Delete User PIN Code

  1. Press the Delete some of the User PIN codes button.
  2. Enter the Master PIN then press #.
  3. Press 2 then press #.
  4. Press 1 then press #.
  5. Enter the User ID (02-99) to delete then press #.
  6. Re-enter the User ID then press # to confirm.

Delete User Fingerprint

  1. Press the Delete some of the User fingerprints button.
  2. Enter the Master PIN then press #.
  3. Press 2 then press #.
  4. Press 2 then press #.
  5. Enter the User ID (01-50) to delete then press #.
  6. Re-enter the User ID then press # to confirm.

Delete All User PIN Codes

  1. Press the Delete all User PIN codes at a time button.
  2. Enter the Master PIN then press #.
  3. Press 3 then press #.
  4. Press 1 then press #.

Delete All User Fingerprints

  1. Press the Delete all User fingerprints at a time button.
  2. Enter the Master PIN then press #.
  3. Press 3 then press #.
  4. Press 2 then press #.

Delete All User PIN Codes and Fingerprints

  1. Press the Delete all User at the same time button.
  2. Enter the Master PIN then press #.
  3. Press 3 then press #.
  4. Press 3 then press #.

Auto Lock Mode

The lock can be set to automatically lock after a specified duration (3-30 seconds).

  1. Press the Auto lock mode button.
  2. Enter the Master PIN then press #.
  3. Press 5 then press #.
  4. Enter the Time (3-30 seconds) then press #.

Cancel Auto Lock Function

To keep the door unlocked indefinitely:

  1. Press the Cancel Auto lock function button.
  2. Enter the Master PIN then press #.
  3. Press 5 then press #.
  4. Enter 00 then press #.

Sound Settings

Turn Sound On/Off

You can mute or unmute your lock's beeping sounds. By default, sound is ON.

  1. Press the Turn Sound on/off button.
  2. Enter the Master PIN then press #.
  3. Press 6 then press #.
  4. To turn sound OFF, press 1 then press #.
  5. To turn sound ON, press 2 then press #.

Note: When the lock is muted, you will not hear any beeping for programming, low battery alerts, or system alerts.

Status Indicators (Light and Sound)

EventLock Response
Unlock / Correct Setting1 short beep and blue light flashing
Lock2 short beeps and red light flashing
Incorrect Entry / Operation Error1 short beep and red light flashing
Wrong PIN Code Entry (3 Times)3 long beeps and red light flashing 3 times (lockout for 180 seconds)
Low Battery Alarm6 short beeps and red light flashing 6 times
Power On1 long beep and 3 short beeps, then blue light flashing
Latch AlarmContinuously two long beeps and flashing red LED if door is not completely closed

Maintenance

Battery Replacement

When the low battery alarm sounds, replace all four AA batteries promptly. Ensure you use new, high-quality alkaline batteries for optimal performance and battery life. The lock can still be opened with physical keys even if the batteries are completely dead.

Cleaning

Clean the lock's exterior with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components. Regularly wipe the fingerprint sensor to ensure accurate readings.

Troubleshooting

  • Lock is unresponsive: Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary.
  • Fingerprint not recognized: Ensure your finger is clean and dry. Try re-enrolling your fingerprint. Clean the fingerprint sensor with a soft cloth.
  • PIN code not working: Double-check that you are entering the correct PIN code. Ensure the lock is not in lockout mode (after 3 incorrect attempts).
  • Door not locking/unlocking properly: Check for any obstructions in the door frame or deadbolt path. Ensure the deadbolt is aligned correctly with the strike plate.
  • Lock beeps continuously: This might indicate a latch alarm if the door is not fully closed. Close the door completely.
  • Forgot Master PIN: Perform a factory reset (see Operating Instructions) to restore the default Master PIN (123456). Note that this will erase all user data.

Warranty and Support

Your DESLOC Keyless Entry Door Lock comes with a 12-month warranty from the date of purchase.

For technical support, warranty claims, or any questions regarding your product, please contact us through the following channels:

© 2024 DESLOC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.