emiuzek D10

Contents

D10 WiFi and Bluetooth 5.0 Audio Receive Module User Manual

Model: D10 | Brand: emiuzek

1. Introduction

The D10 WiFi Audio module (MA88) is a smart audio module designed for wireless audio applications such as wireless speakers, docking stations, Wi-Fi base stations, home automation, and smart toys. It supports 802.11b/g/n Wi-Fi standards with up to 300Mbps bandwidth, operating in AP, AP client, or station modes.

This module is fully compatible with Apple AirPlay and Digital Living Network Alliance (DLNA) streaming standards, offering Hi-Fi audio up to 192KHz, 24-bit with support for popular audio formats. It enables multi-room and multi-channel audio streaming with precise synchronization.

With the D10 module, you can wirelessly stream music from various devices like iPhones, iPads, iPod touches, Android devices, or PCs to your speakers. It transforms traditional speaker systems into Internet-enabled devices through wired or wireless connections, allowing playback of Internet audio content such as music, podcasts, radio, or accompanying audio from movies.

D10 Wireless Audio Receiver Board
Figure 1.1: The D10 Wireless Audio Receiver Board.
D10 + conventional speakers = WiFi Smart Speaker
Figure 1.2: Concept of transforming conventional speakers into WiFi Smart Speakers using the D10 module.

2. Key Features

  • Supports 2.4GHz 802.11 b/g/n Wi-Fi with optimized performance.
  • 10/100Mbps Ethernet support.
  • Internet audio streaming via Apple AirPlay or DLNA.
  • Compatibility with streaming services like Spotify, Pandora, iHeartRadio, Tidal, TuneIn, and more.
  • Supports TCP/IP/UDP/HTTP/UPNP protocols.
  • Playlist support for M3U, M3U8, WPL, ASX, PLS formats.
  • Audio format support: MP3, WMA, AAC, AAC+, ALAC, FLAC, APE, WAV, etc.
  • STA/AP/AP Client mode support.
  • Ethernet, UART, and USB2.0 interfaces.
  • Digital audio input and output via I2S interface.
  • Built-in web server for easy module configuration.
  • Remote control via WLAN.
  • Online firmware upgrade capability.
  • Module configuration via iOS or Android APP.
  • Wi-Fi UART pass-through or self-defined MCU/UART interface.
  • Multi-room audio (party mode) and multi-channel audio with perfect time synchronization.
  • Supports most popular streaming services around the world.
  • Provides iOS, Android, and PC SDK and applications.

3. Applications

  • Wi-Fi speaker systems
  • Smart toys
  • Smart audio receivers
  • Wi-Fi audio docking stations for smartphones
  • Internet smart audio devices
  • Internet radio receivers
  • Home automation and Internet of Things (IoT) integration

4. Setup and Hardware Connections

D10 All accessories including board and cables
Figure 4.0: The D10 module and included accessories (cables).

4.1 Interface Description

The D10 WiFi Audio module connects to a customer board via its 36-pin DIP interface. Refer to the pinout diagram and table below for detailed information.

D10 Simple interface with key ports labeled
Figure 4.1: Simple interface of the D10 module with key ports labeled (Audio signal output and ground, Reset button, WiFi Antenna, 2PIN 5V1A Power Input, 3.5 Audio Output, 3M sticker, Screw hole).
D10 Mini size with dimensions
Figure 4.2: D10 module dimensions (55mm x 45mm).

Pinout Diagram

The following diagram illustrates the pin configuration of the MA88 module. For detailed pin labels, refer to the table below.

MA88 Module Pinout Diagram
Figure 4.3: Pinout diagram of the MA88 module. For detailed pin labels and connections, refer to the official MA88 Datasheet PDF.

Pin Description Table

Pin Net Name Type Description
1,2DC 5.0VPower InputDC 5.0V, 350mA
3,4GNDGroundGround
5I2S_WSI/O
6I2S_CLKI/OAll pins could be pin shared as GPIO
7I2S_SDOO
8I2S_SDII
9ETH_TXPO
10ETH_TXNO10/100M Ethernet interface
11ETH_RXPI
12ETH_RXNI
13USB_DMI/OUSB 2.0 Host
14USB_DPI/O
15I2C_CLKO
16I2C_SDAI/OI2C interface, in module 4.7K resistor pull-up
17RESETI, IPUReset with pull down, reset time >300ms
18nReloadI/O, IPUFirst Input 0 and keep for more than 5 seconds then change to 1, it will go back to factory setting, in module 4.7K resistor pull-up
19GPIO5I/O, IPUin module 4.7K resistor pull-up
20DC 3.3VPower OutputDC 3.3V, 100mA
21GNDGroundGround
22GPIO2I/O, IPUin module 4.7K resistor pull-up
23GPIO1I/O, IPUin module 4.7K resistor pull-up
24UART_RXDINeed keep UART_TXD high during chip boot-up
25UART_TXDO
26GPIO4I/O, IPU
27GPIO3I/O, IPU
28GNDGroundGround
29SDIO_D2I/O
30SDIO_CMDO
31SDIO_D0I/O
32SDIO_CDISDIO, GPIO
33SDIO_WPIin module 10K resistor pull-up
34SDIO_D1I/O
35SDIO_CLKO
36SDIO_D3I/O
37REF_CLKO, IPDReference Clock Output

Notes: I:Input, O:Output, P: Power, IPU: Internal Pull Up, IPD: Internal Pull Down

4.2 Connecting with Audio Codec (I2S Interface)

The D10 module features a digital audio I2S interface and supports both master and slave modes for connecting with audio codecs.

Master Mode

In master mode, it is recommended to connect the D10 module with an audio codec IC for audio playback and recording. The current module firmware supports Wolfson WM8918/WM8960 codecs. A reference schematic is provided below for guidance.

Reference schematic for connecting with external audio IC
Figure 4.4: Conceptual diagram for connecting the D10 module with an external audio IC (e.g., Wolfson WM8918/WM8960). For detailed schematics, refer to the official MA88 Datasheet PDF.

Slave Mode

When the D10 module operates in I2S slave mode, it requires external inputs for both I2S_WS and I2S_CLK. For example, using MVSilicon's MCU/Codec chip AP8048/AP8064:

Case 1: Direct Connection

Wi-Fi, Bluetooth, or AUX IN can be directly connected to AP8048/8064. The AP8048 will determine the audio source (Wi-Fi/BT/AUX IN) to be output to the connected digital amplifier. Connect I2S DATA OUT of the D10 (A31) to I2S DATA IN of AP8048/8064. The I2S DATA OUT of AP8048 then connects to the amplifier. This setup allows for power saving by independently switching off Wi-Fi or Bluetooth.

Case 2: Multi-room Audio with Conversion

AUX IN and Bluetooth can be converted to digital I2S input for the D10 module by AP8048. These inputs can then be re-transmitted via Wi-Fi to other speakers and simultaneously output to a digital amplifier, enabling multi-room audio for Aux-in and BT sources. For connecting to an amplifier with digital input, I2S DATA OUT of AP8048 connects to DATA IN of D10, and DATA OUT of D10 connects to the amplifier. D10 handles data reception and re-transmission to slave speakers in multi-room playback. For analog input amplifiers, I2S DATA OUT of AP8048 connects to I2S DATA IN of D10, and I2S DATA OUT of D10 connects to I2S DATA IN of AP8048, with AP8048 outputting analog audio. Using an amplifier with analog input can improve sound quality via the EQ module in AP8048.

4.3 External Antenna

The D10 module utilizes an external antenna for optimal Wi-Fi performance. Select an antenna type that complies with the IEEE 802 b/g/n Wi-Fi standard for 2.4GHz frequency. Key parameters are listed below:

Item Parameter
Frequency range2.4~2.5GHz
Impedance50 Ohm
VSWR2 (Max)
Reflection loss-10dB (Max)

4.4 10/100M Ethernet Port

The D10 module includes 10/100Mbps Ethernet interface pins for connection to an RJ45 socket. It has a built-in transformer.

Connecting the module with RJ45

To enable 10/100Mbps Ethernet functionality, connect the module to an RJ45 socket via an Ethernet transformer. The detailed diagram below shows the reference design.

Reference design for Ethernet connection
Figure 4.5: Conceptual diagram for Ethernet connection. For detailed schematics, refer to the official MA88 Datasheet PDF.

4.5 USB Host Port

The D10 module provides a high-speed USB2.0 host interface. The reference design for connecting to a USB port is shown below.

USB host interface reference design
Figure 4.6: Conceptual diagram for USB host interface connection. For detailed design rules, refer to the table below.

USB Design Rule

Follow these design rules when populating the USB host interface:

Item Parameter
Signal GroupUSB
TopologyDifferential Pair Point-Point
Reference PlaneGround Referenced
Characteristic Trace Impedance (Zo)90 Ω ±10%
Trace Width4 mils
Serpentine Spacing (center to center)8.5 mils
Minimum Isolation Spacing to Clock Signals50 mils
Minimum Isolation Spacing to Low-Speed Signals20 mils
Minimum Isolation Spacing to other USB Pair20 mils
Total Length (with package length)Max=8000 mils
Maximum Recommended Via Count2 (per side)
DM to DP Length Matching (with package length)Match total length to within ±10 mils

4.6 Power Supply

The D10 module operates with a single power supply voltage between 3.5V and 5.5V. The peak current draw is approximately 300mA, with a normal working current of 170mA. In sleep mode (Wi-Fi off), the current is 20mA.

A stable power supply is crucial for system stability and Wi-Fi performance. It is recommended to use 100uF and 10uF decoupling capacitors in parallel to reduce power supply ripple.

5. Operating Instructions

5.1 Software Overview

The D10 module supports AirPlay and DLNA functionalities. Here's an overview of its software capabilities:

Item Description
iOS versioniOS 4.2 and above (iPhone, iPad, iPod Touch, iPad Mini)
iTunes versioniTunes 10.2 and above (PC, iMac)
Network setupMA88 works in AP Client mode, supports WPS and proprietary Wi-Fi setup
Support AirPlay modePlay, Pause, Seek, Volume, Prev, Next
AirPlay applicationsApple Music App, QQ Music, iTunes, Many third-party music applications
DLNA operationsPlay, Pause, Seek, Volume, Prev, Next
DLNA applicationsCompatible with DLNA certified players (e.g., Skifta, BubbleUPnP)
Audio format supportMP3, WMA, WAV, Apple Lossless (ALAC), AAC, AAC+, FLAC, APE, OGG
Browser supportPC: IE9/10, Chrome, Firefox; iOS/MAC OS: Safari
Language support of Web serverChinese, English
Setup with web serverSetup MA88 network, device name, password protection, firmware update, factory setting, online update, connect device to Internet

5.2 AirPlay and DLNA Streaming

AirPlay Introduction

AirPlay, developed by Apple Inc., allows wireless streaming from iOS devices to HDTVs or speakers. It is supported on iOS 4.2 and above, and OS X Mountain Lion. Music can also be streamed from PC or Mac via iTunes 10.1 or later. When your device (iMac, PC, iPod touch, iPhone, iPad) is on the same Wi-Fi LAN as the AirPlay-enabled speaker, the AirPlay button will appear in applications like iTunes or iOS music apps. Click the AirPlay button and select the speaker you wish to stream to.

DLNA Introduction

DLNA (Digital Living Network Alliance) is an organization that promotes seamless interoperability between consumer electronics, cellphones, and PCs. DLNA-certified devices, like the D10 module, can work seamlessly with other DLNA devices. The D10 module features the DLNA logo, indicating its compatibility.

5.3 WiFi Mode Configuration

The D10 module operates in WiFi AP Client mode. To set up AP client mode, use a web browser when connected to the device via Wi-Fi or Ethernet.

AP Client Mode

In AP Client mode, the device acts as both an Access Point (AP) and a client simultaneously. When it is used as an AP, other wireless devices can connect directly to it. As a client, it can connect to another wireless AP, functioning as a wireless station. This allows you to connect to the D10 module and play music via AirPlay or DLNA. If the D10 module is connected to a main wireless AP that provides Internet access, any device connected to the D10 module will also have Internet access.

D10 Multi-room music configuration and APP interface
Figure 5.1: The D10 module supports multi-room music configurations and is managed via an APP interface, allowing synchronized or different music playback in various rooms.

5.4 Web Server Setup

The D10 module features a built-in web server for configuration via an Internet browser.

Factory Mode Default Settings

In factory mode, the SSID of the D10's AP port is "WiFiAudio_xxxx" (where xxxx are four digital numbers). The default IP address, username, and password are:

Parameter Default Setting
SSIDWiFiAudio_xxxx
IP address10.10.10.254
Mask255.255.255.0
DNSLinkplay.com
User nameadmin
Passwordadmin

Web Server Login

To log in to the built-in web server, ensure your device is on the same network as the D10 module. Then, open an Internet browser and enter "http://10.10.10.254" or "http://Linkplay.com". The web server supports English and Chinese languages, configurable in the setup page.

If the D10 module is not connected to another AP for Internet access, the web server will direct you to the Wi-Fi setup page, where you can choose an AP to connect. If it's already connected, it will redirect to the general settings page.

Connecting the Module to Another AP

On the Wi-Fi setup page, you'll see network information, including the connected AP and a list of available APs. Select an AP to connect the module to the Internet. The module can simultaneously act as an AP client (bridge mode), allowing other devices to connect directly to it.

Screenshot of web interface for connecting to another AP
Figure 5.2: Web interface for connecting the D10 module to another AP, showing a prompt to input the wireless password. For actual screenshot, refer to the official MA88 Datasheet PDF.

After entering the password for the chosen AP, a pop-up message will remind you to ensure your device is on the same network as the D10 module (either directly connected or via the same AP).

Screenshot of web interface popup for network confirmation
Figure 5.3: Web interface popup confirming network connection, prompting to ensure the device is in the same network as the WiFi audio device. For actual screenshot, refer to the official MA88 Datasheet PDF.

6. Maintenance

6.1 Software Upgrade

Software upgrades are critical operations and should be performed with caution. During an upgrade, avoid playing music or performing any other operations. Do not disconnect power from the module during the process.

You can perform a manual software upgrade via the module's web server. Alternatively, if the device is connected to the Internet, you can use the "Check Online update" button on the software upgrade page. The module will then check for updated versions on the remote maintenance server.

Screenshot of web interface for manual firmware upgrade
Figure 6.1: Web interface for manually upgrading the D10 module firmware, showing options for firmware upgrade and online update. For actual screenshot, refer to the official MA88 Datasheet PDF.

6.2 WPS Setting

WPS (Wi-Fi Protected Setup) simplifies Wi-Fi setup. With a WPS-enabled router, you don't need to select the Wi-Fi SSID or enter a password. Simply press the button (PBC mode) on the router, and the module will join the network securely. To enter WPS mode on the D10 module, keep the "nReload" pin at a low pulse for 300ms to 5s.

6.3 Restore to Factory Setting

To restore the module to its factory settings, keep the "nReload" pin at a low pulse for more than 5 seconds. The system will reboot automatically once the factory settings are restored.

7. Troubleshooting

  • Connection Issues: Ensure the module is powered correctly (3.5V-5.5V). Verify Wi-Fi network settings via the web server. If connecting to an AP, ensure the password is correct and your device is on the same network.
  • Audio Playback Problems: Check audio codec connections (I2S Master/Slave mode). Ensure correct audio format is being used.
  • Firmware Update Failure: Do not interrupt power during firmware updates. Ensure a stable internet connection for online updates.
  • Module Unresponsive: Try restoring to factory settings by holding the "nReload" pin low for >5 seconds.

7.1 UART Debugging

For advanced debugging, the UART interface can be used with the following settings:

  • Baud rate: 57600
  • Data bit: 8
  • Parity bit: None
  • Stop bit: 1
  • Flow control: None (DTR/DSR, RTS/CTS)

8. Specifications

Category Item Parameter
WIFIStandard802.11 b/g/n 1T1R
Frequency2.412GHz-2.484GHz
Transmit Power802.11b: +20dBm (Max.); 802.11g: +18dBm (Max.); 802.11n: +15dBm (Max.)
Receive Sensitivity802.11b: -89dBm; 802.11g: -81dBm; 802.11n: -71dBm
AntennaExternal, I-PEX
Wi-Fi Working ModeAP Client (by default) / AP / STA
SecurityWEP/WPA-PSK/WPA2-PSK/WAPI
EncryptionWEP64/WEP128/TKIP/AES
SoftwareUser ConfigurationWeb browser, APP
Software UpdateWeb browser, APP
Online UpdateSupport
Audio SourceU disk, Smartphone/Tablet/PC, online contents
Applications SupportiOS, Android, Win 7/8
Audio Streaming ProtocolAirPlay, DLNA, Spotify Connect, QQ music Qplay
Multi-room AudioSupport AirPlay, Spotify Connect, DLNA, U Disk attached to WiFi device, BT and Aux-in multi-room transmission
OtherI2C24bit, up to 192KHz
Status LEDAP status, client status, power, WiFi data transfer
IO ExtensionEthernet, USB, UART, GPIO, I2C
Module Connector2.0x36Pin, Male
Power SupplyDC 3.5-5V
Power Consumption<320mA
Standby Power<20mA
Operating Temperature-20~50°C
Storage Temperature-40~125°C
Dimension (mm)38.7x28.5x3 without Pin

8.1 Electrical Characteristics

Parameter Symbol Test Conditions Min Type Max Unit
Supply InputVDD3.55.05.0V
Power consumptionIDD--320mA
Standby CurrentISC--20μA
Voltage Output "Low"VOL--0.6V
Voltage Output "High"VOH2.6--V
Voltage Input "Low"VIL--0.7V
Voltage Input "High"VIH2.7--V

8.2 Dimensions

The physical dimensions of the D10 module are provided below.

D10 Module Dimensions Diagram
Figure 8.1: Dimensions of the D10 module (38.7mm x 28.5mm x 3mm without pins). For detailed pin dimensions, refer to the official MA88 Datasheet PDF.

9. User Tips

  • Bluetooth Connectivity: The D10 module supports Bluetooth 5.0 for audio reception, allowing direct connection from Bluetooth-enabled devices.
  • Power Stability: Always ensure a stable power supply within the 3.5V-5.5V range and consider adding decoupling capacitors (100uF and 10uF in parallel) to minimize ripple for optimal performance.
  • Firmware Updates: Regularly check for online firmware updates via the web server to ensure you have the latest features and bug fixes.
  • Multi-room Setup: Utilize the multi-room audio feature for synchronized playback across multiple speakers, enhancing your audio experience.

10. Warranty and Support

The manufacturer reserves the right to change products and specifications without prior notice. This information does not convey any license by implication or otherwise under any patents or other rights. Application circuits shown, if any, are typical examples illustrating the operation of the devices and do not imply responsibility for any problems arising out of their use.

For further detailed technical information, schematics, and design notes, please refer to the official PDF datasheet: MA88 Wireless Smart Audio Module Datasheet (PDF).

© 2023 emiuzek. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.